The Application and Design of Magnetic Transmission

廖伟强,张斌,曾德长

DOI: https://doi.org/10.3969/j.issn.1001-0785.2007.04.015

2007-01-01

Abstract:The development and status quo of magnetic transmission were introduced, the basic step and gist were talked about. The structure and magnetic circuit of a driving device was designed according to the requirement, and the work point was checking calculation.

What problem does this paper attempt to address?

Magnet circuit design and optimization of giant magnetostrictive transducer

Ming-fan LI,Zhan-qin XIANG,Fu-zai LV

DOI: https://doi.org/10.3785/j.issn.1008-973X.2006.02.003

2006-01-01

Abstract:To optimize the electromagnetic performance of giant magnetostrictive transducer, the effects of coil's geometry and magnetic circuit components on the transducer's magnetic field characteristics and displacement output were studied, and the magnetic circuit's loss and the gap's magnetic permeability were also analyzed. The appropriate coil structure parameters were presented, and an optimized design scheme was proposed in which pure iron with high magnetic permeability was attached to both ends of the giant magnetostrictive material (GMM) to reduce loss. Both finite element simulation and experimental analysis were conducted to study the effects of different magnet circuit design schemes on the transducer's performance. The results indicate that attaching pure iron to both ends of the GMM can enhance the working magnetic field, reduce the magnetic flux leakage, and increase the displacement output with reduced current in coil, thus improve the thermal condition of the transducer.
Research Progress of Magnetic Fluids

王晨,胡军,罗伟,严密

DOI: https://doi.org/10.3969/j.issn.1005-8192.2003.04.010

2003-01-01

Abstract:The research progress of magnetic fluids is reviewed.The theory,classification and preparation approaches of magnetic fluids are systematically introduced.On the basis of the above the properties and practical applications are discussed.Particular attention goes to the advantages and drawbacks of preparations and the applications in the fields of industrial sealing and biotechnology.
A Kind of Spatial Angular Magnetic Gear Transmission

yong kui man,jun feng zhang,yi sheng zhang,shuo zhang,wen sheng hao,hua li

DOI: https://doi.org/10.4028/www.scientific.net/AMR.490-495.1873

2012-01-01

Abstract:Gear exciting is of vital importance in modem power transmission systems. But when the requirements of angular gear transmission are needed, the shortcomings of the current mechanical and magnetic gear transmission are even more obvious. The traditional mechanical gear boxes have the construction of direct mechanical contact, whose disadvantages are low efficiency, noisy, apt to lubricate, easy to produce vibrations to be damaged and so on. And the existing magnetic gear is coaxial which can't meet the need of angular transmission. In this paper, the construction of a kind of spatial angular magnetic gear, which has no direct mechanical contact between the driven axis and load axis, is proposed. Besides, the principle of the gear ratio is introduced and a concrete magnetic gear is analyzed. The results show that the range of the angle of this magnetic gear can be very large.
Simulation Analysis of a Novel Magnetic Gear

yong kui man,wen sheng hao,yi sheng zhang,shuo zhang,jun feng zhang,hua li

DOI: https://doi.org/10.4028/www.scientific.net/AMR.490-495.2614

2012-01-01

Abstract:Compared with mechanical gear, permanent magnetic gear has unique advantages which are high efficiency, noise free, zero friction, vibrationless, overload protection, etc. This paper introduced a novel coaxial magnetic gear with high speed radio and analyzed the efficient performance including peak torque, starting, braking, and no-loading procedures on the basis of calculating in finite element software Ansoft. The results prove that the novel magnetic gear is reasonable and efficient.
Optimizing Design of Main Magnetic Devices in an Active Clamped Forword Converter

GAO Jun,ZHOU Wen-qi,MA Hao

DOI: https://doi.org/10.3969/j.issn.1001-4551.2007.11.005

2007-01-01

Abstract:The parameters of main magnetic devices in active clamped forward converter were analyzed,which have an effect on the circuit operation.The design requirements of magnetic inductance in main transformer,the influence of leakage inductance on the efficiency,and the effect of the gap position on AC resistance were presented.Based on analyses of the magnetic field of the core,finite element analysis(FEA) simulation using Ansoft was performed to study the typical winding schemes of transformers and inductors.Experimental results verify what have been analyzed,which are helpful in the design of magnetic devices.
Development and Applications Research on Giant Magnetostrictive Materials

Zhen-xing XUAN,Yi-jie WU,Hui-zhong WANG,Lei ZHANG

DOI: https://doi.org/10.3969/j.issn.1005-2895.2011.01.

2011-01-01

Abstract:To report the current situation of giant magnetostrictive materials(GMM) at home and abroad,the developmental history of GMM is reviewed and its good performance is described.The status quo of application and development of GMM in different engineering fields at home and abroad is presented by the survey systematically.The application and development of GMM in future is discussed.The fields where GMM has a huge potential use are also estimated.
Static simulation research on a new magnetic gear

YongKui Man,Yushuang Zhao,Hua Li,Wensheng Hao,Yuyan Ma

DOI: https://doi.org/10.4156/ijei.vol2.issue3.6

2011-01-01

Abstract:This paper introduces a new magnetic gear, about the structure and simple work principle, the points is the application of static simulation in ANSYS. The paper introduces the flux lines distribution and torque of the magnetic gears at different rotation angles combining with the static simulation diagram, thus explaining the principle of operation intuitively.
The Technology and Engineering Application of Magnetorheological Fluids

丁立强,梅德庆,陈子辰,浦军

DOI: https://doi.org/10.3969/j.issn.1001-4551.2003.05.042

2003-01-01

Abstract:Magnetorheologyical (MR) fluids are regarded as a smart materials that belong to the class of controllable fluids. In this paper, following the introduction of the essential characteristics and work principles of MR fluids briefly, some practical application of MR fluids in engineering are presented in detail, and prospected the development of MR technique in the future at last.
Development and Prospect of Non-contact Permanent Magnetic Gear Transmission

WANG Hu-sheng,HOU Yun-peng,CHENG Shu-kang

DOI: https://doi.org/10.3969/j.issn.1001-6848.2008.02.021

2008-01-01

Abstract:Gear power transmission is the most common way of variable speed transmission,the theory is still not changed many years,shifting the speed and transmitting the energy is accomplished by direct contact teeth,resulting in friction,noise and low efficiency,Whereas non-contact variable speed transmission based on permanent magnetic gear nowadays draw people's attention for reducing such defects.This article summarized the development of permanent magnetic gear.Firstly,introduced the meaning of studying it,and ordinary ways of variable speed transmission.Then the course of its development.Finally,expounded the operating principle and fundamental structure.
Calculation of Electric Vortex Waste of Sleeve on Magnetic Transmission

Zhenhong Du

2008-01-01

Abstract:Electric vortex waste of sleeve on magnetic transmission is analyzed and calculated by means of basic formula of electromagnetics,parameter of magnetic loop design and size of sleeve.The value of theoretically calculation approximate the result of actual test.We can design the magnetic transmission according to them.
Theoretical Analysis and Simulation of Iron Loss for Large Torque Permanent Magnetic Variable Transmission

LI Yong,XIN Yi-jian,XING Jing-wei

DOI: https://doi.org/10.3969/j.issn.1004-7018.2011.01.001

2011-01-01

Abstract:Losses of a new structure Magnetic Variable Transmission(MVT) was studied based on theoretical analysis and simulation.The work provides referencs for its practical application.
Principle and Simulation Analysis of A Novel Structure Magnetic Gear

Li Yong,Xing Jingwei,Peng Kerong,Lu Yongping

2008-01-01

Abstract:Permanent magnetic gear (PMG) is a new kind of non-contact power transmission device which has unique advantages to be applied in the situations of airproof and small vibration requirements. A new kind of large torque permanent magnetic gear box with flexible transmission ratio is introduced in this paper. Research on principle analysis and transmission characteristics were carried out on the basis of calculating in finite element software Ansoft, and test results of a prototype prove that the design is reasonable and good practical in engineering applications.
The Engineering Design of Contactless Emergency Power Supply in Maglev

WANG Lu,CHEN Min,XU De-hong

DOI: https://doi.org/10.3321/j.issn:0258-8013.2007.18.012

2007-01-01

Abstract:The engineering design of contactless emergency power supply is presented in the maglev.The theory of contactless emergency power supply is introduced first,and then the model of contactless power supply system used in the maglev is obtained.From the model,the parameters design of the system can be achieved.To improve the power transmitting capacity of the proposed system,series capacitor compensation is introduced into the proposed system.The principle of the capacitor compensation is analyzed,and then the design of auxiliary linear generator windings is given.Finally the experiment results on the 1:4 prototype are given to verify the analysis before.The experiment results show that the design can effectively improve the performance of the contactless emergency power supply system in the maglev.Then the power rating required of the auxiliary inverter can be reduced obviously.
Design and 2D Finite Element Analysis for a Novel Magnetic Gear Integrated Brushless Permanent Machine

Lifei Zhang,Qingqing Ding

DOI: https://doi.org/10.1109/wcica.2016.7578679

2016-01-01

Abstract:Mechanical gears are used extensively for low-speed electrical machine application to reach high system torque density. However, gear lubrication, vibration and reliability can be significant issues. Magnetic gears (MG) can effectively reduce the speed and amplify system output torque through modulation of ferromagnetic pole-pieces and interaction of magnetic field. This paper proposed a novel magnetic gear integrated brushless permanent machine, which overcomes the drawbacks associated with mechanical gear. Compared with previous magnetic gear integrated machines, the novel one is more space efficient and easier to control for putting the brushless permanent machine inside the magnetic gear through mounting the inner-rotor of MG on the brushless permanent machine. This kind of structure integration can make full use of inside-space of MG, and the novel drive train system can reach higher transmission torque density. The operating principle of the machine is discussed and transient performances are analyzed using 2D finite element method (FEM). Detailed analyses about its gear ratio, torque transmission, core losses, and induced voltage are reported.
Study on Principle and Test for a Novel Structure Permanent Magnetic Gear Based on Magnetic Permeability Modulation

PENG Ke-rong,XING Jing-wei,LI Yong,LU Yong-ping

DOI: https://doi.org/10.3969/j.issn.1004-7018.2011.01.009

2011-01-01

Abstract:Permanent magnetic gear is a kind of non-contact power transmission device,which has a good foreground in the situations exigent to airproof and vibration characteristics.A new kind of high torque PMG based on magnetic permeability modulation principle was introduced in this paper.After the principle analysis,simulation of transmission characteristics was carried out with a model in the finite element software Ansoft,and a prototype was developed for testing.Simulation and test results both prove the correctness of the structure and the feasibility of practical high torque transmission.
Electromagnetic Direct Driving and Near-zero Transmission in Machinery Equipment

谢嘉,赵升吨

DOI: https://doi.org/10.3969/j.issn.1672-0121.2009.05.004

2009-01-01

Abstract:In the text,direct-drive in machinery equipment has been discussed from the field of principle,classification,and the application status.With the improvement of the structure,technology,material,and the controlling function of motor,the electromagnetic direct driving and the near-zero transmission would be the trend in the development of machinery equipment.
Development and Application of Advanced Transmission Systems

王秀丽,宋永华,王海军

DOI: https://doi.org/10.3969/j.issn.1004-9649.2003.08.011

2003-01-01

Abstract:The paper reviews the recent advances in the development and application of transmission systems. Two major types of techniques are covered. The first type is used for long distance transmission, including EHV/UHV AC, HVDC, Compact, and FACTS. In particular, the researchers in China have proposed some special techniques such as Fractional Frequency Transmission System and Four-Phase Transmission System. The second type is used for short distance as in urban areas or output lines of hydro plants, including multi-phase Transmission System, EHV cross linked polyethylene (XLPE) insulated cables, gas insulated lines, and high temperature superconductor lines.
Plenary Talk - Development Of High Field Magnet Technology And Applications

Qiu Liang Wang,Jun Sheng Cheng,Zheng Peng Ni,Ying Ming Dai,Lu Guang Yan

DOI: https://doi.org/10.1109/ASEMD.2013.6780764

2013-01-01

Abstract:Development of science and technology requires high magnetic field strength and good field quality. The pursuit of extremely high magnetic fields is an eternal scientific goal for scientists and engineers. It is an exciting cutting-edge technology full of challenges and has been essential for many significant discoveries in science and technology. Combined with power-electronic devices and related software, a whole magnet system can be built up from various types of scientific instruments and other equipment, and can find widespread applications in scientific research and industry. Magnet technology is currently playing a more and more important role in scientific and technological progress. Ultra-high magnetic fields help to give us much deeper understanding of the world of matter and have special significance for research into the origins of life and disease prevention. In this paper, basic magnet principles, methods of generating magnetic fields, magnetic field applications, and numerical methods for the design of magnet structures are briefly introduced and reviewed.
Development of Magnet Technology and Applications

Qiu Liang Wang,Jun Sheng Cheng,Zhi Peng Ni,Yin Ming Dai,Lu Guang Yan

DOI: https://doi.org/10.1109/asemd.2013.6780827

2013-01-01

Abstract:Ultra-high magnetic fields help to give us much deeper understanding of the world of matter and have special significance for research into the origins of life and disease prevention. In this paper, the magnet technology, magnetic field applications, and numerical methods for the magnet design are introduced and reviewed.
Magnetic Field Calculation and Test for a Non-Contact Electromagnetic Clutch Used at High Speed

LI Yong,XING Jing-wei,HAN Su-fang,LU Yong-ping

DOI: https://doi.org/10.3969/j.issn.1004-7018.2011.03.001

2011-01-01

Abstract:A special clutch is needed in a high speed rotating instrument,which takes charge of coupling and separating two mechanical shifts at high speed.A novel non-contact electromagnetic clutch was designed in this paper,where an electromagnetic coil was used to control input.It has outstanding advantages of non-contact,low noise and automatic overload protection.The clutch was studied with model simulation and magnetic field calculation in Ansoft.A prototype was manufactured and tested.It is proved by experiments that the working principle of the designed clutch is correct and that it has good prospect in practical engineering application.

The Application and Design of Magnetic Transmission

Magnet circuit design and optimization of giant magnetostrictive transducer

Research Progress of Magnetic Fluids

A Kind of Spatial Angular Magnetic Gear Transmission

Simulation Analysis of a Novel Magnetic Gear

Optimizing Design of Main Magnetic Devices in an Active Clamped Forword Converter

Development and Applications Research on Giant Magnetostrictive Materials

Static simulation research on a new magnetic gear

The Technology and Engineering Application of Magnetorheological Fluids

Development and Prospect of Non-contact Permanent Magnetic Gear Transmission

Calculation of Electric Vortex Waste of Sleeve on Magnetic Transmission

Theoretical Analysis and Simulation of Iron Loss for Large Torque Permanent Magnetic Variable Transmission

Principle and Simulation Analysis of A Novel Structure Magnetic Gear

The Engineering Design of Contactless Emergency Power Supply in Maglev

Design and 2D Finite Element Analysis for a Novel Magnetic Gear Integrated Brushless Permanent Machine

Study on Principle and Test for a Novel Structure Permanent Magnetic Gear Based on Magnetic Permeability Modulation

Electromagnetic Direct Driving and Near-zero Transmission in Machinery Equipment

Development and Application of Advanced Transmission Systems

Plenary Talk - Development Of High Field Magnet Technology And Applications

Development of Magnet Technology and Applications

Magnetic Field Calculation and Test for a Non-Contact Electromagnetic Clutch Used at High Speed