Abstract:The ultraviolet (UV) light wavelengths, typically defined to range from10-400nm, have proven to be useful for a number of applications, such as astronomy, biology, medicine and so on. It is important for us to study on the UV and related devices. In this paper, a novel and effective grating coupler for ultraviolet light was reported, which can couple efficiently ultraviolet light from fiber to waveguide at the wavelength of 300nm. The grating coupler was based on the oxide layer of silicon surface, because ultraviolet light can be transmitted pure silicon dioxide (SiO2) with low loss. Based on Bragg condition of grating, we use FDTD method to simulate and design the grating parameters operated under TM polarization. Using our optimization design parameters (period T, incident angle θ, filling factor f and etching height h) to optimize the mode matching between the fiber and the grating region, a relatively high coupling efficiency was obtained for the fiber and waveguide interface. In our design, filling factor f=0.55, period T=280nm etching height H=110nm, incident angle θ=11° can be realized in the process of manufacture. But coupling efficiency are sensitivity to the range of period of grating and incident angle θ, which increase the difficulty of processing and experiment, the process of technology and operation need high precision. Consequently, we the coupling efficiency can be largely increased and beyond 88.5% at center wavelength of 296nm and 1dB bandwidth, in which the theory analysis and the simulation results are in good agreement and coupling efficiency is the highest for this kind of coupler reported as we known. This kind submicron-sized SiO2 waveguides that can be fabricated by mature CMOS-compatible processes are showing promise for realistic dense photonic integrated circuit (PIC) in various applications including optical communications, optical interconnects, signal processing and sensing. The gratings open the path to pure silicon dioxide for ultraviolet the enabling new nonlinear optical functions as well as new spectroscopic lab on-a chip approaches.

Sub-microns period grating couplers fabricated by silicon mold

Fabrication of grating couplers using submicron silicon mold

Fabrication-friendly High-Efficiency Silicon Nitride Grating Coupler

High-efficiency Grating Coupler Based on Fast Directional Optimization and Robust Layout Strategy in 130 Nm CMOS Process.

High-efficiency Wideband SiNx-on-SOI Grating Coupler with Low Fabrication Complexity.

High-efficiency hybrid amorphous silicon grating couplers for sub-micron-sized lithium niobate waveguides.

Compact microring resonators integrated with grating couplers working at 2 μm wavelength on silicon-on-insulator platform.

Fabrication Sub-Micron Gratings Based on Embossing

A Polymer-Based Surface Grating Coupler with an Embedded Si3n4 Layer

Grating Coupler Design for Low-Cost Fabrication in Amorphous Silicon Photonic Integrated Circuits

Coloration of Surfaces with Periodic Microstructures Replicated by Nonisothermal Precision Molding

Fabrication Tolerance Analysis of Grating Couplers Between Optical Fibers and Silicon Waveguide

High-performance Full-Etched Fiber-to-chip Grating Couplers at 3.7-Micron Wavelength on Silicon

A High-Performance and Cost-Effective Grating Coupler for Ultraviolet Light

A New Silicon Mold Process for Polydimethylsiloxane Microchannels

Efficient Fiber to Waveguide Coupling Structure for Optical Systems Integration Using Grayscale Lithography

Fabricated Technology for Polymer/si Arrayed Waveguide Grating

The 2-Μm Fully-Etched Silicon Grating Coupler

Fabrication of the Grating Mold with Micro-Patterns on the Cylindrical Surface by Step Rotating Lithography

A Novel Method to Fabricate Silicon Tubular Gratings with Broadband Antireflection and Super-Hydrophobicity

100 Nm Period Gratings Produced by Lithographically Induced Self-Construction