Abstract:Supersonic flows exhibit compressible effects and ignoring this influence would lead deviations in supersonic combustion simulation. In this study, taking the standard k -e turbulence model as an example, both the expansion and structural compressibility corrections were conducted under the open-source numerical simulation platform OpenFOAM. These corrections are employed to suppress excessive turbulence kinetic energy growth in supersonic flow. The modified turbulence model was validated against complicated flow problems such as supersonic cavity flow, strut injection combustion, and supersonic boundary layer combustion. The results demonstrated that the modified k - e turbulence model could accurately capture the compressible variations of the flow field for the four classical cases. Compared to the standard k -e turbulence model, the computational accuracy through the modified model was improved and could effectively simulate the development of the supersonic combustion. For the supersonic cavity flow, using this modified model could accurately predict flow separation. In the simulation of DLR scramjet engine, using the modified turbulence model could suppress downstream supersonic combustion processes and the predictions was in good agreement with experimental data. For the simulation results of boundary layer combustion, this modified turbulence model could accurately capture the development boundary layer combustion and its ignition position. Therefore, it could be concluded that the established solver named Ck-EpsilonFOAM in this study was capable of effectively predicting the development of supersonic combustion flows within confined spaces and near-wall flow separation phenomena for scramjet engine. So it can be applied to numerical simulations of supersonic turbulent combustion.

A K- Ɛ Turbulence Model Considering Compressibility in Three-Dimensional Transonic Turbulent Flow Calculation

Application of simplified threeGequation transition model in hypersonic flow

Influence of Turbulence Models on Simulation of a Compressor

A modified k-ε turbulence model for compressible flow application

A new k-ε turbulence model with compressibility modifications

The Turbulence Models for Numerical Analysis of Liquid Kerosene Supersonic Combustion

Applying Robinson's New Two-Equation Turbulence k-(?) Model to Numerically Simulating Turbulent Flow

Application of Turbulence Models in Simulation of Complex Flow-Fields

Numerical Simulation for Transonic Flows at High Incidence Around a Complete Fighter with Two-Equation K-G Model

Accurate simulations of three-dimensional turbulent flows in turbine cascade with a high resolution upwind scheme

Computation of Hypersonic Turbulent and Transitional Flows Using an Extended Gas Kinetic Scheme

Mean Flow Compressibility Effects in Transonic Turbulence Modeling

Influence of the turbulence model on the numerical predictions of cold turbulent flow in a heavy-duty gas turbine DLN combustor

Assessment of a Novel K–ω Turbulence Model for Transonic Centrifugal Impeller Simulations

A New Compressibility Modification K -Ε Turbulence Model with Shock Unsteadiness Effect

Computations with K-G Model for Complex Configurations at High-Incidence

Numerical Simulation of Scramjet Cold Field Applying Three Turbulence Models

A K -Ɛ-pdf Two-Phase Turbulence Model for Simulating Sudden-Expansion Particle-Laden Flows

Numerical Simulation of Scramjet Engine with Compressibility Corrections on K-Εmodel Based on OpenFOAM

Compressible Correction for Separated and Shear Flow Based on Structural Compressibility

A Turbulence Characteristic Length Scale for Compressible Flows