Abstract:Acoustic Emission (AE) waveforms contain information on microscopic structural features that can be related with damage of coal rock masses. In this paper, the Hilbert-Huang transform (HHT) method is used to obtain detailed structural characteristics of coal rock masses associated with damage, at different loading stages, from the analyses of the characteristics of AE waveforms. The results show that the HHT method can be used to decompose the target waveform into multiple intrinsic mode function (IMF) components, with the energy mainly concentrated in the C1–C4 IMF components, where the C1 component has the highest frequency and the largest amount of energy. As the loading continues, the proportion of energy occupied by the low-frequency IMF component shows an increasing trend. In the initial compaction stage, the Hilbert marginal spectrum is mainly concentrated in the low frequency range of 0–40 kHz. The plastic deformation stage is associated to energy accumulation in the frequency range of 0–25 kHz and 200–350 kHz, while the instability damage stage is mainly concentrated in the frequency range of 0–25 kHz. At 20 kHz, the instability damage reaches its maximum value. There is a relatively clear instantaneous energy peak at each stage, albeit being more distinct at the beginning and at the end of the compaction phase. Since the effective duration of the waveform is short, its resulting energy is small, and so there is a relatively high value from the instantaneous energy peak. The waveform lasts a relatively long time after the peak that coincides with failure, which is the period where the waveform reaches its maximum energy level. The Hilbert three-dimensional energy spectrum is generally zero in the region where the real energy is zero. In addition, its energy spectrum is intermittent rather than continuous. It is therefore consistent with the characteristics of the several dynamic ranges mentioned above, and it indicates more clearly the low-frequency energy concentration in the critical stage of instability failure. This study well reflects the response law of geophysical signals in the process of coal rock instability and failure, providing a basis for monitoring coal rock dynamic disasters.

Feature extraction of AE characteristics in offshore structure model using Hilbert–Huang transform

AE feature extraction and signal representation model based on wavelet packet decomposition

Application of AE Techniques for the Detection of Wind Turbine Using Hilbert-Huang Transform

HHT-based AE Characteristics of Natural Fatigue Cracks in Rotating Shafts

Dynamic feature evaluation and information mining for AE data stream

Resolution of Structure Characteristics of AE Signals in Multiphase Flow System—from Data to Information

Evaluating Onset Times of Acoustic Emission Signals Using Histogram Distances

Feature Extraction Of Impulse Faults For Vibration Signals Based On Sparse Non-Negative Tensor Factorization

Wavelet and Fractal Analysis of Acoustic Emission Characteristic of Fatigue Damage of Asphalt Mixtures

Feature Extraction of Acoustic Emission Signals Based on Fractal Dimension and Independent Component Analysis

Feature Extraction of Rubbing Fault Based on AE Techniques

Modal acoustic emission-based circumferential crack feature extractions for pipeline welds with L-shaped flexible sensor array

Application of Hilbert–Huang transform for defect recognition in pulsed eddy current testing

A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms

Detection of the instantaneous frequency degradation due to damages of a fixed offshore jacket platform using the iEEMD‐based Hilbert Huang transform under a wave excitation

A New Quantitative Acoustic Emission Model for Damage Characterization of Composite Laminates Using Original Waveforms

Adaptive Fault Feature Extraction Based on Stationary Wavelet Packet Decomposition and Hilbert Transform

A novel feature representation method based on original waveforms for acoustic emission signals

AE waveform characteristics of rock mass under uniaxial loading based on Hilbert-Huang transform

Characterizing Acoustic Sources in Pressure Vessels

Application of Hilbert-Huang Transform in Structural Health Monitoring: A State-of-the-Art Review