Abstract:The maximum sensitivity function as the conventional robustness index is often used to test the robustness and cannot be used to tune the controller parameters directly. To reduce analytical difficulties in dealing with the maximum sensitivity function and improve the control performance of the proportional-integral-derivative controller, the relative delay margin as a good alternative is proposed to offer a simple robust analysis for the proportional-integral-derivative controller and the first-order plus dead-time systems. The relationship between the parameters of the proportional-integral-derivative controller and the new pair, e.g., the phase margin and the corresponding gain crossover frequency, is derived. Based on this work, the stability regions of the proportional-integral-derivative controller parameters, the proportional gain and the integral gain with a given derivative gain, are obtained in a simple way. The tuning of the proportional-integral-derivative controller with constraints on the relative delay margin is simplified into an optimal disturbance rejection problem and the tuning procedure is summarized. For convenience, the recommended parameters are also offered. Simulation results demonstrate that the proposed methodology has better tracking and disturbance rejection performance than other comparative design methodologies of the proportional-integral/proportional-integral-derivative controller. For example, the integrated absolute errors of the proposed proportional-integral-derivative controller for the tracking performance and disturbance rejection performance are less than 91.3% and 91.7% of the integrated absolute errors of other comparative controllers in Example 3, respectively. The proposed methodology shows great potential in industrial applications. Besides, the proposed method can be applied to the design of the proportional-integral-derivative controller with filtered derivative which is recommended for practical applications to weaken the adverse influence of the high-frequency measurement noise.

Genuine Feasible Stability Margin Region for Integrating Unstable Processes with PD Control

Stabilization Subspaces Based DPGA for Optimizing PID Controllers

A Developed Method of Tuning PID Controllers with Fuzzy Rules for Integrating Processes.

Classical Stability Margins by PID Control

Robust PID Tuning Using Closed-Loop Identification

PID CONTROL FOR INTEGRATOR AND DEAD TIME PROCESS

Maximization of Gain/Phase Margins by PID Control

Advanced Pid Tuning for Unstable Processes Based on A New Robustness Specification

PID controller based on gain margin and phase margin

Disturbance Observer based Control of Integrating Processes with Dead-Time using PD controller

An analytical method for PID controller tuning with specified gain and phase margins for integral plus time delay processes

Optimal Tuning Method of PID Controller Based on Gain Margin and Phase Margin

Optimal PI–PD Controller Design for Pure Integrating Processes with Time Delay

Robust PI-PD Controller Design: Industrial Simulation Case Studies and a Real-Time Application

Design And Tuning Method Of Pid Controller For A Class Of Inverse Response Processes

PID Design of Unstable Process by Using Closed Loop Constraints

New PI-PD Controller Design Strategy for Industrial Unstable and Integrating Processes with Dead Time and Inverse Response

A new PID controller design with constraints on relative delay margin for first-order plus dead- time systems

A Robust Pid Tuning Method For Unstable Foptd Process

Graphical Tuning of PD~μ Controllers for Fractional-Order Time-Delay Systems

An Approach for Setting Parameters for Two-Degree-of-Freedom PID Controllers.