Abstract:In a low-temperature environment, the actuation performance of the piezoelectric stack results from the synergic action of the thermo-electro-mechanical field; the actuation performance is influenced by the change in temperature, compressive preload, and excitation voltage. A special and novel instrumentation system is proposed and developed in this study to measure the relationship between the actuation performance of the piezoelectric stack and the change in temperature, preload, and voltage. The bending strain of the cantilever beam driven by the piezoelectric stack reflects its actuation performance, and the corresponding theoretical model is established to optimize the experimental conditions and maximize the strain and signal-to-noise ratio. Based on the experimental results, it can be seen that the actuation performance of the piezoelectric stack increases linearly with the excitation voltage under different temperatures and preload conditions. The static actuation performance increased by 79%-90% when the prestress increased from 0 to 6 MPa, corresponding to a decrease of 15%-30% when the temperature decreased from 20 to -70 °C, and the dynamic actuation performance decreased with an increase in the frequency of the excitation voltage. Consequently, the design methods and ideas are informative to develop an instrumentation system that can measure the influence of thermo-electro-mechanical synergistic effects on the actuation performance of piezoelectric stacks under different temperatures, preloads, and voltages.

INFLUENCE OF TEMPERATURE ON SENSITIVITY OF STRAIN TYPE DISPLACEMENT TRANSDUCER

Measurement of Thermal Expansion at Low Temperatures Using the Strain Gage Method

Study on measurement characteristics of strain type displacement transducer at liquid nitrogen temperature

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

Research on the Feasibility of Eddy Current Displacement Sensor with Temperature Variation for Non-Ferromagnetic Detection Material

High Temperature Eddy Current Displacement Sensor Based on Temperature Drift Compensation

The analysis of the effect on temperature characteristic of pressure transducer

High Temperature Effects on Surface Acoustic Wave Strain Sensor

Experimental Study on Cross-sensitivity of Temperature and Strain of Fiber Optic Bragg Gratings

Thermo-electro-mechanical Synergistic Effect on the Actuation Performance of Piezoelectric Stack

A Novel Temperature-Insensitive Strain Sensor Based on Tapered Fiber Grating

High Resolution Optical Fiber Sensor for Quasi-Static Strain Measurement by Strain-Temperature Discrimination

Design and Test of a New Type Amplifier-based Sensing Device for High Temperature Deformation Monitoring

Discrimination Between Strain And Temperature By Cascading Single-Mode Thin-Core Diameter Fibers

Investigation of Effect of Temperature and Strain Rate on Mechanical Properties of Underfill Material by Use of Microtensile Specimens

Application of high-temperature optical fiber sensor in temperature and strain testing of hot structure

Experimental Investigation on Temperature Dependence of the Performance in a Magnetostrictive Fiber-Optic Interferometric Magnetic Field Sensor

Research on Temperature-Insensitive Micro-Displacement Sensor Cascaded With Spherical Structure

Thermal Expansion and Magnetostriction Measurements at Cryogenic Temperature Using the Strain Gauge Method

High Precision Temperature Insensitive Strain Sensor Based on Fiber-Optic Delay