Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The accuracy of machining can be predicted during the design process of CNC machine tools, while the prediction accuracy depends on the prediction model. However, when establishing the prediction model, the coupling effect among the machine tool's different components is always ignored for modeling efficiency, so this will lead to its reliability cannot be guaranteed. To address this problem, the model reduction theory and the lumped parameter method are used in this study to set the state-space equations of the essential structural parts. Moreover, the electro-mechanical coupling parameter equation of the servo system is transformed into a state-space equation. Then the state-space equations of the components and the servo system are coupled to establish the machine tool dynamic model. Furthermore, a theoretical model of instantaneous undeformed chip thickness is found, and according to the linear relationship between the micro-cutting force and the instantaneous undeformed chip thickness, the instantaneous cutting force model of the cylindrical milling cutter is established. Based on these, the integrated model, which considers the mechanical structure, control system and cutting force, is obtained and further used in Simulink to build the machining accuracy prediction platform, as well as the accuracy of the integrated prediction model is verified. Moreover, the prediction model established by the integrated modeling method can effectively simulate the actual machining conditions of the machine tool, and the superiority of prediction is confirmed by comparing the simulated and measured results in peripheral milling applications. The results show the error in the system response efficiency is 14.8%, while the error in position accuracy and delay characteristics is less than 10%, the error between the predicted size of the prediction model and the actual size is within 28 μm, a minimum prediction error is 7 μm.

A Physical Machining Accuracy Predicting Model in Turning

A New Mathematical Method of Modeling Parts in Virtual CNC Lathing and Its Application on Accurate Tool Path Generation

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

An Error Prediction Model of NC Machining Process Considering Multiple Error Sources

Model for Surface Topography Prediction in Cylinder Turning

Study on Precision Modeling and Prediction of Five-axis NC Machine Tool

A method of sensitivity analysis and precision prediction for geometric errors of five-axis machine tools based on multi-body system theory

An Integrated Model Based Prediction of Machining Accuracy for Milling Machine

Surface Roughness Prediction Based on Cutting Parameters and Nose Radius in Precision Turning

Machining Accuracy Prediction Systems for CNC Machine Tools Based on Multi-body System Theory

Modeling of Virtual Workpiece with Machining Errors Representation in Turning

A Novel Model for Predicting Machining Error in Peripheral Milling Process

Surface roughness prediction for turning based on the corrected subsection theoretical model

Prediction and Compensation of Machining Errors for Turning of Slender Shafts

Research on Life of Machine Accuracy and Precision Reliability Assessment Concerning about a Turn-Milling Combined Machine Tool

Research on Deformation Prediction and Error Compensation in Precision Turning of Micro-Shafts

An Optimized Algorithm and the Verification Methods for Improving the Volumetric Error Modeling Accuracy of Precision Machine Tools

Prediction of machining accuracy based on geometric error estimation of tool rotation profile in five-axis multi-layer flank milling process

Modeling of Kinematics Errors and Alignment Method of a Swing Arm Ultra-Precision Diamond Turning Machine

Precision design for machine tool based on error prediction

Mechanism analysis and accuracy prediction for kinematic errors of machine tool