Optimization of Liquid Nitrogen and Carbon Dioxide Cleanup Technology

ZHANG Bo,WEN Qing-Zhi,Mingliang Luo,ZHAI Heng-Li,YU Jiao-Jiao,LIU Guang-Zhong
DOI: https://doi.org/10.19346/j.cnki.1000-4092.2012.01.016
2012-01-01
Abstract:The task of how to improve flow back ratio,decrease the formation damage caused by fracturing liquid,and achieve high flow conductivity of artificial fracture had already become a vital question for the reservoir stimulation technology.Through the physical and chemical behavior analysis of nitrogen and carbon dioxide,their cleanup mechanism was researched,the flowing-back model of accompanying gas was built,and the design software of accompanying gas was drawn up.Associating with oilfield examples,the affecting elements of accompanying gas were researched,meanwhile the parameters of flowing back technology were optimized.The results showed that when the well depth and pump injection increased or start-up pressure gradient decreased,the companion ratio and the companion displacement of liquid nitrogen injection increased.The companion ratio of liquid nitrogen injection increased about 0.3% as the well depth increasing per 100 meters,and that decreased about 0.6% as the start-up pressure gradient increasing per 0.01 MPa/m.The change rate of bottom pressure was the same as that of head pressure in a well.The bottom pressure of a well increased about 5 MPa when the wellhead pressure increased 5 MPa.With increasing injection rate,the pressure of the well bore decreased.The bottom pressure of a well decreased about 1.75 MPa when the injection rate increased 0.5 m3/min.When the mathematic model was applied in Shengli oilfield,the fracturing liquid flow back rate achieved 90%,and the fracturing well production increased by 2.7 times.Field application showed that the mathematic model worked reasonably,and accounting parameters were accurate and reliable which could be used to guide field construction.
What problem does this paper attempt to address?