Abstract:A quasi-continuous-wave (QCW) laser diode (LD) driver is commonly used to drive diode bars and stacks designed specifically for QCW operations in solid-state lasers. Such drivers are optimized to deliver peak current and voltage pulses to LDs while maintaining low average power levels. As a result, they are widely used in laser processing devices and laser instruments. Traditional high-energy QCW LD drivers primarily use capacitors as energy storage components and pulsed constant-current sources with op-amps and power metal-oxide-semiconductor field-effect transistors (MOSFETs) as their core circuits for generating repeated constant-current pulses. The drawback of this type of driver is that the driver's output voltage needs to be manually adjusted according to the operating voltage of the load before use to maximize driver efficiency while providing a sufficient current. Another drawback is its inability to automatically adjust the output voltage to maintain high efficiency when the load changes during the driver operation. Drastic changes in the load can cause the driver to fail to function properly in extreme cases. Based on the above traditional circuit structure, this study designed a stability compensation circuit and realized a QCW LD driver for driving a GS20 diode stack with a maximum repetition rate of 100 Hz, a constant current of approximately 300 A, a load voltage of approximately 10 V, and a pulse width of approximately 300 μs. In particular, a high-efficiency, load-adaptive driving method was used with the MOSFETs in the critical saturation region (i.e., between the linear and saturated regions), controlling its power loss effectively while achieving maximum output current of the driver. The experiments demonstrated that the driver efficiency could be maintained at more than 80% when the load current varied from 50 to 300 A.

Design of implement of a novel temperature compensation circuit for laser drivers

An Improved Temperature Compensation Circuit for SLD Light Source of Fiber-Optic Gyroscope

A LED Driver IC with Constant Current and Temperature Compensation

Thermal Effects of High-Power Side-Pumped Alkali Vapor Lasers and the Compensation Method

On-chip variable gain temperature compensation amplifier

Design of a New Temperature Compensating System for High Power Circulator of EAST LHCD System

Design of the Temperature Controlling Module of Driving Control System of Fiber Laser Pump Source

Novel Semiconductor Lasers and Integrated Photonic Devices

A New Cmos Current Reference with High Order Temperature Compensation

Design of temperature control circuit for laser diode based on MAX1968

Design of LD Current Drivers of Pump-Modules in Fiber Amplifiers

Frequency Compensation Based Pump Laser Drive Circuit with High Stability

Design of High Frequency Modulation System of Semiconductor Laser Based on PSpice

High-Precision Semiconductor Laser Current Drive and Temperature Control System Design

Design of Driving and Temperature Control Circuitry for VCSEL

Tunable V-Cavity Semiconductor Laser And Modules

A bipolar temperature controller with high precision for laser diode

A Design of Temperature Adaptively Adjustable Driver for LD Array

A Load-Adaptive Driving Method for a Quasi-Continuous-Wave Laser Diode

High Frequency Modulation Technology of Quasi-continuous Semiconductor Laser

Design and Implementation of a Power Semiconductor-Based Switching Mode Laser Diode Driver