Abstract:In this study LiFePO4/C composite particles were synthesized using five different carbon sources via a one-step sol-gel method. La-doped LiFePO4 was also synthesized using the sol-gel method. The XRD pattern of LixLayFePO4 (x = 0.9~1.0, y = 0~0.1) after being calcined at 700 °C for 10 h indicates that as the doping ratio increased, the sample's cell volume first increased then decreased, reaching a maximum value of 293.36 Å3 (x = 0.94, y = 0.06). The XRD patterns of Li0.92La0.08FePO4 after being calcined at different temperatures for 10 h indicate that with increasing calcination temperature, the (311) diffraction peak drifted toward a smaller diffraction angle. Similarly, the XRD patterns of Li0.92La0.08FePO4 after being calcined at 700 °C for different durations indicate that with increasing calcination times, the (311) diffraction peak drifted toward a larger diffraction angle. The infrared spectrum pattern of LixLayFePO4 (x = 0.9~1.0, y = 0~0.1) after being calcined at 700 °C for 10 h shows absorption peaks corresponding to the vibrations of the Li–O bond and PO43- group. An SEM analysis of LixLayFePO4 (x = 1, y = 0; x = 0.96, y = 0.04; x = 0.92, y = 0.08) after being calcined at 700 °C for 10 h indicates that the particles were irregular in shape and of uniform size. The hysteresis loops of Li0.92La0.08FePO4 after being calcined at 600 °C, 700 °C, or 800 °C for 10 h indicate that with increasing calcination temperature, the Ms gradually increased, while the Mr and Hc decreased, with minimum values of 0.08 emu/g and 58.21 Oe, respectively. The Mössbauer spectra of LixLayFePO4 (x = 1, y = 0; x = 0.96, y = 0.04; x = 0.92, y = 0.08) after being calcined at 700 °C for 10 h indicate that all samples contained Doublet(1) and Doublet(2) peaks, dominated by Fe2+ compounds. The proportions of Fe2+ were 85.5% (x = 1, y = 0), 89.9% (x = 0.96, y = 0.04), and 96.0% (x = 0.92, y = 0.08). The maximum IS and QS of Doublet(1) for the three samples were 1.224 mm/s and 2.956 mm/s, respectively.

XAS study of LiFePO4 synthesized by solid state reactions and hydrothermal method

Phase Separations in LiFe1–xMnxPO4: A Random Stack Model for Efficient Cathode Materials

Solid State Synthesis of LiFePO 4 Studied by in Situ High Energy X-ray Diffraction

Role of PO4 tetrahedron in LiFePO4 and FePO4 system.

Synthesises, Characterizations and Electrochemical Properties of Spherical-Like LiFePO4 by Hydrothermal Method

Molecular Crystal Structure Simulations and Structure- Magnetic Properties of LiFePO4 Composite Particles Optimized by La

Investigation of Electronic Conductivity and Occupancy Sites of Mo Doped into Lifepo4 by Ab Initio Calculation and X-Ray Absorption Spectroscopy

Synthesis and Electrochemical Performance of Xlifepo_4·yli_3v_2(po_4)_3 Composites

Electrochemical comparison of LiFePO4 synthesized by a solid-state method using either microwave heating or a tube furnace

Morphology and Reaction Mechanism of LiFePO4 Prepared by Hydrothermal Synthesis

Synthesis of nano FePO 4 and electrochemical characterization of composite cathode material LiFePO 4/C

Synthesis of LiFePO4/C composite electrode with enhanced electrochemical performance

Synthesis and Characterization of LiFePO4 by a New Synthetic Route

Synthesis of LiFePO 4 /C Composite Electrode with Enhanced Electrochemical Performance

Structure and Magnetic Properties of AO and LiFePO4/C Composites by Sol-Gel Combustion Method

Physical and electrochemical properties of la-doped lithium iron phosphate electrodes

Physical and electrochemical properties of La-doped lithium iron phosphate

Insight into fine structures of LiFexMn1-xO2 by synchrotron radiation-based X-ray absorption spectroscopy

High rate delithiation behaviour of LiFePO 4 studied by quick X-ray absorption spectroscopy

Physical and Electrochemical Properties of La doped Lithium Iron Phosphate Electrodes

Phase Transformation and Lithiation Effect on Electronic Structure of Li(x)FePO4: an In-Depth Study by Soft X-ray and Simulations.