Abstract:Background: In clinical practice, control of the marginal fit of fixed dental prostheses is hindered by evaluation method, which needs to be further improved to increase its clinical applicability. This study aimed to quantitatively analyze the absolute marginal discrepancy of three-unit ceramic fixed dental prostheses fabricated by conventional and digital technologies using a digital measurement method based on the digital impression technology and open source software. Methods: A digital workflow and the conventional impression combined with the lost-wax heat-pressed technique were adopted to separately fabricate 10 glass ceramic fixed dental prostheses. Three-dimensional data for the abutments, fixed dental prostheses, and fixed dental prostheses seated on the abutments, were obtained using a dental scanner. The two datasets were aligned using registration technology, specifically "multi-points registration" and "best fit alignment," by reverse engineering software. Subsequently, the three-dimensional seated fit between the fixed dental prostheses and abutments were reconstructed. The margin of the abutment and crown was extracted using edge-sharpening and other functional modules, and the absolute marginal discrepancy was measured by the distance between the margin of the abutment and crown. One-way analysis of variance was used to statistically analyze the measurement results. Results: Using the digital measurement method, the mean value of absolute marginal discrepancy for fixed dental prostheses fabricated by the conventional method was 106.69 ± 6.46 μm, and that fabricated by the digital workflow was 102.55 ± 6.96 μm. The difference in the absolute marginal discrepancy of three-unit all-ceramic fixed dental prostheses fabricated using the two methods was not statistically significant (p > 0.05). Conclusions: The digital measurement method for absolute marginal discrepancy was preliminarily established based on open source software and applied in three-unit ceramic fixed dental prostheses. The absolute marginal discrepancy of three-unit ceramic fixed dental prostheses fabricated using digital technology was comparable to that of conventional technique.

Digital Measurement Best-Fitting

Registration Error Analysis and Evaluation in Large-Volume Metrology System

3D Measuring Points Registration Based on Datum-Points in Reverse Engineering

Digital measurement method for comparing the absolute marginal discrepancy of three-unit ceramic fixed dental prostheses fabricated using conventional and digital technologies

An Automatic Registration Approach to Laser Point Sets Based on Multidiscriminant Parameter Extraction

Data Registration Method for Multiple-Sensor Integrated Measurement System

Volumetric Error Modeling And Analysis For Cnc Machine Tool Based On Multi-Body System

Point Set Registration Based On Implicit Surface Fitting With Equivalent Distance

Automatic Remote Sensing Image Registration Algorithm Based on SIFT

CAD-based Model Directive Registration Between Complex Surface and Measurement Pointcloud

Application of a New Measuring Method to Large Size Measurement in an Automobile Panel

Data Registration in 3-D Scanning Systems

Research on Digital Measurement Technology Based on Point Cloud Data of Complex Surfaces

A Combined Measurement Method for Large-Size Aerospace Components

A Registration Algorithm of Infrared and Visible Images Based on Revised Measure Function

Analysis of Registration Algorithm for Two-dimensional Multi-sensor Error

High-accuracy Point Cloud Registration for 3D Shape Measurement Based on Double Constrained Intersurface Mutual Projections

A Calibration Method of Micromanipulation System Based on Digital Image Processing

Combined measuring method in large scale measurement

Study of Registration Pont Cloud to CAD Model Based on Genetic Algorithm

Multi-sensor registration method based on a composite standard artefact