Abstract:Purpose Crystallization kinetics is a key factor that controls the crystallization process of polymers and influences the crystallinity and morphology of polymers. This study aims to explore the effects of functional filler SiO 2 aerogel and co-modified filler organic montmorillonite (OMMT) on the crystallization process of polyester polyethylene terephthalate (PET). In this study, the nonisothermal crystallization kinetics of OMMT/SiO 2 aerogel/PET composites were studied by Jeziorny method. Design/methodology/approach The catalyst (Sb 2 O 3 ), OMMT and SiO 2 aerogel were uniformly dispersed in ethylene glycol (EG). Then, the mixture and terephthalic acid (PTA) were put into a semicontinuous polyester synthesis reactor, and the SiO 2 aerogel/PET composites were prepared by esterification and polycondensation. Findings Non-isothermal kinetic results showed that the high cooling rate hindered the movement of the molecular chain of the composites and made the crystallization peak move toward the low-temperature direction. With the increase of crystallization temperature (T c ), the melt crystallization rate decreases, but the cold crystallization rate increases. The introduction of OMMT and SiO 2 aerogel condensation affected the nucleation and growth mode of crystals, lengthened the time with a relative crystallinity of 50% (t 1/2 ) and decreased the crystallization rate. OMMT improved the crystallinity and Avrami index of the composites. Research limitations/implications Effects of thermal insulation functional filler SiO 2 aerogel and co-modified filler OMMT on the crystallization process of PET were studied by non-isothermal crystallization kinetics, and the effects of SiO 2 aerogel and OMMT on the nucleation mechanism of PET were clarified, which provided a theoretical reference for the preparation and performance optimization of PET matrix composites. Originality/value In this study, the OMMT/SiO 2 aerogel/PET composites were prepared by in-situ polymerization, the crystallinity of PET matrix composites was improved, and the effects of OMMT and SiO 2 aerogel on the crystallization process of PET were clarified.

Functionalized multi-walled carbon nanotubes improve nonisothermal crystallization of poly(ethylene terephthalate)

Liquid Crystalline Pet/60hba-Mwnts Composite: Synthesis, Characterization, and Properties

Plasma Treatment‐induced Fluorine‐functionalized Multi‐walled Carbon Nanotubes to Modify Poly(ethylene Terephthalate) Obtained Via in Situ Polymerization

Morphology, Crystallization, and Mechanical Properties of Poly(ethylene Terephthalate)/multiwall Carbon Nanotube Nanocomposites Via in Situ Polymerization with Very Low Content of Multiwall Carbon Nanotubes

Effects Of Beta-Nucleating Agent And Crystallization Conditions On The Crystallization Behavior And Polymorphic Composition Of Isotactic Polypropylene/Multi-Walled Carbon Nanotubes Composites

Mechanical Properties, Melting and Crystallization Behaviors, and Morphology of Carbon Nanotubes/Continuous Carbon Fiber Reinforced Polyethylene Terephthalate Composites

Effect of multi-walled carbon nanotubes on the physical properties and crystallisation of recycled PET/TPU composites

Enhanced Crystallization Behaviors of Poly(ethylene Terephthalate) Via Adding Expanded Graphite and Poly(ethylene Glycol)

Non-isothermal Crystallization Kinetics of Poly (ethylene Terephthalate)/Grafted Carbon Black Composite

Crystallization Behavior of Biodegradable Poly(l‐lactide)/multiwalled Carbon Nanotubes Nanocomposites from the Amorphous State

Non-isothermal Crystallization Properties of Polypropylene Composites Filled with Multi-Walled Carbon Nanotubes

Isothermal Crystallization and Subsequent Melting Behavior of Poly(Ethylene Terephthalate)/Silica Nanocomposites

Crystallization and Rheological Behaviors of Amino-Functionalized Multiwalled Carbon Nanotubes Filled Polyamide 6 Composites

Enhanced crystallization and properties of poly(ethylene terephthalate) nanocomposites with zeolites from 3D to 2D topologies

Synthesis of Polyethylene Terephthalate (PET) with High Crystallization and Mechanical Properties via Functionalized Graphene Oxide as Nucleation Agent

Influence of Nucleation Agents on the Crystallization Behavior of PET

Non-isothermal crystallization kinetics of organic montmorillonite/SiO 2 aerogel/PET composites

Nonisothermal Crystallization Kinetics of Poly(butylene Terephthalate)/multiwalled Carbon Nanotubes Nanocomposites Prepared by in Situ Polymerization

Study on non‐isothermal crystallization kinetics of Poly (butylene terephthalate)/Poly (ethylene terephthalateco‐1,4‐cylclohexylenedimethylene terephthalate) blends

Effect of calcium carbonate on PET physical properties and thermal stability

Non-Isothermal Crystallization Behavior of Β-Nucleated Isotactic Polypropylene/Multi-Walled Carbon Nanotube Composites with Different Melt Structures