Abstract:Current understanding of insulators abnormal ablation caused by alumina deposition in solid rocket motors (SRMs) is limited. The ability to calculate its thermochemical kinetic parameters and establish the corresponding ablation model determines the height of the thermal protection system design for advanced SRMs. In this work, the reaction mechanism of interaction between alpha-alumina and porous charred layer under deposition conditions was proposed firstly. Then the isothermal thermogravimetric experiments at 1750-1900 degrees C were carried out for the reaction system. The TG and DTG curves under various reaction conditions were treated by isoconversional method and model-fitting method, respectively, and the corresponding kinetic parameters and reaction models were calculated. Finally, based on the above research results, a deposition ablation model was established and the corresponding calculation code was compiled. Results show that the reaction of alpha-alumina/ porous charred layer system is formed by the superposition of four steps. The reaction model and kinetic parameters of each step reaction are as follows: steps 1 and 4 follows the diffusion control model (D3) with activation energies E a of 109.6 kJ center dot mol -1 , 47.9 kJ center dot mol -1 and frequency factors A of 47.9 min -1 , 0.4 min -1 , respectively, step 2 follows the chemical reaction control model (F1) with E a of 48.5kJ center dot mol -1 and A of 14.8 min -1 , and step 3 follows the contracting area model (R2) with E a of 41.9kJ center dot mol -1 and A of 3.9 min -1 . The insulator's ablation thickness calculated by the deposition ablation model established in this paper has an error of 16.01% compared to that in the experiment, indicating that it can be used to accurately calculate the ablation characteristics of insulators under the alumina deposition conditions in the future work. (c) 2022 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Influences of Phase Transition and Carbon Soot Impurity on the Radiative Properties of Alumina Particles Flow

The Influence of Temperature Distribution on Multiphase Alumina Particle's Radiative Properties

Radiative Properties of Radially Nonisothermal Alumina Particles with Multiphase

Influences of Aluminum Oxide Content and Particle Size on Flow Parameter Distribution of Solid Rocket Motor Exhaust Plume

Radiative properties of high temperature particles in their phase transitions and inverse radiation problem of particles

Infrared Radiative Properties of Alumina Up to the Melting Point: A First-Principles Study

In-depth Study on Reaction Kinetics of Porous Charred Layer with High Temperature Alumina Deposition in Solid Rocket Motor

Effect of residual carbon on the phase transformation and microstructure evolution of alumina-mullite fibers prepared by sol-gel method

Numerical prediction of the two-phase flow and radiation effects on the thermal environment and ablation of solid rocket nozzle

Analysis on Influences of Micro-Scale Ligament Morphology and Pore-Level Structure Parameter on Spectral Properties of Alumina Foam

Investigation of Phase and Microstructural Transformations in Different Alumina-Silica Fibers at Varied Heat Treatment Temperatures: Exploring the Mechanism of Silica's Influence

Phase Field Investigation on the Alumina Nanocrystalline Growth Controlled by Mullite-Alumina Phase Transition in Alumina-Mullite Fibers

Scattering and Absorption Coefficients of Silica-Doped Alumina Aerogels

Radiative properties of alumina/aluminum particles and influence on radiative heat transfer in solid rocket motor

Influence of Carbon on Phase Transformation of Oxides in Carbon/Oxide Composites

In-situ investigation of microstructural evolution of γ-AlOOH to Al 2 O 3 using electron atomic pair distribution function (ePDF)

Experimental Characterization of Al2O3 Foam Based on High Temperature Thermal Response Experiments

Numerical investigations of the coupled conductive-radiative heat transfer in alumina ceramics

On the Radiative, Diffusion and Chemical Effects of Soot Formation in a Nonsmoking Laminar Ethylene Diffusion Flame

Sensitivity of Flame Structure and Flame Speed in Numerical Simulations of Laminar Aluminum Dust Counterflow Flames

Investigation of Thermal Radiation from Soot Particles and Gases in Oxy-Combustion Counter-Flow Flames