Influence of Ambient Temperature on Positional Deviation of Linear Axis of CNC Machine Tool
Junxu Ma,Changxing Zhou,Jun Zhang,Wanhua Zhao
DOI: https://doi.org/10.11784/tdxbz201605056
2017-01-01
Abstract:When the machine tool is in work,ambient temperature change will cause the positioning accuracy after compensation to get worse.In this paper,a semi-closed loop linear motion axis position deviation prediction model was proposed according to thermal error linear law under ball screw fixing-support installation.Under semi-closed loop control system,position deviations of the whole stroke in two environments of the highest and lowest tempera-ture were tested.The law of thermal error changing with ambient temperature was obtained by data fitting.By use of the position deviation prediction results,the pitch error was further compensated for.The results show that for semi-closed loop CNC machine tool,when the ambient temperature rises by 8,℃,the maximum of position deviation increases from 8,μm to 72,μm,while it decreases to 9.9,μm after compensation and the decreasing rate is 96.87%,;for closed-loop CNC machine tool,when the ambient temperature rises by 8,℃,the maximum of position deviation increases from 2.5,μm to 17.7,μm.When the proposed model is adopted to compensate for pitch error,the thermal stability of positioning accuracy can be improved,and when the ambient temperature rise is higher than 6,℃,the positioning accuracy with pitch error compensation under semi-closed loop control system is higher than that under closed loop control system.