Abstract:Acoustic cavitation serves various therapeutic purposes, with both microbubbles and phase-transit droplets serving as potential cavitation nuclei. This project focused on investigating the intricate interaction between microbubbles and droplets and the resultant impact on acoustic cavitation. To facilitate this investigation, microbubbles with a negative potential of −51.58 mV were prepared, while droplets were endowed with a positive potential of +4.22 mV, facilitating the formation of microbubble-droplet clusters. Microscopic analysis was employed to observe the morphology of these clusters, revealing an initial mean size of 4.85 μm before ultrasound activation and subsequent transformation into larger bubbles with a mean size of 12.54 μm after ultrasound activation. The experimental approach involved the use of varying driven voltages to generate ultrasound waves with different intensities. A passive cavitation detector (PCD) was then employed to capture cavitation signals. Results demonstrated that, when maintaining a microbubble ratio of 50% and varying droplet ratios from 0% to 50%, the driven voltage at which the cavitation peak appeared decreased from 180 mV to 140 mV. Additionally, the mean cavitation intensity exhibited an initial increase from 0.58 to 0.78, followed by a subsequent decrease from 0.78 to 0.63 after normalization. This study provided valuable insights into the dynamic interactions between microbubbles and droplets. Specifically, it showed that microbubble cavitation transferred energy to droplets, leading to the generation of larger bubbles and higher cavitation intensity. Nevertheless, the observed cavitation intensity and threshold were contingent upon the ratios of microbubbles and droplets. Notably, to achieve an ideal cavitation intensity, the energy generated by microbubble cavitation must be substantial enough to activate all droplets, inducing acoustic droplet vaporization (ADV) and cavitation.

Mass transfer induced by coalescence and slip of ultrasonic cavitation bubbles at phase interface

Study of Wave-Induced Mass Transport and Internal Mixing Based on a Two-Liquid VOF Model

Interaction Between Encapsulated Microbubbles: A Finite Element Modelling Study

Trial 2D Simulation of Microbubble Interaction Based on Multi-Scale Multiphase Flow Equation(Fluids Engineering)

Fundamental Numerical Simulation of Microbubble Interaction Using Multi-scale Multiphase Flow Equation

Study on Multi-scale Modeling of Gas-Liquid Interface and Microbubble Coalescence

Simulation of the Ultrasonic Cavitation Process of the Double-Bubble

Fundamental Study of Microbubble Coalescences Based on Multi-Scale Multiphase Flow Equations(Fluids Engineering)

Numerical Study on Mass Transfer of a Vapor Bubble Rising in Very High Viscous Fluid

Multi-Scale Modeling of the Gas-Liquid Interface Based on Mathematical and Thermodynamic Approaches~!2009-11-08~!2010-03-22~!2010-05-17~!

Experimental and numerical investigations of motion and mass transfer of single bubbles in a turbulent flow chamber

Coupling Between High-Pressure Bubble and Viscous Multiphase Flow Interface

Modelling of microbubble coalescence

Multi-bubble Motion Behavior of Uniform Magnetic Field Based on Phase Field Model

Three-Dimensional Numerical Simulation of Air Exhausted from Submerged Nozzles

Mass transfer of microbubble in liquid under multifrequency acoustic excitation - A theoretical study

Mass transfer of chemical specie in acoustic cavitation bubble

Ultrasound-assisted gas–liquid mass transfer process in microreactors: The influence of surfactant, channel size and ultrasound frequency

A mixture model with modified mass transfer expression for cavitating turbulent flow simulation

Enhanced microbubble-mediated cavitation by using acoustic droplet vaporization

The velocity field around two interacting cavitation bubbles in an ultrasound field