Abstract:In order to understand the dependence of photoinduced initial processes on thermal annealing, the femtosecond time-resolved fluorescence dynamics of regioregular poly(3-hexylthiophene) (P3HT) in (thermally) annealed P3HT/[6,6]-phenyl-C61 butyric acid methyl ester (PCBM) blend films has been studied by using the fluorescence up-conversion technique. For comparison, a P3HT solution, pristine P3HT, and unannealed P3HT/PCBM blend films have been investigated as well. The fluorescence dynamics of the P3HT solution showed wavelength dependence. Excitation energy transfer between the segments and torsional relaxation possibly occurred in a time scale of several ps in the solution. Observed rise times at longer wavelength emission suggested the formation of these relatively lower emission states (at 650 and 700 nm). Charge transfer (or excitonic quenching) was the dominant process in the fs time scale with emission at 650 nm in the unannealed blend film. In the annealed blend film, the charge transfer (334 fs) and downhill relaxation (942 fs) of self-trapped (dynamic localized) excitons were competitive processes due to the well aligned nanodomains in the P3HT/PCBM blend films. There were different charge transfer rates at different excited states (650 and 700 nm) in the annealed film. The charge transfer process occurred faster at a lower excited state, and a stronger electronic and vibrational coupling in the annealed P3HT/PCBM films was revealed within these measurements as well. The ultrafast anisotropy decays suggested that a strong and ultrafast reorientation of the molecular dipole moments occurred at excited states. The anisotropy decay was mainly determined by the ultrafast process, whereas the energy could continuously migrate along or between P3HT chains in a time scale of similar to 100 ps. The ultrafast process suggested that there was an excitation delocalization associated with vibrational modes, as was consistent with the observation from steady-state measurements. On the basis of the understanding of the mechanisms above, the optimized cell performance has been established.

Influence of the Various Annealing Treatment Effect on Photoluminescence Spectra of P3HT : PCBM Thin Films

Annealing Of P3ht:Pcbm Blend Film-The Effect On Its Optical Properties

INFLUENCE OF ANNEALING TREATMENT ON P3HT:PCBM ACTIVE LAYER

Study of the effect of annealing process on the performance of P3HT/PCBM photovoltaic devices using scanning-probe microscopy

Femtosecond Time-Resolved Fluorescence Study of P3HT/PCBM Blend Films

Quantitative Nanoscale Monitoring the Effect of Annealing Process on the Morphology and Optical Properties of Poly(3-Hexylthiophene)/[6,6]-phenyl C61-butyric Acid Methyl Ester Thin Film Used in Photovoltaic Devices

Annealing Treatment Effects on the Performances of Solar Cells Based on Different Composition Systems

Nano Structure Evolution in P3ht:Pc61bm Blend Films Due to the Effects of Thermal Annealing or by Adding Solvent

Effect of Thermal Annealing on the Efficiency of Heterojunction Photovoltaic Cells Fabricated Using Poly(3-Hexylthiophene) and Methanofullerene, [6,6]-Phenyl C61-butyric Acid Methyl Ester.

Annealing Treatment Effects on the Performances of Solar Cells Based on Different Solvent Blend Systems

Effects Of Thermal Annealing On Photoluminescence Spectra In Pi-Conjugated Polymer Film: Evidence For Dual Emission By Temperature Dependent Measurements

Effects of Thermal Annealing on the Solvent Additive P3HT PC 61 BM Bulk Heterojunction Solar Cells

Performance improvement of annealing-free P3HT : PCBM-based polymer solar cells via 3-methylthiophene additive

Annealed Treatment Effect in Poly(3-hexylthiophene):Methanofullerene Solar Cells

Dark and illuminated J(V) characteristics of thin layered bulk heterojunction P3HT:PCBM sandwich solar cells after thermal treatment

The Effect of Thermal Treatment on the Morphology and Charge Carrier Dynamics in A Polythiophene-Fullerene Bulk Heterojunction

Effect of thermal annealing in atmosphere on photoluminescence of BTEO-PPV films

Effect of Annealing Pressure on P3ht: Pcbm Nanoscale Morphology and Photovoltaic Properties

Influence of thermal annealing on microstructure, energetic landscape and device performance of P3HT: PCBM-based organic solar cells

The Formation of Crystalline P3HT Fibrils Upon Annealing of a PCBM:P3HT Bulk Heterojunction

Enhancement Mechanisms of the Power Conversion Efficiency for the P3HT:PCBM Bulk Heterojunction Solar Cells with a LiF Cathode Buffer Layer Due to Thermal Annealing