Abstract:Background: Neural stimulation is an important method used to activate or inhibit action potentials of the neuronal anatomical targets found in the brain, central nerve and peripheral nerve. The neural stimulator system produces biphasic pulses that deliver balanced charge into tissue from single or multichannel electrodes. The timing and amplitude of these biphasic pulses are precisely controlled by the neural stimulator software or imbedded algorithms. Amplitude mismatch between the anodic current and cathodic current of the biphasic pulse will cause permanently damage for the neural tissues. The main goal of our circuit and layout design is to implement a 16-channel biphasic current mode programmable neural stimulator with calibration to minimize the current mismatch caused by inherent complementary metal oxide semiconductor (CMOS) manufacturing processes. Methods: This paper presents a 16-channel constant current mode neural stimulator chip. Each channel consists of a 7-bit controllable current DAC used as sink and source current driver. To reduce the LSB quantization error and the current mismatch, an automatic calibration circuit and flow diagram is presented in this paper. There are two modes of operation of the stimulator chip-namely, stimulation mode and calibration mode. The chip also includes a digital interface used to control the stimulator parameters and calibration levels specific for each individual channel. Results: This stimulator Application Specific Integrated Circuit (ASIC) is designed and fabricated in a 0.18 μm High-Voltage CMOS technology that allows for ±20 V power supply. The full-scale stimulation current was designed to be at 1 mA per channel. The output current was shown to be constant throughout the timing cycles over a wide range of electrode load impedances. The calibration circuit was also designed to reduce the effect of CMOS process variation of the P-channel metal oxide semiconductor (PMOS) and N-channel metal oxide semiconductor (NMOS) devices that will result in charge delivery to have less than 0.13% error. Conclusions: A 16-channel integrated biphasic neural stimulator chip with calibration is presented in this paper. The stimulator circuit design was simulated and the chip layout was completed. The chip layout was verified using design rules check (DRC) and layout versus schematic (LVS) design check using computer aided design (CAD) software. The test results we presented show constant current stimulation with charge balance error within 0.13% least-significant-bit (LSB). This LSB error was consistent throughout a variety stimulation patterns and electrode load impedances.

Programmable Multichannel Electrophysiological Stimulator Based on MCU and CPLD Platform

Multi-site Closed-loop Stimulation Strategy for Seizure Control with a Generalized Neurostimulator

Design Of A Compact Wireless Multi-Channel High Area-Efficient Stimulator With Arbitrary Channel Configuration

Design of Multipath Transcranial Alternating Electrical Stimulator

A Circuit System Design for Implantable Multi-channel neural stimulator

A low-power, 16-channel implantable neurostimulator

16-Channel biphasic current-mode programmable charge balanced neural stimulation

[A Design of Electrophysiological Stimulator].

MEDUSA: A Low-Cost, 16-Channel Neuromodulation Platform with Arbitrary Waveform Generation

A Wirelessly Programmable Chip for Multi-Channel Neural Stimulation

Multimodal Wireless-Powered Flexible System for Closed-Loop Neuromodulation

A Versatile Hermetically Sealed Microelectronic Implant for Peripheral Nerve Stimulation Applications

Flexible Electronics and Materials for Synchronized Stimulation and Monitoring in Multi-Encephalic Regions

A Real-Time Hardware Experiment Platform for Closed-Loop Electrophysiology

A Programmable and Implantable Neuro-stimulator

A wireless stimulator system-on-chip with an optically writable ID for addressable cortical microimplants

Patterned Electrical Brain Stimulation by a Wireless Network of Implantable Microdevices

Flexible Multi-Channel Microelectrode with Fluidic Paths for Intramuscular Stimulation and Recording

Advanced Design and Implementation of a 2-Channel, Multi-Functional Therapeutic Electrical Stimulator

A Multi-Channel Stimulator With High-Resolution Time-to-Current Conversion for Vagal-Cardiac Neuromodulation

A 0.042 mm^2 programmable biphasic stimulator for cochlear implants suitable for a large number of channels