Abstract:Carbon nanotube/continuous carbon fiber reinforced poly(ethylene terephthalate) (CNT/CCF/PET) composites are prepared by melt impregnating. The effects of CF and CNT content on the mechanical properties, melt and crystallization behaviors, and submicroscopic morphology of CNT/CCF/PET composites are studied. The tensile test results show that the increase of CF and the addition of appropriate amount of CNT improved the tensile strength and tensile modulus of the composites. When the content of CNT is 1.0 wt% and the content of CF is 56 wt%, the properties of the composites are the best, with tensile strength of 1728.7 MPa and tensile modulus of 25.1 GPa, which is much higher than that of traditional resin matrix composites. The results of dynamic mechanical analysis (DMA) show that the storage modulus of the composites increased with the increase of CF and CNT content. In particular, the addition of CNT greatly reduced the loss modulus of the composites. Morphological analysis show that the addition of CNT improved the fiber–matrix interface of the composite, which changes from fiber pull-out and fracture failure to fiber matrix fracture failure, and the fiber matrix interface is firmly bonded. In addition, there are polymer coated CNT protrusions on the surface of the fiber was observed. The results of differential scanning calorimetry (DSC) show that the melting temperature and crystallization temperature of the composites increased with the increase of CF content. The addition of CNT had little effect on the melting temperature of the composites, but it further improved the crystallization temperature of the composites. The effect of CNT content on the crystallization kinetics of the composites is studied. The non-isothermal crystallization kinetics of the composites is described by Jeziorny's improved Avrami equation. The results show that CNT has a great influence on the crystallization type of the composites. As a nucleating agent, CNT has obvious heterogeneous nucleation effect in the composites, which improves the crystallization rate of PET.

Crystallization behavior of poly(trimethylene terephthalate)-poly(ethylene glycol) segmented copolyesters/multi-walled carbon nanotube nanocomposites

Effects of MXene on Nonisothermal Crystallization Kinetics of Isotactic Polypropylene.

Crystallization and Dielectric Behavior of Polypropylene/Carbon Nanotubes Composites

Crystallization, Morphology, and Dynamic Mechanical Properties of Poly(trimethylene Terephthalate)/clay Nanocomposites

PE/PE‐g‐MAH/Org‐MMT Nanocomposites. II. Nonisothermal Crystallization Kinetics

Non-isothermal Crystallization Properties of Polypropylene Composites Filled with Multi-Walled Carbon Nanotubes

Synthesis and Characterization of Thermotropic Liquid Crystalline Polyester/multi-Walled Carbon Nanotube Nanocomposites

Molecular Dynamics Simulation on the Crystallization Behavior of Cyclic Polyethylene Affected by Functionalized Carbon Nanotubes

Effects Of Beta-Nucleating Agent And Crystallization Conditions On The Crystallization Behavior And Polymorphic Composition Of Isotactic Polypropylene/Multi-Walled Carbon Nanotubes Composites

Two-stage Crystallization Kinetics Equation and Nonisothermal Crystallization Analyses for PTEG and Filled PTEG

Mechanical Properties, Melting and Crystallization Behaviors, and Morphology of Carbon Nanotubes/Continuous Carbon Fiber Reinforced Polyethylene Terephthalate Composites

New insight into the crystallization behavior of poly(ethylene terephthalate)/clay nanocomposites

Ultrahigh Molecular mass Polyethylene/ Carbon Nanotube CompositesCrystallization and melting properties

Isothermal Crystallization Kinetics of Polypropylene with Silane Functionalized Multi‐walled Carbon Nanotubes

Nonisothermal Crystallization Kinetics and Thermomechanical Properties of Multiwalled Carbon Nanotube‐reinforced Poly(ε‐caprolactone) Composites

Isothermal Crystallization and Subsequent Melting Behavior of Poly(Ethylene Terephthalate)/Silica Nanocomposites

Nonisothermal Crystallization Kinetics of Poly(butylene Terephthalate)/multiwalled Carbon Nanotubes Nanocomposites Prepared by in Situ Polymerization

Crystallization Behavior of Poly(vinylidene Fluoride) Nanocomposites Containing Multiwalled Carbon Nanotubes

Functionalized multi-walled carbon nanotubes improve nonisothermal crystallization of poly(ethylene terephthalate)

From Α- to Β-Crystallization in Multi-Walled Carbon Nanotubes-Filled Polypropylene Nanocomposites