Abstract:It is pointed out that the slip friction in the radial direction exists by the analyses of the corresponding moving tendency and the principle of power transmission at the contact interface of traveling wave type rotary ultrasonic motor(TRUM). Then the contact model is built, which calculates the slip friction in the radial direction. At the same time the friction angle is originally defined, which can describe the extent of the slip friction in the radial direction. So the model representing the complete motor is derived by the integration of the models of stator, rotor and contact interface. Finally the distributed contact forces and the corresponding power losses at the interface are simulated. Moreover the authors investigate the effect from the slip friction in the radial direction on mechanical performance and the simulation by this paper excellently conforms to the results from experiments. However the measured performance could not be fitted well if the three dimension contact mechanism was simplified as is shown in some recent literatures. So it is turned out that slip friction in the radial direction strongly affects mechanical characteristics of TRUM.

Study on the Three Dimensional Contact Mechanism of Traveling Wave Type Rotary Ultrasonic Motor