Abstract:A core‐shell structured cationic waterborne polyurethane (WPU) emulsions with high solid content were generated by mixing, neutralizing and emulsifying of prepolymer A without hydrophilic groups and prepolymer B with hydrophilic groups. In this study, core‐shell structured cationic waterborne polyurethane (WPU) dispersions with high solid content were prepared. To this end, prepolymer A was synthesized from polytetramethylene ether glycol (PTMG), isophorone diisocyanate (IPDI), castor oil (CO) and 1,4‐butanediol (BDO) without integration of the hydrophilic groups. Prepolymer B with hydrophilic groups was prepared from PTMG, IPDI, CO, BDO and N‐methyldiethanol amine (MDEA). WPU dispersion with a core‐shell structure could be generated by mixing, neutralizing, and emulsifying of the prepolymer A and the prepolymer B. The results indicated that the generation of WPU dispersions through this technique exhibited a milky appearance while the pH values range from 5.30 to 5.60. The optimal combination of prepolymer A and prepolymer B (at a ratio of 5:5) resulted in a dispersion with the highest solid content (50.4%), lowest viscosity (69 mPa·s), and narrowest particle size distribution. As the proportion of prepolymer A to prepolymer B decreases, the tensile strength of WPU film reduces while the elongation at break and glass transition temperature increases. Moreover, initially the contact angle with water was decreased instead of increase. However, modifications in a ratio of prepolymer A and B was not showed any significant impact on the thermal stability performance of the WPU films.

Effect of Preparation Technology on Emulsion Viscosity and Particle Size of Waterborne Polyurethane

Synthesis and Application of Hydroxyethyl Methacrylate Modified Waterborne Polyurethane

Preparation, mechanical properties of waterborne polyurethane and crosslinked polyurethane‐acrylate composite

Influence of preparation method on adhesion and drying performances of polyurethane dispersion

Preparation and Properties of High Solid Content and Low Viscosity Waterborne Polyurethane—Acrylate Emulsion with a Reactive Emulsifier

Study on preparation and properties of transparent waterborne polyurethane based on polyester polyols

Synthesis and characterization of waterborne polyurethane emulsions based on poly(butylene itaconate) ester

Preparation, Thermal Property and Morphology Analysis of Waterborne Polyurethane-Acrylate

Preparation, Characterization, and Property Analysis of Environmentally Friendly Waterborne Polyurethane-Acrylate

Research of Synthesis and Properties Anionic Water-Borne Polyurethane Type Polyether Emulsion

Preparation and Characterization of Waterborne Polyurethaneurea Composed of C9-diol-based Polyester Polyol

Preparation and characterization of high solid content cationic waterborne polyurethane with core‐shell structures

Preparation and Properties of Water-borne Cationic Polyurethane

Effects of aminopropyl-terminated polydimethylsiloxane on structure and properties of waterborne polyurethane-acrylate

Preparation and properties of polyester diol and waterborne polyurethane

Synthesis Technology and Properties of Waterborne Polyurethane Modified by Epoxy Resin

Preparation, properties and application of waterborne hydroxyl-functional polyurethane/acrylic emulsions in two-component coatings

Effect of Water Content on the Aggregation and Adhesion Properties of Waterborne Polyurethane

Preparation and Characterization of Aqueous Oil-Modified Polyurethane

Preparation and Characterization of Polyol - Anionic Waterborne Polyurethane Adhesive

Design, Preparation and Properties of Polyurethane Dispersions via Prepolymer Method