Abstract:A solvent recycling reflux extraction process for Panax notoginseng was optimized using a design space approach to improve the batch-to-batch consistency of the extract. Saponin yields, total saponin purity, and pigment yield were defined as the process critical quality attributes (CQAs). Ethanol content, extraction time, and the ratio of the recycling ethanol flow rate and initial solvent volume in the extraction tank (RES) were identified as the critical process parameters (CPPs) via quantitative risk assessment. Box-Behnken design experiments were performed. Quadratic models between CPPs and process CQAs were developed, with determination coefficients higher than 0.88. As the ethanol concentration decreases, saponin yields first increase and then decrease. A longer extraction time leads to higher yields of the ginsenosides Rb-1 and Rd. The total saponin purity increases as the ethanol concentration increases. The pigment yield increases as the ethanol concentration decreases or extraction time increases. The design space was calculated using a Monte-Carlo simulation method with an acceptable probability of 0.90. Normal operation ranges to attain process CQA criteria with a probability of more than 0.914 are recommended as follows: ethanol content of 79-82%, extraction time of 6.1-7.1 h, and RES of 0.039-0.040 min(-1). Most of the results of the verification experiments agreed well with the predictions. The verification experiment results showed that the selection of proper operating ethanol content, extraction time, and RES within the design space can ensure that the CQA criteria are met.

Extraction and Isolation of Notoginseng Saponin Within Panax Notoginseng by Decompressive Internal Boiling Extraction

Effect of Fermentation-Assisted Extraction on the Bioactivity of Panax Notoginseng Saponins

Studies on Extraction Process Optimization of Panax Notogingseng Saponins

Selectivity Separation of Saponins from Panax Notoginsenoside

Studies on Process for Purification and Decolorization of Panax Notoginseng Saponins

Preparative separation of minor saponins from Panax notoginseng leaves using biotransformation, macroporous resins, and preparative high-performance liquid chromatography

Enhanced Extraction and Preconcentration of Main Target Saponins from Panax Notoginseng Root Using Green and Efficient Formulated Surfactant Aqueous Systems

Optimization Of The Ethanol Recycling Reflux Extraction Process For Saponins Using A Design Space Approach

Integrated metabolomic and transcriptomic analyses revealed the distribution of saponins in Panax notoginseng

A New Two-Dimensional Chromatographic Method for Separation of Saponins from Steamed Panax Notoginseng.

Towards efficient extraction of notoginseng saponins from cultured cells of Panax notoginseng

Chromatographic elution process design space development for the purification of saponins in Panax notoginseng extract using a probability-based approach.

SEPARATION AND PURIFICATION OF 5 SAPONINS FROM Panax Notoginseng BY PREPARATIVE HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY

Smashing Tissue Extraction and HPLC Determination of Active Saponins from Different Parts of Panax Notoginseng

Chemical transformation and target preparation of saponins in stems and leaves of Panax notoginseng

Extraction Process Optimization for Total Saponins from Roots of Panax Notoginseng by Orthogonal Design

Extraction of Panax Notogingseng Saponins with Supercritical Carbon Dioxide

[A technological study on the extraction of ultra-fine powder of Panax notoginsen]

[Isolation and Identification of Minor Bioactive Saponins from the Leaves of Panax Notoginseng].

Analysis of Saponins from Panax notoginseng Using Pressurized Solvent Extraction Coupled with High Performance Thin Layer Chromatography

Effective release of ginseng saponin from suspension cells of Panax notoginseng