Abstract:A solvent recycling reflux extraction process for Panax notoginseng was optimized using a design space approach to improve the batch-to-batch consistency of the extract. Saponin yields, total saponin purity, and pigment yield were defined as the process critical quality attributes (CQAs). Ethanol content, extraction time, and the ratio of the recycling ethanol flow rate and initial solvent volume in the extraction tank (RES) were identified as the critical process parameters (CPPs) via quantitative risk assessment. Box-Behnken design experiments were performed. Quadratic models between CPPs and process CQAs were developed, with determination coefficients higher than 0.88. As the ethanol concentration decreases, saponin yields first increase and then decrease. A longer extraction time leads to higher yields of the ginsenosides Rb-1 and Rd. The total saponin purity increases as the ethanol concentration increases. The pigment yield increases as the ethanol concentration decreases or extraction time increases. The design space was calculated using a Monte-Carlo simulation method with an acceptable probability of 0.90. Normal operation ranges to attain process CQA criteria with a probability of more than 0.914 are recommended as follows: ethanol content of 79-82%, extraction time of 6.1-7.1 h, and RES of 0.039-0.040 min(-1). Most of the results of the verification experiments agreed well with the predictions. The verification experiment results showed that the selection of proper operating ethanol content, extraction time, and RES within the design space can ensure that the CQA criteria are met.

Optimizing the Extraction Process of Total Saponins from Panax Japonicus by Uniform Design

Studies on Extraction Process Optimization of Panax Notogingseng Saponins

Extraction Process Optimization for Total Saponins from Roots of Panax Notoginseng by Orthogonal Design

Optimization of Extraction Procession for Total Saponins from Cortex Albizziae

Optimization of Ultrahigh Pressure Extraction Technology of Total Saponins from Panax notoginseng by Response Surface Method

Optimization Of The Ethanol Recycling Reflux Extraction Process For Saponins Using A Design Space Approach

Optimization of Panax Notoginseng Extraction Process Using a Design Space Approach

Optimum Technique of Extracting Total Ginseng Saponin from Root of Ginseng by Supersonic Wave Using Central Composite Design-Response Surface Methodology

Chromatographic elution process design space development for the purification of saponins in Panax notoginseng extract using a probability-based approach.

Optimization of Extraction Technics of Total Saponins from Pulsatilla Cernua

Study on Ultrasonic Extraction of Total Saponin from Polygala

The Optimization of the Extracting Process for Steroidal Saponin from Paris Polyphylla Based on Uniform Design

Optimization of Ultrasonic Extraction of Total Saponins from Marsdenia tenacissima by Box-Behnken Re-sponse Surface Method and Its Purification Technology

Optimization of Extraction Process of Total Saponins from Syringa Oblate Lindl.leaves by Response Surface Methodology

Use of Response Surface Methodology for Optimization of Ultrasound-assisted Extraction of Total Saponins from Asparagus officinalis L.

[Optimization of Purification Conditions for with Macroporous Adsorption Resin Total Saponins from Smilax China].

Optimizing the Extraction Process of Andrographis Panniculata by Uniform Design

Optmization of the Extraction Technology of the Allium Chinensis G.Don Saponins by Response Surface Methodology

Preparation and Content Determination of Total Saponins from Panax notoginseng Transdermal Gel Ointments

Optimisation of Ethanol-Reflux Extraction of Saponins from Steamed Panax notoginseng by Response Surface Methodology and Evaluation of Hematopoiesis Effect

Extraction and Isolation of Notoginseng Saponin Within Panax Notoginseng by Decompressive Internal Boiling Extraction