Abstract:A series of narrow band-gap conjugated copolymers (PFO-DDQ) derived from 9,9-dioctylfluorene (DOF) and 2,3-dimethyl-5,8-dithien-2-yl-quinoxalines (DDQ) is prepared by the palladium-catalyzed Suzuki coupling reaction with the molar feed ratio of DDQ at around 1%, 5%, 15%, 30% and 50%, respectively. The obtained polymers are readily soluble in common organic solvents. The solutions and the thin solid films of the copolymers absorb light from 300–590 nm with two absorbance peaks at around 380 and 490 nm. The intensity of 490 nm peak increases with the increasing DDQ content in the polymers. Efficient energy transfer due to exciton trapping on narrow-band-gap DDQ sites has been observed. The PL emission consists exclusively of DDQ unit emission at around 591–643 nm depending on the DDQ content in solid film. The EL emission peaks are red-shifted from 580 nm for PFO-DDQ1 to 635 nm for PFO-DDQ50. The highest external quantum efficiency achieved with the device configuration ITO/PEDOT/PVK/PFO-DDQ15/Ba/Al is 1.33% with a luminous efficiency 1.54 cd/A. Bulk heterojunction photovoltaic cells fabricated from composite films of PFO-DDQ30 copolymer and [6,6]-phenyl C61 butyric acid methyl ester (PCBM) as electron donor and electron acceptor, respectively in device configuration: ITO/PEDOT:PSS/PFODDQ30: PCBM/PFPNBr/Al shows power conversion efficiencies of 1.18% with open-circuit voltage (V oc) of 0.90 V and short-circuit current density (J sc) of 2.66 mA/cm2 under an AM1.5 solar simulator (100 mW/cm2). The photocurrent response wavelengths of the PVCs based on PFO-DDQ30/PCBM blends covers 300–700 nm. This indicates that these kinds of low band-gap polymers are promising candidates for polymeric solar cells and red light-emitting diodes.

Narrow blue light-emitting diodes based on a copolymer consisting of fluorene and quinoline units

Narrow Emission from Polyimide Light-Emitting Diodes

High-efficiency Blue-Light-emitting Diodes with Narrow Linewidth Based on Blends of Poly[2-(2′-ethylhexyloxy)-1,4-phenylene] and Poly(dialkylfluorene-Co-dibenzothiophene)

Efficient Ultraviolet-Blue Polymer Light-Emitting Diodes Based on a Fluorene-Based Non-Conjugated Polymer

Ultrapure blue organic light-emitting diodes exhibiting 13 nm full width at half-maximum

Fluorene‐Based Single‐Chain Copolymers for Color‐Stable White Light‐Emitting Diodes

Extremely Stable Deep-Blue Organic Light-Emitting Diodes Employing Diindolophenazine-Based Fluorophore with Narrow-Band Emission and a Shallow LUMO Level

A Wide‐Bandgap Semiconducting Polymer for Ultraviolet and Blue Light Emitting Diodes

Fluorene-based copolymers for color-stable blue light-emitting diodes

Novel, Blue Light-Emitting Polyfluorenes Containing a Fluorinated Quinoxaline Unit

Triphenylamine and Quinoline-Containing Polyfluorene for Blue Light-Emitting Diodes

Photo- and Electroluminescence Properties of Fluorene-Based Copolymers Containing Electron- or Hole-Transporting Unit

BLUE ELECTROLUMINESCENCE FROM A PROCESSABLE DERIVATIVE OF PPV BASED COPOLYMER WITH TRI(ETHYLENE OXIDE) SIGMENTS IN THE BACKBONE

Blue Polymer Light-Emitting Diodes from Poly(9,9-Dihexylfluorene-Alt-Co-2,5-Didecyloxy-Para-Phenylene)

FLUORENE-BASED COPOLYMERS FOR RED LIGHT-EMITTING DIODES AND BULK HETEROJUNCTION PHOTOVOLTAIC CELL

Fluorene- And Benzimidazole-Based Blue Light-Emitting Copolymers: Synthesis, Photophysical Properties, And Pled Applications

Single Layer Light‐emitting Diodes from Copolymers Comprised of Mesogen‐jacketed Polymer Containing Oxadiazole Units and PVK

New Efficient Blue Light Emitting Polymer for Light Emitting Diodes

Toward Narrowband and Efficient Blue Fluophosphors by Locking the Stretching Vibration of Indolocarbazole Skeletons

Efficient Polyfluorene Derivatives for Blue Light-Emitting Diodes Enabled by Tuning Conjugation Length of Bulky Chromophores

Synthesis and Characterization of Hyperbranched Polyfluorenes Containing Triarylpyrazoline Cores Towards Efficient Blue Light‐emitting Diodes