Abstract:Inorganic phosphorous (as phosphate (PO43-), is one of the essential nutrients for all living forms, either terrestrial or marine. In oligotrophic seawaters, this macronutrient is limited (10-9 M) and its ratio with other elements (nitrogen or carbon) is denoting the health state of the marine environment; a small variation of its concentration can produce eutrophication. The gold standard method used for PO43- detection is based on colorimetric detection of phosphomolybdate. The colored complex is obtained by mixing water-soluble molybdenum salts (Mo(VI)) and reducing agents in acid media, along with the sample containing PO43-. Moreover, the kinetic of complex formation is slow, about 1 h is generally required for color to develop, exposing the assay to the drawbacks of interferences as those from silica. The detection is preferably performed in a controlled environment (i.e. in a laboratory) because several chemicals and steps of preparations are required as well as the optical instrumentation is not intended for in-field use. Electrochemical sensors offer portability and simplicity making them a practical option for on-site detection applications. To gain an analytical alternative in measuring low quantities of PO43- (10-9 M), and overcome some of the drawbacks of the classical approaches, we optimised a new easy way to produce a plastic electrode decorated with an alkyl Mo-polyoxometalate (Mo8O264-), that is soluble in organic solvents. This tetra-butyl-ammonium octamolybdate powder, [N (C4H9)4]4 Mo8O26, purposely synthetized was identified with FTIR, Raman, MS methods, and the electroactivity and reactivity with PO43- was confirmed in solution with cyclic voltammetry (CV). When the Mo-decorated electrode was in contact with PO43-, an electroactive phosphomolybdate aggregate formed at the electrode surface that was electrochemically detectable with square wave voltammetry (SWV). A remarkably low detection limit of 6.1 nM, to PO43-, as well as good stability and selectivity were obtained also in real samples. In fact, PO43- was measured in saline simulated and real seawater samples at nM concentrations in less than 5 min. The present investigation provides a new alternative to the current standard colorimetric methods to detect low phosphate concentrations, showing the potential to be used for monitoring nutrients in oligotrophic seawater.

Determination Of Total Phosphorus In Water Based On Nanometer Titanium Dioxide Film Photocatalytic Oxidation With Electrochemical Method

Determination of Total Phosphorus in Water Sample by Digital Imaging Colorimetry

Determination of Chemical Oxygen Demand Based on Photoelectrocatalysis of Nanoporous Tio2 Electrodes

Electrochemical impedance sensor based on nano-cobalt-oxide-modified graphenic electrode for total phosphorus determinations in water

Improvement on Spectrophotometry Method for Determining Organophosphorus Pesticide Residues in Water

Study on Cancellation of Arsenic Interference in Determination of Total Phosphorus in Water by Ammonium Molybdate Spectrophotometry

Determination of Inorganic Phosphate in Environmental Water Using Cobalt Film Modified Ionic Liquid-Carbon Paste Electrode

Ozone-Based Photoactivated Synergistic Digestion Method for the Determination of Total Dissolved Phosphorus in Water

A novel approach for determining total titanium from titanium dioxide nanoparticles suspended in water and biosolids by digestion with ammonium persulfate

Highly selective capture and efficient concentration of trace titanium dioxide nanoparticles in environmental waters by phosphorylated ferroferric oxide

Photoelectrocatalytic COD determination method using highly ordered TiO2 nanotube array

Ratiometric Fluorescent Sensing of Phosphate Ion in Environmental Water Samples Using Flavin Mononucleotide-Functionalized Fe3O4 Particles

Developing of Micro Photocatalytic Oxidation Reactor and Application in the Determination of Trace Organic Phosphorous in Water

Molecularly imprinted polymer photoelectrochemical sensor for the detection of triazophos in water based on carbon quantum dot-modified titanium dioxide

Self-assembly of Ag-phosphotungstic acid composite nanoparticles on a modified ITO electrode for the electrochemical detection of 4-chlorophenol

Trace-Level Sensing of Phosphate for Natural Soils by a Nano-Screen-Printed Electrode

Plastic electrode decorated with polyhedral anion tetrabutylammonium octamolybdate [N(C4H9)4]4 Mo8O26 for nM phosphate electrochemical detection

Determination of the total antioxidant capacity of the Chinese tea based on a novel "peroxidase/zirconium phosphonate"composite electrochemical sensor

Modification of ammonium molybdate spectrophotometric method for measurement of dissolved phosphorus

Detection of Phosphate in Human Blood Based on a Catalytic Hydrogen Wave at a Molybdenum Phosphide Modified Electrode.

Persulfate Wet Oxidation Method for the Determination of Total Phosphorus in Atmospheric Aerosols and Its Application for a Year-round Observation in Beijing