Abstract:A new method for online measurement of pulp Kappa number by means of near infrared diffuse reflectance spectroscopy and support vector machine (SVM) modeling has been developed in this paper. The near infrared diffuse reflectance spectroscopy of 45 Chinese red pine wood pulp samples was acquired. Selecting the absorption rates in 15 vibration absorption peaks of each sample and using dynamic independent component analysis (DICA) to distill the characters of input sample data, the pulp Kappa number predictive model based on SVM was built. From the whole 45 samples, 35 samples was selected to be the calibration set, and the predictive set consisted of the other 10 samples was used to validate the the pulp Kappa number predictive model. The external validation standard deviation is 0.26 for pulp Kappa number predictive model based on SVM, and the determining factor is 0.93 for the model. The internal cross validation standard deviation is 0.22 for pulp Kappa number predictive model based on SVM, and the determining factor is 0.96 for the model. To analyze the effectiveness of SVM method used to build the pulp Kappa number predictive model, the pulp Kappa number predictive model based on linear regression (LR) was also established. The external validation standard deviation is 0.45 for the model based on linear regression (LR), and the determining factor is 0.81 for the model. The internal cross validation standard deviation is 0.41 for the model based on linear regression (LR), and the determining factor is 0.85 for the model. For the 10 test samples, the pulp Kappa number predictive model based on Linear regression (LR) and the model based on SVM all have certain predictive accuracy, but the later higher. The experiment results not only show the feasibility and effectiveness of the near infrared measurement method for pulp Kappa number, but also validate that the pulp Kappa number predictive model based on SVM is more accurate and robust than linear regression model.

Online Monitoring of Kappa Number During Batch Pulping by Visible Spectroscopy

Study of On-line Pulp Kappa Number Determination with Spectrometry During Batch Pulping

Measuring and Controlling Model of Pulp Kappa Number with Spectroscopy During Batch Sulfite Pulping Process

Study of on-line measurement of pulp Kappa number with spectrometry during pulping

Investigation Of Delignification In Sulfite Cooking Process With Visible Spectroscopy

[The Online Measurement for Pulp Kappa Number Based on Near Infrared Spectroscopy and Support Vector Machine].

Mathematical Model for On-Line Measurement of Pulp Kappa Number

Kappa Number Prediction by Hybrid Model for Batch Pulp Cooking Process

Monitoring the kappa number of bleached pulps based on FT-Raman spectroscopy

Research Progress of On-Line Measurement of Kappa Number During Pulping

On-Line Determination of Kappa Number with Near-Infrared Spectroscopy

The Application of Chemometric Methods in Optical Quantitative Determination of Pulp Kappa Number

Prediction Model For Kappa Number In Whole Stalk Kenaf Kraft Pulping

Soft Sensing Method for the Kappa Number of Pulp Under Complex Working Conditions

Prediction model and in-digester control of residual alkali content in black liquor during kraft pulping of eucalyptus

Rapid NIR Measurement of Kappa Number and Moisture Content of Eucalyptus Kraft Pulp

Oxalate Formation Rules During Oxygen Delignification of Kraft Pulp

Study on the Influence of Kraft Pulp Consistency on the Pulp Reflecting Spectrum

Investigation of the Chemistry of Oxygen Delignification of Low Kappa Softwood Kraft Pulp Using an Organic/Inorganic Chemical Selectivity System

Analysis of Mixed Pulping Raw Materials of Eucalyptus Globulus and Acacia Mangium by Near Infrared Spectroscopy Technique Combined with LASSO Algorithm

Oxygen delignification of bamboo kraft pulp with high kappa number