Abstract:Pristine and functionalized multiwalled carbon nanotubes (MWNTs) were used to fabricate polyamide 6 (PA6) composites through melt blending. The functionalized MWNTs were obtained by grafting 1,6-hexamethylenediamine (HMD) onto the pristine MWNTs to improve their compatibility with PA6 matrix. The effect of MWNTs on the isothermal crystallization and melting behavior of PA6 was investigated by differential scanning calorimetry (DSC) and X-ray diffraction (XRD). The Avrami and Lauritzen-Hoffmann equations are used to describe the isothermal crystallization kinetics. The values of the Avrami exponent found for neat PA6, the pristine MWNTs/PA6 and functionalized MWNTs/PA6 composite samples are about 4.0, 1.7, and 2.3, respectively. The activation energies are determined by the Arrhenius method, which is lower for the composites, -320.52 KJ/mol for pristine MWNTs/PA6 and -293.83 KJ/ mol for functionalized MWNTs/PA6, than that for the neat PA6 (-284.71 KJ/mol). The following melting behavior reveals that all the isothermally crystallized samples exhibit triple melting endotherms at lower crystallization temperature and double melting endotherms at higher crystallization temperature. The multiple melting endotherms are mainly caused by the recrystallization of PA6 during heating. The resulting equilibrium melting temperature is lower for the composites than for neat PA6. In addition, polarizing microscopy (PLM) and small angle light scanning (SALS) were used to study the spherulite morphology. The results show that the MWNTs reduce the spherulite radius of PA6. This reduction is more significant for pristine MWNTs. (C) 2007 Wiley Periodicals, Inc.

Functionalization of multi-walled carbon nanotubes grafted with self-generated functional groups and their polyamide 6 composites

Functionalization of Carbon Nanotubes by Corona‐Discharge Induced Graft Polymerization for the Reinforcement of Epoxy Nanocomposites

Functionalization of Flame-Synthesized Carbon Nanotube and Its Application in Polystyrene Composites

Preparation of amine-modified multiwalled carbon nanotubes and their use in composites

Functionalization Multi-walled carbon nanotube and Its Bismaleimide Composites of Properties

Improving dispersion of multiwalled carbon nanotubes in polyamide 6 composites through amino-functionalization

Mechanical and Thermal Properties of Functionalized Multiwalled Carbon Nanotubes/Cyanate Ester Composite

Functionalization and application of multi-walled carbon nanotubes

Chemical functionalization of multiwalled carbon nanotubes by hexamethylene diamine

Functionalization Of Multi-Walled Carbon Nanotubes By Thermo-Grafting With Alpha-Methylstyrene-Containing Copolymers

Functionalized carbon nanotube/polyacrylonitrile composite nanofibers: Fabrication and properties

Functionalization Of Multiwalled Carbon Nanotubes By Amidation And Michael Addition Reactions And The Effect Of The Functional Chains On The Properties Of Waterborne Polyurethane Composites

Crystallization and Rheological Behaviors of Amino-Functionalized Multiwalled Carbon Nanotubes Filled Polyamide 6 Composites

Grafting Polyamide 6 Onto Multi-Walled Carbon Nanotubes Using Microwave Irradiation

Functionalization of multi-wall carbon nanotubes with silane and its reinforcement on polypropylene composites

Isothermal Crystallization Kinetics and Melting Behavior of Multiwalled Carbon Nanotubes/polyamide‐6 Composites

Interface Enhancement of Glass Fiber/Vinyl Ester Composites with Carbon Nanotubes Synthesized from Ethanol Flames

Fabrication and Properties of Polyamide-6,6-functionalized Carboxylic Multi-walled Carbon Nanotube Composite Fibers

Functionalization of multi-walled carbon nanotubes with thermo-responsive azide-terminated poly(N-isopropylacrylamide) via click reactions.

Effects of Functionalization MWCNTs on the Mechanical and Electrical Properties of Nylon-6 Composites

Functionalization of Multiwalled Carbon Nanotubes with Hyperbranched Polyester