Abstract:Piezoelectric composites, which consist of a piezoelectric material and a polymer, have been extensively studied for the applications of underwater sonar sensors and medical diagnostic ultrasonic transducers. Acoustic sensors utilizing piezoelectric composites can have a high sensitivity and wide bandwidth because of their high piezoelectric coefficient and low acoustic impedance compared to single-phase piezoelectric materials. In this study, a thickness-mode driving hydrophone utilizing a 2-2 piezoelectric single crystal composite was examined. From the theoretical and numerical analysis, material properties that determine the bandwidth and sensitivity of the thickness-mode piezoelectric plate were derived, and the voltage sensitivity of piezoelectric plates with various configurations was compared. It was shown that the 2-2 composite with [011] poled single crystals and epoxy polymers can provide high sensitivity and wide bandwidth when used for hydrophones with a thickness resonance mode. The hydrophone element was designed and fabricated to have a thickness mode at a frequency around 220 kHz by attaching a composite plate of quarter-wavelength thickness to a hard baffle. The fabricated hydrophone demonstrated an open circuit voltage sensitivity of more than -180 dB re 1 V/μPa at the resonance frequency and a -3 dB bandwidth of more than 55 kHz. The theoretical and experimental studies show that the 2-2 single crystal composite can have a high sensitivity and wide bandwidth compared to other configurations of piezoelectric elements when they are used for thickness-mode hydrophones.

A Finite-Element Method For The Analysis Of Piezoelectric Composite Hydrophones

Dynamic Analysis of a Composite Hollow Sphere Composed of Elastic and Piezoelectric Layers

The Fundamental Solutions For Transversely Isotropic Piezoelectricity And Boundary Element Method

Dynamic Behavior of Piezoelectric/Magnetostrictive Composite Hollow Cylinder

Three-Dimensional Semianalytical Solutions For Piezoelectric Laminates Subjected To Underwater Shocks

Piezothermoelasticity and Precision Control of Piezoelectric Systems: Theory and Finite Element Analysis

Finite Element Formulation and Analyses

Piezoelectric composite hydrophone array

Adaptive Lagrange Finite Element Methods for High Precision Vibrations and Piezoelectric Acoustic Wave Computations in SMT Structures and Plates with Nano Interfaces

Analysis of Asymmetric Piezoelectric Composite Beam

Research on the electro‐elastic properties of the 2‐1‐3 (a revised version of 1‐3‐2) piezoelectric composite by finite element method

Piezothermoelastic Characteristics and Control of Active Piezoelectric Structures

Effective Piezoelectric Coefficients of Cement-Based 2–2 Type Piezoelectric Composites Based on a Multiscale Homogenization Model

Precision Placement Analysis of a New Multi-DOF Piezoelectric End-Effector via Finite Elements

Spatially Filtered Multi-Field Responses of Piezothermoelastic Cylindrical Shell Composites

FEM Analysis of Electro-Mechanical Coupling Effect of Piezoelectric Materials

Theoretical and Experimental Studies on Sensitivity and Bandwidth of Thickness-Mode Driving Hydrophone Utilizing A 2-2 Piezoelectric Single Crystal Composite

Derivation of Equivalent Material Coefficients of 2-2 Piezoelectric Single Crystal Composite

Hydrostatic piezoelectric properties of 1-3 type piezo-composite with a porous polymer matrix

Theoretical Analysis of Underwater Sound Absorption of 0-3 Type Piezoelectric Composite Coatings

Research, design, and analysis of a stacked piezoelectric metamaterial structured sensitive element