Abstract:Light olefins are mainly made from petrochemical industry. These short-chain hydrocarbons including ethylene and propylene are traditionally produced by steam cracking of naphtha or as byproducts of oil refining processes. Fischer−Tropsch synthesis obtains long-chain hydrocarbons from syngas (a mixture of H2 and CO). A promising process to produce lower olefins from synthesis gas is so-called FTO process. A variety of catalysts have been explored for FTO reaction. Unsupported iron oxide catalysts have been investigated, and in some cases they have exhibited high selectivity towards lower olefins when the iron was modified by the addition of promoters. However, the bulk catalysts are mechanically unstable when the reaction is performed at high temperature, which would swiches product selectivity to higher hydrocarbons. Under these conditions, the undesirable boundouard reaction 2CO(g)→C(s) + CO2(g), leads to the deposition of carbon. The poor mechanical stability of the bulk catalysts may lead to plugging of the catalyst bed in fixed-bed operation or to fouling of the separation equipment in a fluidized bed process. To overcome the low activity and stability problems, the use of supported iron catalyzts have been explored. The FTO reaction is a structure sensitive reaction. The catalytic performance is strongly related to the particle size of the metal or active phase. The addition of support changed the morphology of the catalyst and affects the particles size and dispersion. Iron forms mixed oxides when supported on alumina or silica which are difficult to reduce, and the formation of the active iron carbide phase is hindered. The MgO supported catalyst shown a more dispersion of the particles and also has shown lower particles adhesion, consequently shown a better catalytic performance. In the case of CNF supported catalysts, iron loading is directly related to particle size, thus higher iron contents result in larger iron-containing particles. The iron nanoparticles supported on CNF have narrow size distributions and they are homogeneously distributed on the support . In order to optimize the support of FTO catalysts, MgO modified Al2O3 supports have been studied in this research.

Preparation and Catalytic Properties of MgFe_(0.1)Al_(1.9)O_4 in Oxidative Dehydrogenation of Ethylbenzene with CO_2

Effect of support texture properties on Ni-Fe/γ-Al_2O_3 catalyst structure and catalytic performance for CO methanation

Hydrogenation of CO to olefins over a supported iron catalyst on MgAl2O4 spinel: effects of the spinel synthesis method

Dehydrogenation of Ethane to Ethylene in the Presence of CO2 over Calcined Mg-Fe and Mg-Fe-Al Hydrotalcite Compounds as Catalysts

Effect of CO 2 Co-Feeding on the Stabilization of Atomically Dispersed Iron Species over MgAl 2 O 4 During Ethane Dehydrogenation Reactions

Ga-Doped MgAl2O4 Spinel As an Efficient Catalyst for Ethane Dehydrogenation to Ethylene Assisted by CO2

Ce-doped mesoporous alumina supported Fe-based catalyst with high activity for oxidative dehydrogenation of 1-butene using CO2 as soft oxidant

Study of Oxidative Dehydrogenation of Ethylbenzene with CO2 on Supported CeO2-Fe2O3 Binary Oxides

Dehydrogenation of Ethylbenzene in the Presence of CO2 over Catalysts Prepared from Hydrotalcite-Like Precursors

Enhancing the synergism of Fe3O4 and Fe5C2 to improve the process of CO2 hydrogenation to olefines

Activity of Highly Dispersed Α-Fe2o3 on Molecular Sieves for Ethylbenzene Dehydrogenation

Preparation and Characterization of Fe/MgO Catalysts Obtained from Hydrotalcite-Like Compounds

Insight to structure-activity relationship of non-stoichiometric CuMgAl spinel catalysts for CO hydrogenation to dimethyl ether: Effect of MgO doping amount

Supported Vanadia Catalysts for Dehydrogenation of Ethylbenzene with CO 2

Highly active Pd-Fe/α-Al2O3 catalyst with the bayberry tannin as chelating promoter for CO oxidative coupling to diethyl oxalate

Oxidative Dehydrogenation of Ethylbenzene with Carbon Dioxide over Metal-Doped Titanium Oxides

Selective Oxidation of Styrene over Nanosized Spinel-Type Mg Fe3−O4 Complex Oxide Catalysts

Effective Iron Catalysts Supported on Mixed MgO-Al<sub>2</sub>O<sub>3</sub> for Fischer-Tropsch Synthesis to Olefins

Selective oxidation of styrene on Mg-Fe spinel complex oxide catalysts

MgO modification of Fe-based Al2O3 catalysts for the coversion of syngas to light olefins

FeOx-Modified Ultrafine Platinum Particles Supported on MgFe2O4 with High Catalytic Activity and Promising Stability toward Low-Temperature Oxidation of CO