Abstract:Adaptive arrays have been widely used for interference mitigation in Global Navigation Satellite System (GNSS) receivers. Unlike adaptive nulling, adaptive beam-forming generates a dedicated beam in the antenna pattern towards each individual satellite and form nulls in the interference directions at the same time. Thus, the satellite signals are enhanced while interferences are mitigated, resulting in improved signal-to-interference-plus-noise ratio (SINR). In previous literature mainly two categories of beam-forming mechanisms are recommended, namely the array synthesis method and the so-called "blind" beam-forming method. The array synthesis method calculates the steering vector directly, but needs a cumbersome correction procedure dealing with the non-ideal factors of the antenna array and radio frequency (RF) channels. The blind beam-forming method generates the steering vector on-the-fly using carrier phases collected by auxiliary tracking channels, thus avoids the correction procedure, but has a limited performance against interferences. As an alternative, we proposed a different beam-forming method, which can be regarded as a combination of the two above. This method consists of two steps. In the calibration step, a carrier phase look up table (LUT) is obtained using the live-sky signals. In the beam-forming step, the steering vector is generated by looking up the LUT. This method doesn't need a cumbersome non-ideal factor correction procedure, and has a good anti-interference performance, thus can be a third option for beam-forming.In order to implement and validate this method, a software-defined approach is used. Two real-time software receivers, one for the calibration step and one for the beam-forming step are designed and implemented. In order to meet the real-time requirement, a graphics processing unit (GPU) is used as an accelerator. A batched programming technique is used to fully take advantage of the parallelism offered by the GPU. Software design and programming details are introduced. Experiments are conducted in real environment and results are given. It concludes that this method has a good beam-forming performance in improving C/N-0 and getting more precise positioning results.

Extend-beacon Tracking for Deep Space Optical Communication Based on Phase-Correlation

Pointing and tracking errors due to low-frequency deformation in inter-satellite laser communication

Adaptive Tracking for Beam Alignment between Ship-Borne Digital Phased-Array Antenna and LEO Satellite

Airborne Laser Communication System with Automated Tracking

2D Pattern Transfer Based on Multi-Beam Array in Air-Water Channel

Approach of recognition and precision location for the beacon in satellite optical communications

Tracking System for Optical Mobile Communication and the Design Rules

A Novel Beacon Detection Scheme for Free-Space Optical Communications

Weak Beacon Detection for Air-to-ground Optical Wireless Link Establishment

Long Distance Broadband Fiber Optical Beamforming over 120 Km

Realization of FTA with High Tracking Accuracy in FSO

Research and Verification of a Novel Interferometry Method by Joint Processing of Downlink Pseudo-Noise Ranging and DOR Signals for Deep Space Exploration

Performance Evaluation of Direct-Detection Coherent Receiver Array for Free-Space Communications with Full-Link Simulation

A Novel Architecture of Radio Tracking System Based on Photonics

Cross Power Spectral Density Based Beamforming for Underwater Acoustic Communications

Research on the standards of indicators associated with maintain time in bidirectional beam tracking in inter-satellites optical communication links

Beam width and transmitter power adaptive to tracking system performance for free-space optical communication

A Two-Step Beam-Forming Method Based on Carrier Phases for Gnss Adaptive Array Anti-Jamming

A Method for Improving the Detection Accuracy of the Spot Position of the Four-Quadrant Detector in a Free Space Optical Communication System

Guided Open-Loop System for Deep Space Doppler Tracking

Dynamic event-based optical identification and communication