Abstract:The evolution of oxygen-functioning groups in sewage sludge based carbon is influenced by minerals presented in the raw sludge. In this study, the FeCl3 and polyacrylamide conditioned sludge in real wastewater treatment plant and demineralized sludge were carbonized in the temperature range of 300°C–800°C to investigate the roles of temperature and ash components on the interactions between surface groups conversion and crystalline structure evolution. The temperature-dependent ash effect on the conversion of oxygen containing groups was found by using XPS, Boehm titration, XRD and TPR characterization. The phase transfer of hematite to magnetite promoted the formation of hydrophilic organic groups at 600°C, which may play a significant role on carbon’s adsorptive and catalytic behavior. To gain an in-depth knowledge and understanding, the as-prepared carbon was used as heterogeneous catalyst in persulfate degradation of a model pollutant 2-Naphthol. The use of carbon obtained at 600°C (MC600) can achieve 88.7% and 47% of 2-Naphthol and TOC removal respectively at neutral pH, far higher than that of MC prepared at 300 and 800°C. Further research revealed a strong correlation between adsorptive and catalytic efficiency of MC and its mineral structure, surface functional groups as well as operating pH. The formed hydrophilic oxygen-containing groups at higher temperature of MC600 are responsible for 2-Naphthol retention and the hydrogen bonds in siloxane bridges can easily adsorb persulfate. The pH effect on degradation in the presence of persulfate verified the broad pH operation, which is apparently superior than conducting with traditional heterogeneous Fenton process. The quenching experiments and EPR spectrum were further used to detect the oxidative species SO4- and HO, and confirmed the catalytic role of MC.

Temperature-programmed desorption of pyridine on solid superacids

Temperature Programmed Desorption of Basic Probes on Solid Superacids

Temperature-Programmed Desorption of Pyridine on Zeolites in the Presence of Liquid Solvents

Sorption of Organic Compounds by Pyrolyzed Humic Acids

Analysis of thermal processing applied to contaminated soil for organic pollutants removal

Temperature Programmed Desorption - an Application to Kinetic Studies of Co Desorption at Electrochemical Interfaces

Identification of Intermediates in Pyridine Pyrolysis with Molecular-Beam Mass Spectrometry and Tunable Synchrotron Vuv Photoionization

Temperature Programmed Desorption and Thermal-Decomposition of N-Butylamine on Zeolite Hzsm-5

Adsorption of pyridine from aqueous solutions onto polyaluminium chloride and anionic polyacrylamide water treatment residuals

Study of the adsorption reactions of thiophene on Cu(I)/HY-Al 2O 3 by fourier transform infrared and temperature- programmed desorption: Adsorption, desorption, and sorbent regeneration mechanisms

Liquid-liquid Phase Equilibrium Measurements, Thermodynamic Modelling and Quantum Chemical Analysis for the Separation of Pyridine-Water Azeotropic Systems

Experimental and Theoretical Studies on Decomposition of Pyrrolidine

Determination of Integrated Molar Extinction Coefficients for Infrared Absorption Bands of Pyridine Adsorbed on Solid Acid Catalysts

Temperature-Programmed Desorption of Single Zeolite Nanoparticles

4.22 Characterization of Solid Superacidity by N-Alkane Isomerization Reactions at Low Temperature

Characterization of Solid Superacidity by Pentane Isomerization Reaction

Pyrolytic Temperature Dependent Conversion of Sewage Sludge to Carbon Catalyst and Their Performance in Persulfate Degradation of 2-Naphthol

TEMPERATURE PROGRAMMED DESORPTION-MASS SPECTROMETRY STUDY OF NO DESOrPTION AND DECOMPOSITION BY TITANIA SUPPORTED 12-TUNGSTOPHOSPHORIC ACID

Confirmation of Phase Transitions and Laser-Assisted Chemical Reaction for Pyridine under High Pressure

Probing the Catalytic Center of TiO 2 /SO 4 2− Solid Superacid Catalyst by X-Band in Situ High-Temperature EPR Spectroscopy

Adsorption and Thermal Dissociation of Pyrrole on Si(1 0 0)-2 × 1