Abstract:The flexural performance of polyvinyl alcohol-steel hybrid fiber reinforced engineered cementitious composite with characteristics of low drying shrinkage special focus on impacts of steel fiber content and matrix strength has been investigated in both experimental and theoretical aspects in this paper. Four matrix types with water to binder ratio of 0.25, 0.35, 0.45, and 0.55 and three additional steel fiber contents in the composite with polyvinyl alcohol fiber content of 1.7% in volume were used in the test program. The experimental results show that cracking and flexural strength of the composites are increased with the addition of steel fiber. This enhancement becomes more and more pronounced with decreasing of water to binder ratio of the composites. Meanwhile, fracture mechanics-based flexural model is used to simulate the flexure performance of the polyvinyl alcohol -steel hybrid fiber reinforced engineered cementitious composite with characteristics of low drying shrinkage. The model results show that a double peak load is expected of the composites under bending load. The first peak is controlled by the fracture toughness of matrix or cracking strength of matrix, and the second peak is governed by the fiber bridging. The effect of addition of steel fiber in engineered cementitious composite with characteristics of low drying shrinkage on the first peak is unapparent. The impact of steel fiber on the second peak is significant. This enhancement of additional steel fiber gradually decreases with the decrease of water to binder ratio of the matrix, which coincides well with the experimental findings. The test results are compared to the model and reasonable agreement is found.

FLEXURAL PROPERTIES OF FIBER REINFORCED CEMENT BOARD AND COMPOSITE BEAMS

Mechanical Properties and Durability of Extruded Fiber Reinforced Cement Mortar Board and Its Composite Beam

Investigation on Flexural Performance of RC Beams Flexurally Strengthened by Side-bonded CFRP Laminates

Effect of PE Fiber Content on Mechanical Behavior of Cementitious Composite

Influence of Fiber Type on Mechanical Properties of Lightweight Cement-Based Composites

Experimental study on mechanical behavior of PE fiber cementitious composite

Investigation On Flexural Behavior Of Reinforced Concrete Beams Flexurally Strengthened By Different Methods

Experimental on the Behavior of Beams Strengthened by Polymer-modified Fiber Cement Mortar Under Hydrothermal Conditions

Tensile Properties of Fiber Reinforced Cement Composite with Different PVA Fibers

Tensile Performance of High Ductile Fiber Reinforced Cementitious Composite

Experimental and theoretical investigations on flexural performance of hybrid fiber reinforced ECC-NC composite beams

Behavior of Preloaded RC Beams Strengthened with CFRP Laminates

Study on bending failure and crack characteristics in ductile fiber‐reinforced concrete beams

Flexural behaviour of high strength engineered cementitious composites (ECC)-reinforced concrete composite beams

Flexural performance test of carbon fiber reinforced composite sandwich beams with cedarwood core

BENDING PERFORMANCE OF DUCTILE FIBER REINFORCED CEMENTITIOUS COMPOSITE

Investigation of the flexural behavior of reinforced concrete beams strengthened with a composite reinforcement layer: Polyvinyl alcohol fiber‐reinforced ferrocement cementitious composite and steel wire mesh

Flexural Behavior of PVA‐FRC GFRP Reinforced Concrete Beams

Simulation and test of flexural performance of polyvinyl alcohol-steel hybrid fiber reinforced cementitious composite

Experiment on the Flexural Properties of Simply Supported Polypropylene Fibers Reinforced Concrete Beams

Comparison of the Properties of Fiber Reinforced Cement Boards Made with Extruded Dewatering and Ordinary Casting Methods