Abstract:Stirling-type pulse tube cryocoolers (SPTCs) working at liquid-helium temperatures are attractive in space applications because they have advantages of high reliability, compactness, etc. However, the refrigeration efficiency is as low as 0.5% of Carnot efficiency or less. A method of increasing the cross-sectional area of the regenerator at the colder part is proposed in this paper, so as to reduce the heat-associated enthalpy flow at the cold end and improve the performance of the regenerative refrigerators at liquid-helium temperatures, and it is verified through experiments for the first time. Two kinds of variable cross-sectional structures are used in the experiments, which both increase the volume of the regenerator at the colder part. The no-load temperature of the refrigerator reaches 3.87 K, which is about 0.14 K lower than that of the refrigerator with a uniform cross-sectional regenerator under the same working conditions, and the coefficient of performance (COP) is increased by 66% at 4.2 K, and the precooling temperature is 16 K in this case. Theoretical analyses show that there are several reasons for reducing the heat-associated enthalpy flow at the cold end, including: (1). increase of the heat transfer area between the working fluid and the matrix; (2). increase of the total heat capacity of the matrix at the cold end. It is found that the lower the refrigeration temperature, the more serious the real gas effect, resulting in a more significant improvement. However, the increase in the cross-sectional area causes some side effects of reducing both the impedance of the regenerator and the flow rate of the working gas, resulting in a lower heat transfer coefficient. A smaller benefit is got as the refrigeration temperature rises, and the improvement of the COP tends to vanish at about 6 K. It is also found that the performance improvement is more significant when the regenerative efficiency is lower. This new method should provide a reference for further improving the performance of the regenerative refrigerator at liquid-helium temperatures.

Influence of Working Fluids and Regenerator Parameters on Performance of Stirling Refrigerator

Research and development of Stirling cryogenic refrigerator

Simulation and analysis of influence of pressure ratio on regenerator performance

Varying Cross-Sectional Area of Regenerator for Improving Efficiency of 4 K Pulse Tube Refrigerator

Varying the Cross-Sectional Area of the Regenerator for Improving the Refrigeration Efficiency at Liquid-Helium Temperatures

Influence of heat bridge on performance of thermally coupled two-stage Stirling-type pulse tube refrigerator

Improvement of a Stirling type two-stage pulse tube cryocooler

Experimental and numerical study on a heat-driven direct-coupled Stirling refrigerator

Experimental Results of the Internal Process of A Double Inlet Pulse Tube Refrigerator

13 K Thermally Coupled Two-Stage Stirling-Type Pulse Tube Refrigerator

Development And Analysis Of A 4.2k G-M Refrigerator

Investigation Of A 2-Stage Solvay Refrigerator With Magnetic Material Regenerator

An Experimental Investigation on Pulse Tube Refrigeration with Mixture Fluids

A general model of Stirling refrigerators and its verification

Performance of a beta Stirling refrigerator with tubular evaporator and condenser having inserted twisted tapes and driven by a solar energy heat engine

Cool Down Time Optimization of the Stirling Cooler

Simulation and experimental study of pulse tube cooler driven by thermoacoustic engine

Cooling Performance Measurement of the Reverse Application of A Coaxial Free-Piston Stirling Engine

Study On Two-Component Gas Mixture In Regenerative Refrigerators

Program design for regenerator of a Stirling cooler

Varying the cross-sectional area of the regenerator for improving the efficiency of the 4 K pulse tube refrigerator