Abstract:In this experimental and numerical study, we investigate the physical characteristics of a supercavitating flow generated behind a disk-shaped cavitator under both natural and ventilated conditions, an area of research that has not been thoroughly examined. Initially, the experiment is conducted within a cavitation tunnel employing a forward-facing model, complemented by high-speed visualization techniques. Subsequently, an unsteady Reynolds-averaged Navier–Stokes approach is adopted to conduct numerical simulations along with the k–ε turbulent model and Ffowcs Williams–Hawkings (FW–H) methods. The outcomes of the study demonstrate that when considering fixed cavitation numbers, the profiles of natural and ventilated cavities are consistent. Under constant flow conditions, the introduction of ventilating air leads to a discernible reduction in hydroacoustic characteristics in the high-frequency spectrum and has the potential to improve flow stability behind the cavitator. The numerical results offer insight into the behaviors of the water, vapor, and ventilation air. In the foamy cavity stage, all the considered phases (water, vapor, and ventilation air) coexist inside the cavity. Upon the formation of a transparent supercavity, the ventilation air primarily gathers around the ventilation holes and the surrounding gas-leakage region. Meanwhile, the vaporous gas is dominant and is concentrated predominantly in the central region of the supercavity. The findings extracted from this study represent a significant advancement in our understanding of the intricacies of supercavities under ventilated and vaporous conditions. These insights hold the potential to drive groundbreaking innovations in the design and control of supercavitating vehicles.

Experimental Study of Ventilated Supercavities with a Dynamic Pitching Model

Experimental Study on Influence of Ventilation on Trajectory Characteristics of Free Motion of Supercavitating Vehicle

The effect of ventilation on supercavity around a supercavitating vehicle during water-entry

Experimental Study on Morphological Characteristics of Ventilated Supercavity of Double Disc Cavitator Projectile

A numerical simulation of pitching motion of the ventilated supercaviting vehicle around its nose

Experimental Study on the Ventilation Rate of Artificial Supercavitation

Experimental Investigation of Pressure Distribution in Ventilated Supercavity of Underwater Vehicle Model

Numerical Study of the Pitching Motions of Supercavitating Vehicles

Numerical Study of Periodically Forced-Pitching of a Supercavitating Vehicle

Experimental Investigation on the Principle of Inception of Ventilated Supercavitation

Experimental and numerical analysis of the physical characteristics of natural and ventilated supercavitating flows

Modeling and Simulations of Supercavitating Vehicle with Planing Force in the Longitudinal Plane

Experimental Study on Supercavitation Characteristics around Axisymmetric Body with Different Shape Cavitators

Analysis of Motion Characteristics of a Controllable Ventilated Supercavitating Vehicle Under Accelerations

Numerical Simulation on Supercavity Characteristics of Disc Cavitator Based on SST Turbulence Model

Experimental Technology for Investigating Tail Jet Influence on Supercavitation Flow

Experimental investigation on cavity flow pattern of slender bodies

Three-dimensional Ventilated Supercavity on a Maneuvering Trajectory

Experimental Investigation on the Cavity Evolution and Dynamics with Special Emphasis on the Development Stage of Ventilated Partial Cavitating Flow

On the Nonlinear Hydrodynamic Characteristic of a Ventilated Supercavitating Vehicle with High Froude Number

Experimental Study of the Drag Reduction of Ventilated Supercavity of Underwater Bodies