Hollow Zinc Oxide Microsphere–Multiwalled Carbon Nanotube Composites for Selective Detection of Sulfur Dioxide
Ni Luh Wulan Septiani,Adhitya Gandaryus Saputro,Yusuf Valentino Kaneti,Arifin Luthfi Maulana,Fadjar Fathurrahman,Hyunsoo Lim,Brian Yuliarto,Nugraha,Hermawan Kresno Dipojono,Dmitri Golberg,Yusuke Yamauchi
DOI: https://doi.org/10.1021/acsanm.0c01707
IF: 6.14
2020-08-31
ACS Applied Nano Materials
Abstract:This work reports the first utilization of anthocyanin extracted from black rice (<i>Oryza sativa L</i>.) grains as a structure-directing agent for the synthesis of hollow zinc oxide (ZnO) spheres via a simple solvothermal reaction and their subsequent modifications with various amounts of multiwalled carbon nanotubes (MWCNTs). Following hybridization with MWCNTs, some MWCNTs are observed to penetrate into the inner cavities of the spheres, while ZnO nanoparticles are formed on the surface of some MWCNTs. When employed as a sulfur dioxide (SO<sub>2</sub>) sensor, the ZnO–MWCNT (15:1) composite displays a high response of 156 to 70 ppm of SO<sub>2</sub> at an optimum temperature of 300 °C as well as good selectivity to SO<sub>2</sub> with the response to 50 ppm of SO<sub>2</sub> gas being 3 times higher than those to other gases, such as CO, CO<sub>2</sub>, methanol, toluene, hexane, and xylene. Interestingly, the sensing behavior of this composite is strongly influenced by the proportion of MWCNTs. Specifically, n-type sensing behavior is observed for both ZnO–MWCNT (10:1) and (15:1) composites, while p-type behavior is observed for the ZnO–MWCNT (5:1) composite. The switch in sensing behavior suggests the major contribution of p-type MWCNTs to the electronic and sensing properties of the ZnO/MWCNT composites. The density functional theory (DFT) simulations on the adsorption of SO<sub>2</sub> on the ZnO/CNT system reveal that the SO<sub>2</sub> molecule only chemically interacts with the O adatom of ZnO (i.e., oxygen atom adsorbed on the surface of ZnO) to form sulfur trioxide (SO<sub>3</sub>), and charge transfer is observed from ZnO to CNT, which enhances the change in resistance of the composite sensor upon exposure to SO<sub>2</sub> gas.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.0c01707?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.0c01707</a>.Extraction of anthocyanin process; XRD patterns of MWCNTs before and after acid treatment; SEM images of ZnO products obtained with different amounts of anthocyanin; SEM images of the MWCNTs before and after acid treatment; TEM and HRTEM images of ZnO–MWCNT composites; UV–vis absorption spectra and Tauc's plots of ZnO and ZnO–MWCNT composites; N<sub>2</sub> sorption isotherms of functionalized MWCNTs; Arrhenius plots of ZnO and ZnO–MWCNT composites; dynamic response–recovery curves of MWCNTs toward different concentrations of SO<sub>2</sub> gas at 300 °C; comparison of the SO<sub>2</sub> sensing performance of the as-prepared ZnO–MWCNT (15:1) composite against previously reported metal oxide-based sensors (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.0c01707/suppl_file/an0c01707_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology