Development Status and Research Trends of Slow/Controlled Release Fertilizer

王恩飞,崔智多,何璐,肖传绪,莫海涛,张小勇

DOI: https://doi.org/10.3969/j.issn.0517-6611.2011.21.045

2011-01-01

Abstract:Slow/controlled release fertilizer was classified by the means of the nutrient release.The representative products were introduced.The current research situation in China were summarized.And the research trends were discussed.

What problem does this paper attempt to address?

Development in Polymer Latex Coated Fertilizer for Controlled Release

LIU Yonghui,WANG Tingjie,KAN Chengyou,WANG Minghao,JIN Yong

DOI: https://doi.org/10.3321/j.issn:1000-6613.2009.09.020

2009-01-01

Abstract:The research and development in polymer latex as coating material for controlled fertilizer release are reviewed.The characteristics of coating processes in a fluidized bed coater and drum fluidized bed coater are analyzed.The controlled release performance of latex coated fertilizers is evaluated.The key points in the research and development and the prospects of polymer latex coated fertilizer are analyzed.
Discussions on development of new type fertilizer in China

ZHAO Bing-qiang,YANG Xiang-dong,LI Yan-ting,LIN Zhi-an,YUAN liang

2012-01-01

Abstract:The conception and contents of new fertilizer are defined.The quality-oriented instead of quantity-oriented development strategies of fertilizer in China is reiterated.The main existed problems,technology innovation and future development trend of slow-release fertilizer,value-added urea,organic-inorganic compound fertilizer,commercial organic fertilizer,water-soluble fertilizer and compound fertilizer are discussed and prospected.
Release Kinetic Models and Release Mechanisms of Controlled-Release and Slow-Release Fertilizers

Nadeeka Lakshani,H. S. Wijerathne,Chanaka Sandaruwan,Nilwala Kottegoda,Veranja Karunarathne

DOI: https://doi.org/10.1021/acsagscitech.3c00152

2023-10-31

ACS Agricultural Science & Technology

Abstract:The theory of slow release and controlled release has the versatility of applications in pharmaceuticals, fertilizers, and agrochemicals. In controlled-release and slow-release administration, inorganic and organic materials and polymers that are both degradable and nondegradable have numerous uses. Research on release kinetics reveals how material systems work. Release kinetics can be determined using statistical methods, model-based methods (curve fitting techniques), and model-independent techniques. Curve-fitting techniques have been applied to describe drug-releasing behaviors in pharmaceuticals. This review describes curve-fitting methods used by researchers to analyze the nutrient release profile using different models, such as zero-order, first-order, Higuchi, Korsmeyer–Peppas, Hixson–Crowell root law, Ritger–Peppas, Peppas–Sahlin, and Weibull models. These drug-release models have successfully explained the release behavior of controlled-release and slow-release fertilizers and agrochemicals. Fertilizer type, rate of application, application time frame, and application location are all crucial factors in nutrient management. The known transport and release mechanisms support increasing profitability and adhere to nutrient best management practices. Hence, in this study, we will review existing controlled- and slow-release fertilizer systems in detail that are explained using the aforementioned modeling approaches (empirical and mechanistic) to discuss recent developments and applications of controlled- and slow-release fertilizer systems.
Research Progress in Lignin‐Based Slow/Controlled Release Fertilizer

Jing Chen,Xiaolin Fan,Lidan Zhang,Xiaojuan Chen,Shaolong Sun,Run‐Cang Sun

DOI: https://doi.org/10.1002/cssc.202000455

IF: 8.4

2020-05-25

ChemSusChem

Abstract:As a skeleton component of plants, lignin is a kind of organic macromolecule polymer which can be regenerated and naturally degraded. Annually, plant growth produces about 150 billion tons of lignin. In recent industrial processes, large amounts of lignin are remained as by‐products, such as the paper industry and the biomass refining industry. Most of technical lignins were direct combusted to obtain heat, which not only caused by the waste of organic matter, but also led to environmental pollution and other issues. Interestingly, lignin can be used as slow release carriers and coating materials for fertilizers due to its excellent slow release property, chelating, and and other functions. Manufactures of lignin‐based slow/controlled release fertilizer are studied by sustainable chemical (ammoxidation, Mannich reaction, and other chemical modification), coating (without or with chemical modification), and chelation modification. This review systematically summarizes the methods, mechanisms, and application of the above methods for preparing lignin‐based slow/controlled release fertilizers. Although the evaluation standards and methods of lignin‐based slow/controlled release fertilizers are not perfect, it is believed that more and more scholars will pay more attention to them to accelerate the development and application of lignin‐based slow/controlled release fertilizers, so as to improve their relevant standards. In short, there is an urgent need to improve the preparation process of lignin‐based slow/controlled release fertilizer, and apply lignin‐based slow/controlled release fertilizer to production practice as soon as possible.

chemistry, multidisciplinary,green & sustainable science & technology
N release characteristics of controlled/slowed-release fertilizer in different media and its effects evaluation

Du Jian

Abstract:Several media (water, soil, sand, mixture of soil and sand, and mixture of soil and zeolite) were used to study the nutrient release characteristics of five controlledrelease fertilizers (CRFs) or slowrelease fertilizers (SRFs). The results showed that for a fertilizer there were significant differences in release pattern and release rate when dissolving or leaching in different media due to the different properties. So considerable errors might occur if water dissolution rate method was used to estimate the fertilizer efficiency although the method can make quick comparisons of nutrient release rates among different CRFs/SRFs. More objective and reasonable evaluation of CRFs/SRFs should be taken in the system of "Fertilizersoilcrop". Comparatively, soil column leaching method was much closer to the field reality than water dissolution rate method.

Environmental Science,Agricultural and Food Sciences
Study on the Slow-release Performance of Zinc and Manganese Slow-release Compound Fertilizer

XU Xiao-ping,ZHANG Yong-li,DENG Bei-wei,GAO Xiao-xia,LI Le

2008-01-01

Abstract:A zinc and manganese slow-release compound fertilizer produced by chemical methods was introduced in this paper.The slow-release performance was determined with sand culture method.The results showed that: compared to ordinary fertilizer,this slow-release fertilizer supply nutrients to plants more stable and gradually.
Controlled Release Fertilizers: A Review on Coating Materials and Mechanism of Release

Dora Lawrencia,See Kiat Wong,Darren Yi Sern Low,Bey Hing Goh,Joo Kheng Goh,Uracha Rungsardthong Ruktanonchai,Apinan Soottitantawat,Learn Han Lee,Siah Ying Tang

DOI: https://doi.org/10.3390/plants10020238

2021-01-26

Plants

Abstract:Rising world population is expected to increase the demand for nitrogen fertilizers to improve crop yield and ensure food security. With existing challenges on low nutrient use efficiency (NUE) of urea and its environmental concerns, controlled release fertilizers (CRFs) have become a potential solution by formulating them to synchronize nutrient release according to the requirement of plants. However, the most significant challenge that persists is the “tailing” effect, which reduces the economic benefits in terms of maximum fertilizer utilization. High materials cost is also a significant obstacle restraining the widespread application of CRF in agriculture. The first part of this review covers issues related to the application of conventional fertilizer and CRFs in general. In the subsequent sections, different raw materials utilized to form CRFs, focusing on inorganic and organic materials and synthetic and natural polymers alongside their physical and chemical preparation methods, are compared. Important factors affecting rate of release, mechanism of release and mathematical modelling approaches to predict nutrient release are also discussed. This review aims to provide a better overview of the developments regarding CRFs in the past ten years, and trends are identified and analyzed to provide an insight for future works in the field of agriculture.

plant sciences
Release characteristics of a new controlled release fertilizer

Uri Shavit,Avi Shaviv,Gil Shalit,Dan Zaslavsky

DOI: https://doi.org/10.1016/s0168-3659(96)01478-2

IF: 11.467

1997-01-01

Journal of Controlled Release

Abstract:A new type of controlled release fertilizer which enables control over both release rate and release pattern was developed. A dry mixture of soluble fertilizer and thickener is contained in a non-permeable envelope, having at least one small opening. Two main processes govern the release of nutrients from the device: (a) water penetrates through the opening(s) into the dry mixture forming a distinct and sharp wetting front. The process starts with a `burst' of water into the device; (b) nutrients leave the device through the opening either by diffusion alone or by diffusive and convective flows. Since the time pattern of the transport processes may have different forms, a simple model was used to describe the extent of wetting or release, M, as a function of time, t; M(t) = Ctα, where C and α are parameters. Several factors which affect both the water penetration and the nutrients release were investigated: fertilizer type (solubility, density), thickener type (Na-polyacrylamide and Na-carboxymethylcellulose), thickener concentration in the dry mixture, size of the device, and opening diameter. It was found that the rate of wetting and the magnitude of the `burst' effect increase with fertilizer solubility. This is reflected in the rate of nutrients release which generally increases with fertilizer solubility. Increasing thickener concentration results in a reduced rate of wetting and a smaller burst effect. In some cases, the time pattern of wetting shifts from Fickian (α ≈ 0.5) to linear (α ≈ 1.0). Consequently, the release itself is affected in a similar manner. Reducing the diameter of the opening, reduces significantly the wetting rate and even more so the release of nutrients. A decrease in the opening diameter results in a linear release pattern. The ability to control both the rate and the time pattern of the release through different combinations of the main factors is discussed and demonstrated.

pharmacology & pharmacy,chemistry, multidisciplinary
Slow Release Characteristics of the Low Molecular Weight Polylactic Acid-Coated Urea and Its Reduction Effects on Soil Ammonia Volatilization

LI Dan,SUN Jian-bing,NI Wu-zhong

DOI: https://doi.org/10.3864/j.issn.0578-1752.2012.02.010

2012-01-01

Abstract:【Objective】 This paper presented an approach for preparing low molecular weight polylactic acid (PLA)- coatedslow-release urea. The release behavior and reduction of ammonia volatilization after the coated urea added into soil were studied. 【Method】 By spouted-spraying methods, film coated urea fertilizers were prepared with two types of low molecular weight PLA(relative molecular weight-RMW5000 and RMW10000) respectively, retreated with paraffin wax as sealant or not, thus four typesof coated urea were obtained. The structure of coating film was observed by scanning electronic microscopy (SEM), nitrogen releasewas investigated by a soil column leaching method, and ammonia volatilization was determined with an incubation experiment. 【Result】 SEM images showed that both of RMW5 000 and RMW10 000 PLA as a film coated on the surface of granular urea.Paraffin wax used as a sealant could fill up the micro holes or cracks in the coating film. Under the same nitrogen dose added, theamounts of total nitrogen leaching from soil column of the treatments with coated urea were significantly lower than that of thenormal urea treatment, implying that the slow-release effectiveness of coated urea is clear. In the incubation experiment, it was foundthat nitrogen losses through ammonia volatilization of the treatments with coated urea were significantly lower than that of the ureatreatment. 【Conclusion】 Low molecular weight PLA coated urea is a new environment-friendly type of slow-release fertilizer, andits application in sustainable agriculture is prospective.
Recent progress in the development of encapsulated fertilizers for time-controlled release

Alexey P Dovzhenko,Olga A Yapryntseva,Kirill O Sinyashin,Tinatin Doolotkeldieva,Rustem R Zairov

DOI: https://doi.org/10.1016/j.heliyon.2024.e34895

IF: 3.776

2024-07-20

Heliyon

Abstract:This review describes the latest achievements in the development of encapsulated controlled-release fertilizers, which encompasses sustainability issues in agriculture. The research community's interest in this particular area of science has doubled over the last couple of years due to the yearly increasing complexity of the food and supply situation, as well as maintaining the development of modern society in the era of population outbreak. This review covers demand in timely systematization and comprehensive analysis of emerging research in so-called "smart fertilizers" that release mineral components in accordance with the needs for nutrients classified into controlled- and slow-release fertilizers (CRFs and SRFs). Along with the thoroughly selected fundamental studies published in this area, the review specially focuses on the materials-based classification, emphasizing the importance of the host matrix in the time-controlled release of dopant. This substantially differentiates our review and renders scientific novelty and relevancy to it. The review is divided into sections, dealing with the types of slow- and controlled-release fertilizers each, and supplemented with the critical view on their usage. All data regarding encapsulated fertilizers in this review are systematized for the convenience of the readership when becoming familiarized with the latest achievements in this area. Perspectives and potential pathways are also described to recommend and guide researchers working on the related academic fields.
A landscape review of controlled release urea products: Patent objective, formulation and technology

Weiyi Liu,Sally Price,Grant Bennett,Thomas M R Maxwell,Cunyi Zhao,Greg Walker,Craig Bunt

DOI: https://doi.org/10.1016/j.jconrel.2022.06.009

Abstract:Fertiliser has been a vital part of agriculture due to it boosting crop productivity and preventing starvation throughout the world. Despite this huge contribution, the application of nitrogen (N) fertilisers results in N leaching and the formation of greenhouse gases, which threaten the environment and human health. To minimise the impacts, slow/controlled release fertilisers (S/CRFs) have been being developed since the beginning of the 20th century. Despite the efforts made over a century, the basic terminological and classification information of these fertilisers remains vague. The scientific knowledge published in S/CRF patents has also been overlooked since the beginning. This review focused on the information gaps, clarified the definitions, differentiation and classification methods that have been randomly used in previous literature. The objectives, formulations and technologies of 109 controlled release urea patents involving sulphur coated urea, polymer coated urea and urea matrix fertilisers published in the years since these products emerged were also reviewed to 1) highlight the overlooked scientific knowledge in the patents; 2) understand the evolutionary processes and current research states of the products; 3) clarify research preferences and challenges to date; 4) identify remaining gaps for the future direction. It is expected that the organised basic information and the patent knowledge highlighted in this paper can be new resources and foster the development of S/CRFs in the future.
The preparation of slow-release fertilizers with biomass ash and water/waste acid solutions from desulfurization and denitrification of flue gas

Yongfeng Qi,Ziqian Wang,Panle Ge,Meiting Wang,Chuanling Zhang,Huawei Wang,Lingzhi Zhao,Jiang Wu,Yan Li

DOI: https://doi.org/10.1007/s11356-022-19868-7

IF: 5.8

2022-03-30

Environmental Science and Pollution Research

Abstract:In this study, a method of preparing fertilizers with the fly ash from biomass power plants and the waste acid solution from flue gas desulfurization and denitrification was disclosed. In addition, the study also explored the effects of added fine particles, unburned biochar, and other commercial fertilizers on soil water retention and slow-release effect of fertilizers. The analysis was done by comparing the aggregation degrees of crystalline salt and the variations of the chemical bonds. The experimental results showed that the added fine particles could effectively increase the water absorption of fertilizers, which helped to improve soil water retention. Meanwhile, the fine particles could strengthen the special adsorption of basic compounds containing N, P, and other nutrients by biochar and enhance the slow-release effect of fertilizers. Although adding part commercial fertilizers weakened the water absorption of fertilizers slightly, it had only a relatively small effect on the aggregation of water-soluble crystalline salt on the surfaces of fine particles and biochar. Furthermore, the microwave was applied to promote the absorption of N by unburned biochar, during which only small amounts of volatile were released and lost. The experiments had confirmed that microwave irradiation could promote the agglomeration of biochar on crystalline salt effectively, thus enhancing the slow-release effect of crystalline salt in fertilizers. Finally, pot experiments demonstrated that the self-prepared fertilizer improved plant growth by its better water absorption and slow-release properties during the whole growth period, which had promising application potential as the slow-release fertilizer in the plant growth field.

environmental sciences
Preparation of Microcapsules of Slow-Release NPK Compound Fertilizer and the Release Characteristics

Wancheng Pang,Dejia Hou,Huan Wang,Shu Sai,Baorui Wang,Jingwen Ke,Gaobing Wu,Qing Li,Mark T. Holtzapple,Mark Holtzapple

DOI: https://doi.org/10.21577/0103-5053.20180117

2018-01-01

Journal of the Brazilian Chemical Society

Abstract:In this study, a novel type of slow-release fertilizer (SRF) was synthesized through lignin-based microcapsules. K2HPO4 and urea were coated by lignin and formaldehyde to prepare microcapsules of NPK compound SRF. The slow-release performance was measured by determining the NPK contents in water solution and soil column leaching. The release amounts of N, P and K after 5 days were 95.39, 95.28 and 96.75% in water, and 83.35, 96.62 and 90.75% in soil, respectively. The properties of SRF were analyzed by Fourier transform infrared spectroscopy, thermogravimetry and scanning electron microscopy. NPK release from the SRF was promoted by higher temperature and acid environment, but inhibited by alkaline environment. The first order kinetics equation provides the best correlation to describe nutrient release characteristics. The results indicated that SRF have good slow-release properties and are cost-saving and environment-friendly, and thus can efficiently improve the utilization efficiency of fertilizers in agricultural production.

chemistry, multidisciplinary
Effects of Different Types of Slow- and Controlled-Release Fertilizers on Rice Yield

Wu Qiong,Wang Yu-hui,Ding Yan-feng,Tao Wei-ke,Gao Shen,Li Quan-xin,Li Wei-wei,Liu Zheng-hui,Li Gang-hua

DOI: https://doi.org/10.1016/s2095-3119(20)63406-2

IF: 4.8

2021-01-01

Journal of Integrative Agriculture

Abstract:This experiment explored the effects of single application of seven types of slow- and controlled-release fertilizers on rice yield and various population characteristics. Based on a study of the nitrogen (N) release characteristics of these fertilizers, pot experiments were conducted in 2018 and 2019 with split fertilization (CK, urea applied split equally at basal and panicle initiation stages, respectively) as control, which assessed the effects on SPAD value, yield and yield components, dynamic changes of rice tillers and dry matter accumulation. The results showed that the N release characteristics of different types of slow- and controlled-release fertilizers were significantly different. Polymer-coated urea (PCU) showed a controlled-release mode and provided sustained release throughout the whole growth stages. Sulfur-coated urea (SCU) exhibited a slow-release mode, providing insufficient release at the middle and late stages. Urease inhibitor urea (AHA) and urea-formaldehyde (UF) yielded a rapid-release mode, with an explosive N release at the early stage and no release at the middle and late stages. These results showed that PCU delayed the peak seedling stage. Compared with CK, dry matter accumulation and SPAD showed no significant differences, and due to the continuous release of N throughout the growth stages, rice yield, spikelets per panicle, seed setting rate, and 1 000-grain weight were all increased. Owing to the lack of N supply at the late stage and the low number of spikelets, SCU led to a reduction of rice yield, which is nevertheless not statistically significant. AHA and UF were susceptible to environmental factors and had varying effects on rice yield. The results of this experiment indicated that given a fixed amount of N applied in a pot, the stronger the N supply capacity and the longer the effective duration time of the fertilizer, the higher the dry matter accumulation at the late growth stage, and the higher the rice yield.
Application of lignin in preparation of slow-release fertilizer: Current status and future perspectives

Jiajun Lu,Mingyang Cheng,Chao Zhao,Bin Li,Hehuan Peng,Yongjian Zhang,Qianjun Shao,Muhammad Hassan

DOI: https://doi.org/10.1016/j.indcrop.2021.114267

IF: 6.449

2022-02-01

Industrial Crops and Products

Abstract:Lignin is the most abundant renewable aromatic resource on the Earth, which can be used for producing bio-products to support human sustainable development. Due to the dual challenges of resources and environment, how to effectively utilize this kind of abundant, degradable, and renewable natural polymer has attracted great attention. In recent years, there are many studies on lignin-based slow-release fertilizer duo to its excellent slow release properties. As a carrier of nutrients, lignin-based physically impeded fertilizer can be realized by absorbing and wrapping nutrients, and lignin-based chemically modified fertilizer can be realized by chemical reaction between lignin and nutrients. In this paper, we reviewed the application of lignin in preparation of slow-release fertilizer. The possible pathways and release mechanisms of physically impeded and chemically modified slow-release fertilizer were discussed. Although there was no uniform evaluation standard for slow-release fertilizer, its three common evaluation criteria were analyzed. With the expansion of the function of slow-release fertilizer, the evaluation system should be broadened and diversified. Finally, the challenges and future prospects of lignin-based slow-release fertilizer were discussed. The application of lignin-based slow-release fertilizer has great potential for promoting resource utilization and environmental protection.

agronomy,agricultural engineering
Application of slow-controlled release fertilizer coordinates the carbon flow in carbon-nitrogen metabolism to effect rice quality

Zhengrong Jiang,Qiuli Chen,Dun Liu,Weike Tao,Shen Gao,Jiaqi Li,Chunhao Lin,Meichen Zhu,Yanfeng Ding,Weiwei Li,Ganghua Li,Soulaiman Sakr,Lihong Xue

DOI: https://doi.org/10.1186/s12870-024-05309-9

2024-06-29

Abstract:Slow-controlled release fertilizers are experiencing a popularity in rice cultivation due to their effectiveness in yield and quality with low environmental costs. However, the underlying mechanism by which these fertilizers regulate grain quality remains inadequately understood. This study investigated the effects of five fertilizer management practices on rice yield and quality in a two-year field experiment: CK, conventional fertilization, and four applications of slow-controlled release fertilizer (UF, urea formaldehyde; SCU, sulfur-coated urea; PCU, polymer-coated urea; BBF, controlled-release bulk blending fertilizer). In 2020 and 2021, the yields of UF and SCU groups showed significant decreases when compared to conventional fertilization, accompanied by a decline in nutritional quality. Additionally, PCU group exhibited poorer cooking and eating qualities. However, BBF group achieved increases in both yield (10.8 t hm-2 and 11.0 t hm-2) and grain quality reaching the level of CK group. The adequate nitrogen supply in PCU group during the grain-filling stage led to a greater capacity for the accumulation of proteins and amino acids in the PCU group compared to starch accumulation. Intriguingly, BBF group showed better carbon-nitrogen metabolism than that of PCU group. The optimal nitrogen supply present in BBF group suitable boosted the synthesis of amino acids involved in the glycolysis/ tricarboxylic acid cycle, thereby effectively coordinating carbon-nitrogen metabolism. The application of the new slow-controlled release fertilizer, BBF, is advantageous in regulating the carbon flow in the carbon-nitrogen metabolism to enhance rice quality.
Research on the Effects of Macromolecule Compound Materials on Release Characteristics of Different Forms of Nitrogen Nutrients

乔菊,蔡冬清,姜疆,卞坡,吴跃进,余增亮

DOI: https://doi.org/10.3969/j.issn.0517-6611.2008.15.106

2008-01-01

Abstract:[Objective]The research aimed to provide reference for the exploitation of new fertilizer.[Method]To control the penetration lose of fertilizer nutrition,a macromolecule compound material was mixed into ordinary fertilizer pro rat.By eluviation experiment,the release characteristics of different forms of N nutrient of the new fertilizer and the ordinary fertilizer were studied in the medium of sand.[Result]N-nutrient of the new fertilizer released slowly and steadily.Compared with ordinary fertilizer,the macromolecule compound material could reduce the loss of ammonium-N by 40%,the loss of saltpeter-N by 50%,the loss of urea-N by 23%,loss of total-N of the compound fertilizer by 50%.The release of the fertilizer could be described quantitatively by three equations: linear equation y=a+bt,parabola equation y=a+bt+ct2 and the first-order kinetica equation y=a(1-e-kt).And the imitation of the first-order kinetics equation was the best,the parabola equation took second place.[Conclusion]The penetration lose of fertilizer nutrition can be controlled by mixing macromolecule compound fertilizer pro rata.
Meticulous Overview on the Controlled Release Fertilizers

Siafu Ibahati Sempeho,Hee Taik Kim,Egid Mubofu,Askwar Hilonga

DOI: https://doi.org/10.1155/2014/363071

2014-08-28

Advances in Chemistry

Abstract:Owing to the high demand for fertilizer formulations that will exhaust the possibilities of nutrient use efficiency (NUE), regulate fertilizer consumption, and lessen agrophysicochemical properties and environmental adverse effects instigated by conventional nutrient supply to crops, this review recapitulates controlled release fertilizers (CRFs) as a cutting-edge and safe way to supply crops’ nutrients over the conventional ways. Essentially, CRFs entail fertilizer particles intercalated within excipients aiming at reducing the frequency of fertilizer application thereby abating potential adverse effects linked with conventional fertilizer use. Application of nanotechnology and materials engineering in agriculture particularly in the design of CRFs, the distinctions and classification of CRFs, and the economical, agronomical, and environmental aspects of CRFs has been revised putting into account the development and synthesis of CRFs, laboratory CRFs syntheses and testing, and both linear and sigmoid release features of CRF formulations. Methodical account on the mechanism of nutrient release centring on the empirical and mechanistic approaches of predicting nutrient release is given in view of selected mathematical models. Compositions and laboratory preparations of CRFs basing on in situ and graft polymerization are provided alongside the physical methods used in CRFs encapsulation, with an emphasis on the natural polymers, modified clays, and superabsorbent nanocomposite excipients.
A novel synthetic slow release fertilizer with low energy production for efficient nutrient management

Junyin Li,Yan Liu,Jin Liu,Xian Cui,Tiandong Hou,Dongdong Cheng

DOI: https://doi.org/10.1016/j.scitotenv.2022.154844

2022-07-01

Abstract:Chemical synthetic slow release fertilizer had become a major breakthrough in the green fertilizer industry due to its superior nutrient management and degradation properties. However, the traditional chemical synthetic slow release fertilizers contain only nitrogen and consume high energy during drying. Herein, a low cost green chemical synthetic slow release fertilizer (PSRF/KCl) was prepared from urea, formaldehyde and diammonium phosphate by spray drying method. Compared with the traditional drying process, the comprehensive energy consumption is reduced by 38.13%. The SEM, FTIR, and TG characteristics of PSRF/KCl showed that it has excellent water solubility, special morphological characteristics and thermal properties. In addition, the application of PSRF/KCl in Chinese cabbage showed that PSRF/KCl could increase the yield by 26.2%. All the results showed that PSRF/KCl is a green chemical synthetic slow release fertilizer, which has broad application prospects in modern sustainable agriculture, and its matching spray drying process can effectively reduce production costs.

environmental sciences
Release Characteristics of Nutrients from Polymer-coated Compound Controlled Release Fertilizers

Chang-wen Du,Jian-ming Zhou,Avi Shaviv

DOI: https://doi.org/10.1007/s10924-006-0025-4

IF: 4.705

2006-07-22

Journal of Polymers and the Environment

Abstract:Reliable information regarding release characteristics of nutrients from a polymer-coated controlled release fertilizer (CRF) is essential for beneficial agronomic and environmental results. Significant knowledge regarding nitrogen release from polymer-coated urea was gained while the information regarding the release of the different nutrients contained in polymer-coated compound N–P–K CRF remains limited. An experiment in which major factors affecting the differential release of nutrients from two coated compound CRF was performed in free water, water saturated sand and sand at field capacity. In general, nitrate release was the fastest, followed by ammonium and potassium whereas phosphate was significantly slower, with a rate of linear release in free water 45–70% slower than that of nitrate. Little differences were obtained for the lag periods of nitrate, ammonium and potassium release (2–10 days) under the experimental conditions, whereas for P they were one order of magnitude larger. The main factor slowing the release was assumed to be the lower solubility of ions with P being the least soluble. Release into free water was, expectedly, somewhat faster than that into saturated sand and significantly faster as compared to sand at field capacity and particularly so for P. Raising the temperature from 20 °C to 40 °C increased the rate of linear release of the different nutrients. The energy of activation, EArel, estimated for the linear release, of the different nutrients, was narrow ranging between 37 to 46 (KJ mol−1) whereas the mean values obtained for the two CRF, differing by 50% in coating thickness, was non-significant. However, EArel was significantly different in different media. The complex effect of temperature on the lag period and nutrient interactions during release deserve further investigation.

engineering, environmental,polymer science

Development Status and Research Trends of Slow/Controlled Release Fertilizer

Development in Polymer Latex Coated Fertilizer for Controlled Release

Discussions on development of new type fertilizer in China

Release Kinetic Models and Release Mechanisms of Controlled-Release and Slow-Release Fertilizers

Research Progress in Lignin‐Based Slow/Controlled Release Fertilizer

N release characteristics of controlled/slowed-release fertilizer in different media and its effects evaluation

Study on the Slow-release Performance of Zinc and Manganese Slow-release Compound Fertilizer

Controlled Release Fertilizers: A Review on Coating Materials and Mechanism of Release

Release characteristics of a new controlled release fertilizer

Slow Release Characteristics of the Low Molecular Weight Polylactic Acid-Coated Urea and Its Reduction Effects on Soil Ammonia Volatilization

Recent progress in the development of encapsulated fertilizers for time-controlled release

A landscape review of controlled release urea products: Patent objective, formulation and technology

The preparation of slow-release fertilizers with biomass ash and water/waste acid solutions from desulfurization and denitrification of flue gas

Preparation of Microcapsules of Slow-Release NPK Compound Fertilizer and the Release Characteristics

Effects of Different Types of Slow- and Controlled-Release Fertilizers on Rice Yield

Application of lignin in preparation of slow-release fertilizer: Current status and future perspectives

Application of slow-controlled release fertilizer coordinates the carbon flow in carbon-nitrogen metabolism to effect rice quality

Research on the Effects of Macromolecule Compound Materials on Release Characteristics of Different Forms of Nitrogen Nutrients

Meticulous Overview on the Controlled Release Fertilizers

A novel synthetic slow release fertilizer with low energy production for efficient nutrient management

Release Characteristics of Nutrients from Polymer-coated Compound Controlled Release Fertilizers