Cumulative Error Calibration of Fluxgate Sensor Considering Temperature Effects
Ruiping Yang,Hongpeng Wang,Wang Luo,Huan Liu,Jian Ge,Daisuke Chugo,Haobin Dong
DOI: https://doi.org/10.1109/tim.2024.3463000
IF: 5.6
2024-10-04
IEEE Transactions on Instrumentation and Measurement
Abstract:The three-axis fluxgate sensor is the most widely used sensor in vector magnetic measurement. This article proposes a calibration method for the cumulative error of the three-axis fluxgate sensor considering the influence of temperature. First, various errors of the three-axis fluxgate sensor were analyzed, and the cumulative error model was established. The parameters of the sensor cumulative error model were calculated based on the particle swarm optimization-genetic algorithm (PSO-GA) optimization algorithm. Then, the water bath heating method was used to implement scalar comparison experiments between the three-axis fluxgate sensor and a reference Overhauser magnetometer at different temperatures. Experimental results show that temperature affects the scale factor coefficients in the error calibration parameters of the three-axis fluxgate sensor, and the scale factor coefficients , , and of the three axes have similar trends with temperature. Finally, we designed validation experiments for the proposed calibration method. During long-term magnetic field measurement, using the fixed scale factor coefficient matrix for calibration still has a large deviation from the trend of the reference field, with the maximum deviation being about 150 nT. However, using the scale factor coefficient matrix that changes with temperature for calibration, the trend of the calibrated magnetic field is basically consistent with the reference field, and the maximum deviation is less than 20 nT. This means that the proposed method has a better calibration effect.
engineering, electrical & electronic,instruments & instrumentation