Abstract:Stratospheric airships require a lightweight envelope to contain lighter-than-air (LTA) buoyancy gas, making the lightweight design and pressure-bearing performance of the envelope structure a key research issue. This paper proposes a structural design scheme for a sliding poly-p-phenylene benzobisoxazole (PBO) fiber-rope-reinforced spherical envelope. The aims were to reduce envelope weight and improve pressure-bearing performance while solving the challenges of envelope structural strength. Two types of spherical envelope structures were constructed from Vectran fabric with PBO rope placed in various positions for reinforcement, and subjected to inflatable burst tests. Strain in the seam tape and envelope gores were measured by digital image correlation. A refined envelope structure model was established to simulate the bursting process with consideration of the cutting pattern effect and the mechanical properties of the weld seams. Comparison of the simulation and test results, combined with observations of the tear textures of damaged envelopes, enabled the determination of failure positions. The envelope material at the failure point was disassembled and the micromorphology and microstructure of the bearing layer were observed by scanning electron microscopy (SEM). The process and characteristics of damage origination, propagation, and collection in the envelope material are explained, and the stress behavior and state of the damage positions are analyzed. Based on the study of the mechanical behavior at the failure position, design suggestions for PBO-rope-reinforced spherical envelopes are provided. A strength criterion to incorporate tensile-shear coupling is proposed, which bridges the gap between the uniaxial tensile strength (UTS) and biaxial tensile mechanical properties of the envelope structure.

Research progress and requirement analysis of envelope materials for near space airship

Analysis and Evaluation of Strengthening Effect of Inflatable Rings on Soft Stratospheric Airship

Practical Application and Research Advances of Long-Span Space Structures

Review of Research on Gas Retention Layer Material for Stratospheric Airship Envelope and Helium Permeation in Polymers

Experimental study and refined numerical simulation of ultimate pressure-bearing performance of rope-reinforced airship envelope structures

Investigations of the Mechanical Behavior of Naturally Weathered Envelopes Based on a Long-Term Service Airship

The Developing Conditions and Tendency of Near Space Airship

Applications of Inflatable Structure Technology for Space Exploration

Research on Maritime Transport Technology for Large Spacecraft

Mechanical properties of UN-5100 envelope material for stratospheric airship

Initial Configuration and Nonlinear Mechanical Analysis of Stratospheric Nonrigid Airship Envelope

A critical review on the development and technology of aerostat and airship hull material

Investigation of Mechanical Behavior of Weld Seams of Composite Envelopes in Airship Structures

Pressure-bearing Performance of Sliding Poly-P-phenylene Benzobisoxazole-Rope-reinforced Spherical Composite Envelope Structures

Mechanical Properties and Strength Criteria of Fabric Membrane for the Stratospheric Airship Envelope

Modeling and Simulation Analysis of Stratospheric Airship Envelope

Light weight optimization of stratospheric airship envelope based on reliability analysis

Strength Analysis of Composite Envelope Structures Considering the Tension–shear Coupling and Cutting Pattern Effect

Finite Element Simulation of the Microstructure of Stratospheric Airship Envelopes

Yarn Tensile Experiments and Numerical Simulations Based on the Decomposition of Stratospheric Airship Envelopes

Wet modal analysis and experiment study on an airship envelop