Abstract:The structural strain plays a significant role in structural condition assessment of in-service bridges in terms of structural bearing capacity, structural reliability level and entire safety redundancy. Therefore, it has been one of the most important parameters concerned by researchers and engineers engaged in structural health monitoring (SHM) practices. In this paper, an SHM system instrumented on the Jiubao Bridge located in Hangzhou, China is firstly introduced. This system involves nine subsystems and has been continuously operated for five years since 2012. As part of the SHM system, a total of 166 fiber Bragg grating (FBG) strain sensors are installed on the bridge to measure the dynamic strain responses of key structural components. Based on the strain monitoring data acquired in recent two years, the strain-based structural condition assessment of the Jiubao Bridge is carried out. The wavelet multi-resolution algorithm is applied to separate the temperature effect from the raw strain data. The obtained strain data under the normal traffic and wind condition and under the typhoon condition are examined for structural safety evaluation. The structural condition rating of the bridge in accordance with the AASHTO specification for condition evaluation and load and resistance factor rating of highway bridges is performed by use of the processed strain data in combination with finite element analysis. The analysis framework presented in this study can be used as a reference for facilitating the assessment, inspection and maintenance activities of in-service bridges instrumented with long-term SHM system.

Damage identification of expansion joints in long span bridge using long-term monitoring data

Assessment of bridge expansion joints using long-term displacement measurement under changing environment

Assessment of bridge expansion joints using long-term displacement measurement under changing environmental conditions

Condition Assessment of Expansion Joint of a Cable-Stayed Bridge Based on Long-Term Monitoring

Assessment of Bridge Expansion Joints Using Long-Term Displacement and Temperature Measurement

Damage alarming for bridge expansion joints using novelty detection technique based on long-term monitoring data

Evaluation on Expansion Joint Performance of Cable-stayed Bridge Based on Long-term Health Monitoring Data

Structural condition assessment of long-span suspension bridges using long-term monitoring data

Displacement Monitoring and Analysis of Expansion Joints of Long-Span Steel Bridges with Viscous Dampers

SHM-based condition assessment of expansion Joints in suspension Bridges

Field Monitoring and Response Characteristics of Longitudinal Movements of Expansion Joints in Long-Span Suspension Bridges

Damage Identification of a Long-Span Suspension Bridge Using Temperature-Induced Strain Data

Strain-temperature Correlation Analysis of a Tied Arch Bridge Using Monitoring Data

Strain-Based Structural Condition Assessment of an Instrumented Arch Bridge Using Fbg Monitoring Data

Damage Detection for Expansion Joints of a Combined Highway and Railway Bridge Based on Long-Term Monitoring Data

Structural Damage Alarming Of Suspension Bridge Based On Seasonal Correlation Of Beam-End Displacements And Temperature

Research on Mapping Relationship Between Environmental Load and Vibration Response of Bridge Structure Based on Structural Health Monitoring Data

Incorporating Site-Specific Weigh-in-motion Data into Fatigue Life Assessment of Expansion Joints under Dynamic Vehicle Load

Evaluations On Dynamic Behaviors And Its Environmental Influence Factors Of Bridge Based On Long Term Monitoring

Damage Alarming of Long-Span Suspension Bridge Based on GPS-RTK Monitoring