Abstract:Gasification of heavy petroleum residues can convert low-value feedstock to hydrogen-rich syngas, which can further be used for power generation and/or chemical production. The present work proposed an updated functional-group-based approach (FGMech) to modeling the gasification of a vacuum residue oil (VRO), which is helpful for better understanding the detailed kinetics of the gasification and improving gasifier performance. Elemental, average molecular weight (AMW) and nuclear magnetic resonance (NMR) analyses were conducted experimentally to characterize VRO, including elemental composition, average molecular formula and the functional group distribution, which were further used for model construction. A lumped mechanism for VRO devolatilization was constructed based on the updated FGMech approach: stoichiometric parameters of stable gases, tars and char were obtained from experiments, while those of radicals were based on the multiple linear regression (MLR) correlations; thermodynamic and kinetic parameters were derived from Benson group additivity method and rate rules, respectively. A merged detailed model was adopted for describing the conversion of gases and tars, and a global model was used for char. To test the reliability of the present model approach, Orimulsion gasification experiments from literature were simulated using an integrated perfectly stirred reactor (PSR) and plug flow reactor (PFR) model. It shows that the present model can reasonably predict measured results under various equivalence ratios, and has better performance on the prediction of CH4 compared with most literature models. Based on model analyses, syngas comes from the conversion of C2H4, H2S, CH4 and char in different gasification stages. Benzene, toluene, naphthalene and 1-methylnaphthalene are initial tar species considered in the devolatilization of the VRO. They can undergo hydrogen abstraction acetylene addition (HACA) and C3H3/C5H5 addition reaction pathways to produce large PAHs.

Five Lumped Kinetic Models of Liquefied Petroleum Gas under Aromatization Reaction Conditions

Eight Lumps Kinetic Model for Residual Oil Catalytic Cracking

Lumped Kinetics Model and Its On-Line Application to Commercial Catalytic Naphtha Reforming Process

Kinetic Model for Hydroisomerization Reaction of C8-aromatics

Kinetic model for hydroisomerization reaction of C<sub>8</sub>-aromatics

A Seven Lumped Kinetic Model for Industrial Catalyst in DMTO Process

Kinetic Modeling of C2–C7 Olefins Interconversion over ZSM-5 Catalyst

Kinetic Model and Simulation Analysis for Toluene Disproportionation and C9-Aromatics Transalkylation

Study on Complex Reaction Network and Kinetic Model of a Methanol to Propene Process

Thermodynamic Analysis of Propane Aromatization

Kinetic Modeling with Automatic Reaction Network Generator, an Application to Naphtha Steam Cracking

Lumping Strategy in Kinetic Modeling of Vacuum Pyrolysis of Plant Oil Asphalt

A molecular kinetic model for heavy gas oil catalytic pyrolysis to light olefins

Heavy Fuel Oil Pyrolysis: A Family of Practical Kinetic Reaction Models Supported by TGA

Molecular-level Reaction Network in Delayed Coking Process Based on Structure-Oriented Lumping

Chemical Kinetic Model for Polycyclic Aromatic Hydrocarbon Formation During Gasoline Surrogate Fuel Combustion

Kinetic Model of Olefins/Isobutane Alkylation Using Sulfuric Acid as Catalyst

An updated functional-group-based approach to modeling the vacuum residue oil gasification kinetics

A comprehensive study on kinetics for hydrogen generation from aquathermolysis gasification of heavy crude oil

Microkinetic Modeling of the Homogeneous Thermal Oligomerization of Ethylene to Liquid-Fuel Range Hydrocarbons

A Comparative Study of the Formation of Aromatics in Rich Methane Flames Doped by Unsaturated Compounds