Abstract:Dynamic characterization of textile composites is confronted with great challenges due to its large unit-cell size and the inherent limitations in specimen size for the Hopkinson bar-based test system. The small specimen size will inevitably introduce variations in effective mechanical response and failure mechanism, and bring about additional problems in determining the realistic dynamic properties of the material. This work experimentally investigated the dynamic compression behavior of three-dimensional angle interlock woven composite (3DWC) using the split Hopkinson pressure bar (SHPB). Specimens with different sizes were designed to explore the size dependency, strain-rate dependency and orientation dependency for the compressive behavior of the 3DWC. A high-speed camera and an optical microscope were introduced to elaborate on the damage progressing process and fracture morphology under diff0erent loading conditions. With an increase in strain rate, the measured strength of warp-direction specimens increased by approximately 7%, 6%, and 2.4% for three different sizes of specimens, accompanied by more severe intra-tow damage. Different-sized dynamic specimens exhibited comparable failure processes but modest variations in measured properties. When the number of unit cells in a specimen increased from two to three and four, the strength was observed to rise by around 21% and 26.3% respectively. In comparison to the warp-direction specimen, the weft-direction specimens exhibited substantially higher strength and failure strain, as well as distinct dominant failure modes of yarns. This work provides valuable insights into the determination of dynamic properties for 3D woven composites, and the designing and interpretation of dynamic test methods.

Dynamic Behavior of Woven Composite Beams under HPB Impact Loading

Dynamic Behavior of CFRP-Strengthened Reinforced Concrete Beams Without Stirrups under Impact Loading

Impact Testing of Reinforced Concrete Beams Shear-Strengthened with Fiber-Reinforced Polymer Wraps

X-ray microtomography analysis of the damage mechanisms in 3D circular braided carbon fiber/epoxy resin composite tubes under axial impact compression

Experimental and numerical investigations on the dynamic response of woven carbon fiber reinforced thick composite laminates under low-velocity impact

Mechanical Behavior and Failure Mode of Woven Carbon/epoxy Laminate Composites under Dynamic Compressive Loading

Dynamic response and damage mechanisms of 2D plain weave hybrid composites under the out-of-plane punch shear loading

Dynamic Compression Failure Mechanisms and Dynamic Effects of Integrated Woven Sandwich Composites

Low-velocity impact response of 3D woven hybrid epoxy composites with carbon and heterocyclic aramid fibres

Compressive Failure of Carbon/Epoxy Laminate Composites under High Impact Loading

Size-dependent mechanical behaviors of 3D woven composite under high strain-rate compression loads

Experimental characterization of failure behaviour for three-dimensional woven carbon/carbon composites under pin-loading

Research on the Impact Damage and Fracture Behaver of Braided Composites

Impact Response of Carbon/Kevlar Hybrid 3D Woven Composite under High Velocity Impact: Experimental and Numerical Study

Flexural progressive damage and failure behavior of carbon-aramid/epoxy hybrid woven composites

Experimental Study on the Mechanical Behavior and Failure Mechanism of 3d MWK Carbon/epoxy Composites under Quasi-Static Loading

Mechanical Characterization and Impact Damage Assessment of Hybrid Three-Dimensional Five-Directional Composites

Dynamic Compressive Response and Failure Behaviour of CFRP Composites at High Strain Rates

Experimental Characterization for Failure Behavior of Woven Modified Carbon/Carbon Composites Under Pin-Loading

Low-velocity impact damage research on 2-dimentional UHMWPE/CF hybrid woven laminates under preloading

Research on dynamic mechanical behavior and damage evolution mechanism of Cu/WCp laminated composites