Abstract:A novel micromechanics-based model in brittle rocks is presented during the confined tensile fracture. This model is formulated by using the stress intensity factor of crack under distinct loading modes in the fracture mechanics theory. The confined tensile fracture mechanisms with and without initial crack friction are established. The development process from the confined tensile fracture without initial crack friction to that with initial crack friction is studied. The stress-strain constitutive relationship describing the transformation mechanism from the unloading of axial stress at a compressive state to the loading of axial stress at a tensile state is also studied during the confined tensile fracture. The tension-compression transformation mechanism codetermined by the friction of the initial crack, the angle of initial crack inclination, and the confining pressure is proven. With the decrease of the angle of initial crack inclination or the increase of the confining pressure, the confined tensile fracture constitutive model tends to be dominated by the tensile fracture mechanism with initial crack friction. The confined tensile fracture of brittle rocks tends to happen at the larger angle of initial crack inclination. The reasonableness of the presented model is checked by contrasting the experimental data. Effects of the friction, density, inclination angle and size of the initial crack, and the confining pressure on the tensile relation curve of strain and stress, the tensile relation curve of crack length and stress, the tensile elastic modulus, the tensile stress of crack initiation, and the tensile strength are discussed.

Constitutive Theory of Interface Behavior in Quasi‐Brittle Materials

Quasi-Micromechanical Constitutive Theory for Brittle Damaged Materials under Tension

Constitutive Modeling of Damageable Brittle and Quasi-Brittle Materials

A simple J-integral governed bilinear constitutive relation for simulating fracture propagation in quasi-brittle material

Cohesive Mohr–Coulomb interface effects on the strength criterion of materials with granular-based microstructure

A Multi-Mechanism Constitutive Model for the Dynamic Failure of Quasi-Brittle Materials. Part II: Integrative Model

Monte Carlo Simulation of Complex 2D Cohesive Fracture in Random Heterogeneous Quasi-Brittle Materials

An elastic-plastic cohesive zone model for metal-ceramic interfaces at finite deformations

Cohesive Dynamics and Brittle Fracture

Quasi-micromechanical damage model for brittle solids with interacting microcracks

A multi-mechanism constitutive model for the dynamic failure of quasi-brittle materials. Part I: Amorphization as a failure mode

SOFTENING/HARDENING CONSTITUTIVE MODEL FOR SOIL-STRUCTURE INTERFACE AND NUMERICAL IMPLEMENTATION

A Constitutive Model Based on the Evolution and Coalescence of Elliptical Micro-Cracks for Quasi-Brittle Materials

A damage mechanics model for quasi brittle materials based on the structured deformation theory

A Multiscale Cohesive Zone Model for Rate-Dependent Fracture of Interfaces

Damage Micromechanics for Constitutive Relations and Failure of Microcracked Quasi-Brittle Materials

A brittle-ductile transition constitutive model based on discrete elastic tensors

An Approximate Scheme for Considering Effects of Microcrack Interaction on the Overall Constitutive Relation of Brittle Solids under Complex Loading

Microscopically based new damage constitutive model with applications*

A Unified Micromechanics-Based Damage Model for Instantaneous and Time-Dependent Behaviors of Brittle Rocks

A Micromechanics-Based Model of Direct Tensile Fracture in Brittle Rocks under Confining Pressure