Abstract:Steam reforming of bio-oil derived oxygenates is a green and sustainable method for hydrogen production. In this work, hydrogen production from steam reforming of acetic acid (SRAA) was investigated over Ti-modified Ni/Attapulgite (ATP) catalysts that prepared via sequential precipitation technique. The effects of Ti additive, precipitation sequence and Ti-salt precursors (TiCl4, TiOSO4) on the structural and physicochemical properties of catalysts were characterized by N2 adsorption-desorption, XRD, FT-IR, HRTEM, XPS, H2-TPR and NH3-TPD. These results indicated that the interaction among Ti species, Ni active metal and ATP enhanced the reduction performance as well as weakened surface acidity of the Ni/ATP catalyst, and also promoted the electron transfer to form Niδ− species. Obviously, compared with Ti precursor salts, the precipitation sequences played a key role in determining the surface properties of Ti-modified catalysts. Among them, the Ni–TiS/ATP catalyst synthesized by co-precipitation method exhibited better reducibility and lower surface acidity, as well as produced more Niδ− species and Niδ−-Ov-Ti3+ interface sites. Then the synergistic effects among the above-mentioned characters made the Ni–TiS/ATP catalyst present highest carbon conversion (93.4%) and H2 yield (77.6%) during SRAA reactions. The analyses of XRD, HRTEM and TG were implemented on used catalysts and discovered Ni–TiS/ATP catalysts shown promising metal sintering and coke resistance, which mainly caused by the presence of flat Ni– structures. The possible conversion mechanism of acetic acid in the flat Ni– structure of co-precipitation Ti-modified catalyst was also elucidated.

Effects of Current Upon Hydrogen Production from Electrochemical Catalytic Reforming of Acetic Acid

Hydrogen Production from the Current-Enhanced Reforming and Decomposition of Ethanol

Hydrogen Production by Catalytic Reforming of Acetic Acid-Simulacrum of Pyrolysis Bio-Oil

High Efficient Production of Hydrogen from Bio-oil Using Low-temperature Electrochemical Catalytic Reforming Approach over NiCuZn–Al2O3 Catalyst

Catalytic Reforming of Acetic Acid As a Model Compound of Bio‐oil for Hydrogen Production over Ni‐CeO2‐MgO/olivine Catalysts

Hydrogen production via acetic acid steam reforming over HZSM-5 and Pd/HZSM-5 catalysts and subsequent mechanism studies

Hydrogen Production Via Catalytic Reforming of the Bio-Oil Model Compounds: Acetic Acid, Phenol and Hydroxyacetone

Hydrogen Production Via Steam Reforming of Acetic Acid over Biochar-Supported Nickel Catalysts

Influences of Ni/CeO2 Morphologies on Steam Reforming for Acetic Acid-a Model Compound of Bio-Oil

Sustainable hydrogen production and CO2 mitigation from acetic acid dry reforming over Ni/Al2O3 catalyst

Hydrogen production from acetic acid decomposition as bio-oil model molecule over supported metal catalysts

Hydrogen Production through Distinctive C‐C Cleavage during Acetic Acid Reforming at Low Temperature

A Comparative Research on the Catalytic Activity of La2O3 and Γ-Al2o3 Supported Catalysts for Acetic Acid Steam Reforming

H2 produced by catalytic reforming of acetic acid over Ni/char catalyst recycled from the biochar adsorption purification of simulated Ni electroplating wastewater

Steam Reforming of Acetic Acid for Hydrogen Production: Thermodynamic Calculations

Electrochemically assisted biohydrogen production from acetate

Reaction Induced Ni/MgTi2O5 Interface Promotes the Resistance to Sintering and Oxidation in Auto-Thermal Reforming of Acetic Acid

Hydrogen production from acetic acid steam reforming over Ti-modified Ni/Attapulgite catalysts

Reaction Mechanisms and Production of Hydrogen and Acetic Acid from Aqueous Ethanol Using a Rn-Sn/TiO2 Catalyst in a Continuous Flow Reactor

Effect of La 2 O 3 Replacement on Γ-Al 2 O 3 Supported Nickel Catalysts for Acetic Acid Steam Reforming

Paired Electrosynthesis of H2 and Acetic Acid at A/cm2 Current Densities