Abstract:2D and 3D numerical simulations with two-fluid approach were conducted to investigate the gas-liquid flow dynamic behaviour in a rectangle bubble column. In the simulations, k-ε and RNG k-ε turbulent models, which account for the influence of the bubbles on liquid phase turbulence, were employed to study the effect of such models on predication of the dynamic behaviour of the bubble plume. In addition, the influence of different interfacial force closures such as drag, lift and added mass forces were also assessed. The simulation results indicated that for the 2D cases, the use of k-ε model could merely yield a steady flow pattern with one big liquid circulation, while the use of RNG k-ε model could produce a steady flow pattern, characterised by the appearance of three large vortices. However, all the 3D simulations have captured the plume meandering behaviour. The results showed that the value of the turbulence eddy viscosity predicted with 3D simulation was one order smaller than that with 2D simulation. Particularly, the meandering period of the bubble plume predicted by RNG k-ε model, was obviously smaller than that predicted using k-ε model in 3D simulations. The former gave the average turbulence eddy viscosity to be almost one third of that predicted by the latter. The assessment of the use of different interfacial force closures and their combinations showed that the lift force has a pronounced effect on the result of bubbly flow behaviour besides the drag force. It was found that the predicted meandering period was much greater than the experimental observations without the inclusion of the lift force, while the predicted period was consistent with the experimental result when the lift force was considered. Our simulations also revealed that the inclusion of the added mass force could notably improve the prediction results.

Numerical simulation of hydrodynamic characteristics in MALR

Experimental and Numerical Simulation on Sequential Three Phase Jet-Loop Reactor

CFD Simulation for Up Flow Jet-Loop Reactors by Use of Bi-Dispersed Bubble Model

Experimental Investigation on Multiscale Hydrodynamics in a Novel Gas–liquid–solid Three Phase Jet‐loop Reactor

Numerical Modelling of Bubbling Flow Dynamic Behaviour in a Bubble Column

LIQUID CIRCULATION RATE AND VOLUMETRIC MASS TRANSFER COEFFICIENT IN MULTI-TUBE AIRLIFT LOOP REACTOR

Computational Fluid Dynamics Simulation of Hydrodynamics in the Riser of an External Loop Airlift Reactor

Local hydrodynamics modeling of a gas-liquid-solid three-phase airlift loop reactor

Hydrodynamic and Mass Transfer of Gas-Liquid-Solid Three-Phase Internal Loop Airlift Reactors with Nanometer Solid Particles

Numerical investigation of gas-liquid flow hydrodynamics in three-dimensional bottom-blown reactor via LES-VOF coupled model

Liquid Circulation Hydrodynamics in an External Loop Airlift Reactor

Numerical Analysis of Two-Phase Flow in Gas-Stirred Reactors

Experimental Study and Cfd Simulation of Hydrodynamic Behaviours in an External Loop Airlift Slurry Reactor

Numerical simulations of a compact inline gas–liquid separator: A comparison between RANS and a hybrid LES-RANS approach

Numerical simulation on the gas-liquid-solid three-phase flow-reaction in FCC riser-reactors III. numerical simulation on the flow, heat transfer and reaction

Numerical Analysis of Gas-Liquid Mixed Transport Process in a Multiphase Rotodynamic Pump

Numerical Simulation of Flow Behavior of Liquid and Particles in Liquid–solid Risers with Multi Scale Interfacial Drag Method

Gas Holdup and Liquid Circulation Velocity in Gas-Liquid Two Stage Internal Loop Airlift Reactor

Investigation of hydrodynamic performance in a staggered multistage internal airlift loop reactor

Research on Numerical Simulation of Combustion Gas Jet under Water

Multiphase flow characteristics of a novel internal-loop airlift reactor