Abstract:Fixture design is one of the main factors which affect the final product quality. Proper design of fixture plays an important role in ensuring the required tolerance of the product. Proper placement of locators is one of the prominent factors in fixture design. Locators are elastic: they deform under clamping and machining forces causing rigid body displacement of the workpiece which in turn affects the part quality. In this article, a 3-2-1 type of fixturing system having elastic locators around a considerably rigid rectangular workpiece is considered. A genetic algorithm is proposed, which uses a fitness function that evaluates the positioning error of the workpiece under external forces and torque. Among several variables, 12 variables, which define the placement of locators, are chosen to be optimized while minimizing the positioning error of the workpiece at the point of action of machining force. The proposed algorithm optimizes the 12 interlinked variables, within the specified region, for machining force and torque at a single point. However, when the cutting tool moves to any other point on the workpiece, it is observed that either the workpiece loses its contact with any one of the locators or the positioning error increases by a large value. To overcome this issue, the proposed algorithm is further modified for placement optimization to cater for multi-point machining, and the isostatism of the workpiece is ensured by checking the magnitude and direction of displacement (of what?) at each point of workpiece-locator contact. Finally, the original and modified GA algorithms are explained through a case study where the single point optimized placement shows loss of contact when machining force is applied at other points. The placement optimized from the modified algorithm shows that the isostatism of the workpiece remains intact while all four positioning errors are converged towards the same value. The results obtained from the proposed and modified algorithm are verified using ANSYS simulation.

Optimal Design of Measurement Point Layout for Workpiece Localization

Optimal placement of measurement points on large aircraft fuselage panels in digital assembly

Uncertainty Evaluation and Optimization of INS Installation Measurement Using Monte Carlo Method

A Method for Robot Placement Optimization Based on Two-Dimensional Manifold in Joint Space.

Approaching Optimum Sampling by Sectional Error Equivalence

Particle swarm algorithm-based identification method of optimal measurement area of coordinate measuring machine

A Multi-Objective Optimization and Decision Algorithm for Locator Layout Continuous Searching in Checking Fixture Design

Configuration optimization of laser tracker stations for position measurement in error identification of heavy-duty machine tools

An Iterative Minimum Zone Algorithm for Assessing Cylindricity Deviation

Geometric Analysis of Measurement Errors in a Surface Metrology Class with Closed-Loop Probes

Automatic approach of workpiece locating scheme in checking fixture design

Locator Layout Optimization for Checking Fixture Design of Thin-Walled Parts

Error Analysis of Normal Surface Measurements Based on Multiple Laser Displacement Sensors

Locator Placement Optimization for Minimum Part Positioning Error During Machining Operation Using Genetic Algorithm

Optimization Design for Normal Direction Measurement in Robotic Drilling

Free-form surface parts quality inspection optimization with a novel sampling method

Optimized Design and Characterization of a Non-Linear 3D Misalignment Measurement System

A Combined Measurement Method for Large-Size Aerospace Components

Measurement point sampling method for inspection of parts with free-form surfaces

Online approach to measuring relative location of spatial geometric features of long rotating parts

Geometric error identification for three-axis machine tools based on on-machine measurement of a calibrated artefact