Abstract:In the calculation of process dimensions in the machining of porous parts, the traditional method is complicated in the establishment of the dimensional chain, it is easy to make mistakes in the judgment of increasing and decreasing loops, and there is difficulty in the calculation process; thus, this paper puts forward a method that combines the process path with the design path to analyze the hole system dimensions in response to these problems. First of all, the combination of the process path and design path is used to establish a system of vector equations and, according to the system of vector equations, to establish a matrix model to calculate the process dimensions based on the system of vector equations to construct the process dimensional chain and the dimensional chain function; then, the principle of differentiation is used to carry out a tolerance analysis of the process dimensions, which avoids the drawing of dimensional chain diagrams and the judgement of the incremental/decremental loops. Finally, the development of a process dimension analysis tool for hole system dimensions is completed based on CATIA CAA. In order to verify the effectiveness of the proposed method, the analysis tool was used to solve the three labeling methods of the hole system dimensions of porous parts and compared with the results calculated using the traditional method, and it was found that some of the tolerance results obtained by the proposed method were enlarged by about 50%, which is more in line with the actual production situation. Finally, in order to verify the accuracy of the tool's calculation results, three porous parts were machined according to the process dimensions and tolerances calculated by the tool, and the center distance of each hole was measured by a coordinate meter. These measurements were compared and analyzed with the design dimensions specified in the engineering drawings, and it was found that the center distances of the holes were in full compliance with the design requirements.

Computer Solution of the Radial Process Size of the Rotational Parts in the CAPP System

The method of rotary part informations describing and inputting of CAPP

Computer Solution of Process Size on the Base of Graphic Tracing Method

Studying on the Technique of Integration Analysis to Rigid-Flexible Mixture Virtual Prototyping in Complex Mechanic System

Variant Computer Aided Process Planning System for Rotational Parts

A Study on CAPP Technology of the Parts Based on Combination Unit Library

Design and development of CAPP developing tool

Computer Aided System Development for Complex-shaped Part and Tool Design

APPLICATION OF COMPUTER AIDED PROCESS PLANNING TECHNIQUES TO SPACECRAFT INTEGRATED ASSEMBLY

An Integrated Approach to Process Planning and NC Machining of Rotational Components

CAAPP System Based on Pro/E Production Tree

VISUAL PROCESS PLANNING

CAAPP system based on the production tree created by Pro/E

Development of three-dimensional CAD/CAPP system for crank shaft TR forging device

A Novel Hole System Dimension Analysis Tool Based on the Combination of the Process Path and Design Path

THCAPP: Computer Aided Process Planning System in an Integrated Environment

The CAD for the Accuracy of Involute Cylindrical Gears

A Method of Generating Spiral Tool Path for Direct Three-Axis Computer Numerical Control Machining of Measured Cloud of Point

Developing of CAPP System for Die Forging on Hammer

RESEARCH ON KEY TECHNOLOGIES OF USER FRAME SYSTEM IN CAPP DEVELOPING TOOL

Computer Aided Design Based on Visual FORTRAN and AutoCAD