Abstract:On the basis of the study for the heat generation mechanism in unidirectional composites under tensile impact and the interaction between the temperature and the mechanical behaviour of the composite and its constituents, a dynamic Monte Carlo microscopic damage constitutive model taking thermo-mechanics coupling into account is proposed. The foundation of the model is the dynamic Monte Carlo microscopic numerical constitutive damage model for unidirectional composites. The key of the model is to calculate the coupling effect through a statistical average interation method. In this way one can simulate the composite deformation, damage and failure process, and predict its stress/strain curve. The numerical results (stress/strain curves) for unidirectional GRP provide good correlation with experiment results at a strain rate of 300 s−1, based on the bimodal Weibull distribution model of fiber strength. This suggests that the model and the method are rational and effective. Further study shows that the non-linearity of the dynamic stress/strain curve of the composite and its toughness at high strain rates are mainly induced by the cumulative breakage of fibers and its rate and temperature dependence, and thermo-mechanical coupling. Inertia has some effect on the non-linearity of the stress/strain curve and the high-velocity toughness of the composites. The study also shows that the simulations should be carried out on the bimodal Weibull distribution model of the fibers strength. However, there exist a certain deviation between the simulation results and the experiment results when the strain rate is above 800 s−1, and the strain is more than 4%, and further investigation is necessary.

Numerical Modeling of Tensile Behavior of Fiber-Reinforced Polymer Composites

Progressive failure analysis of 2D woven composites at the meso-micro scale

Concurrent Multiscale Modeling of In-Plane Micro-Damage Evaluation in Z-pinned Composite Laminates

A Microscopic Elasto-Plastic Damage Model for Characterizing Transverse Responses of Unidirectional Fiber-Reinforced Polymer Composites

Micromechanical Modeling of Damage Evolution and Mechanical Behaviors of CF/Al Composites under Transverse and Longitudinal Tensile Loadings.

Investigation on the off-axis tensile failure behaviors of 3D woven composites through a coupled numerical-experimental approach

Microscopic Progressive Damage Simulation of Unidirectional Composite Based on the Elastic–plastic Theory

Modeling Tensile Damage and Fracture Behavior of Fiber-Reinforced Ceramic-Matrix Minicomposites

An Innovative Micromechanics-Based Multiscale Damage Model of 3D Woven Composites Incorporating Probabilistic Fiber Strength Distribution

A Microscopic Dynamic Monte Carlo Simulation for Unidirectional Fiber Reinforced Metal Matrix Composites

Micromechanical modeling for longitudinal tensile property of unidirectional CFRP considering dispersion of fiber properties

A Note On The Monte-Carlo Simulation Of The Tensile Deformation And Failure Process Of Unidirectional Composites

A Numerical Method for Simulating the Microscopic Damage Evolution in Composites under Uniaxial Transverse Tension

A continuum damage mechanics model for fatigue degradation and failure of short fiber reinforced composites

Prediction of the Inter-Fiber Mechanical Properties of Composites: Part I Standardization Micro-Scale Modelling Method and Damage Analysis

3D Orthogonal Woven Carbon/Carbon Composites: Micromechanical Modeling and Damage Analysis

An innovative computational framework for the analysis of complex mechanical behaviors of short fiber reinforced polymer composites

A Dynamic Monte Carlo Microscopic Damage Model Incorporating Thermo-Mechanical Coupling in a Unidirectional Composite

Numerical and Experimental Investigation on Mechanical Responses of Plain Woven CFRP Composite under Various Loading Cases

Failure analysis and experimental study on bolted composite joints based on continuum damage mechanics

Modeling and influencing factor analysis for the temperature and damage dependent tensile strength of fiber/polymer composites