Abstract:In order to solve the problem that temperature sensor laying is complex and maintenance cost is high in the large-scale, multi-point real-time temperature monitoring process, the temperature monitoring system based on Fiber Bragg Grating was designed and developed. Using wavelength selectivity by optical fiber diffraction grating, a function of temperature and wavelength was established. Temperature of the measured position was inversed by calculating the wavelength variation through the optical fiber Bragg grating. Due to environmental, materials and other factors, the spectral distribution and temperature changes do not satisfy linear relationship. Therefore, designed the spectrum correction algorithm was designed, and function curve fitting of wavelength and temperature was completed with a degree of fitting greater than 99.7%. Experiments used FB136L-IAC-proof oven, LPT-200 diode, and 1 550 nm optical fiber to detect 20 to 280 degrees C temperature range of multi-point in real-time. The results show that when the temperature is changed by 1 degrees C, the corresponding center wavelength shifts about 0.04 nm to longer wavelengths. Compared with the test data from standard device, the error is less than +/- 0.3 degrees C. Meanwhile, the spectral correction algorithm was applied to the system to further improve the uniformity and accuracy of the temperature detection. Because the system uses fiber-optic sensor network, it has a strong anti-electromagnetic interference capability. The diffraction grating can achieve precise measurements, so it has big dynamic range and high accuracy. The innovation of the system is to ensure high-precision measurements, while still satisfy large-scale, multi-point, high anti-jamming capability of rapid laying, and has a strong practical value.

Study on Temperature Compensation for Matched Grating Interrogation System

The Analysis of Temperature Effect and Temperature Compensation of Moems Accelerometer Based on A Grating Interferometric Cavity

Study on the Measurement System of Temperature-Compensated In-Fiber Bragg Gratings Strain Sensor

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

Temperature Compensation in Strain Measurement Using Erbium-doped Fluorescent Fiber Gratings

Study on Optimization of Output Element of Matched Grating Interrogation System

Study of Fiber Grating Displacement Sensor

Study on FBG Coupling Effects and Absolute Temperature Compensation Technique Based on Long-term Monitoring Data

A Novel Fiberg Grating Sensing and Demodulating System with Temperature Compensation

[Research on spectrum correction algorithm of temperature measurement system based on FBG]

High-precision temperature-compensated fiber Bragg grating axial strain sensing system based on a dual-loop optoelectronic oscillator with the enhanced Vernier effect

A novel integrated sensing structure based on double quartz tubes stepped fiber grating and its theoretical study on temperature sensing performance

A Cheap and Practical FBG Temperature Sensor Utilizing a Long-Period Grating in a Photonic Crystal Fiber

Techniques of Temperature Compensation for Fbg Strain Sensors Used in Long-Term Structural Monitoring

Temperature-compensating multiple fiber Bragg grating strain sensors with a metrological grating

A diaphragm-type fiber Bragg grating pressure sensor with temperature compensation

Differential temperature compensation method for edge filtering strain sensors

Passive Temperature-Compensating Technique for Microstructured Fiber Bragg Gratings

Research on the Temperature Compensation Technology of Quasi-Distributed Fiber Bragg Grating

Cantilever vibration sensor based on Fiber Bragg Grating temperature compensation

A Temperature Self-Adapting Fiber Bragg Grating Dynamic Sensor System