Abstract:In consideration of the difficulty of monitoring internal deformation in dam model tests, a new optical fiber sensor based on fiber Bragg grating (FBG) technology has been developed. Quasi-distributed FBGs are installed on a slender bar (circular cross-section) along axial direction to make an FBG sensing bar. For the dam physical model in this study, FBG sensing bars can be embedded in predrilled holes within the dam structure and the dam foundation. When the dam is loaded by hydraulic jacks and dam deformations occur, the sensing bar works like an elastic beam under arbitrary transverse and axial loading. According to the bending beam theory, the distribution of both horizontal and vertical displacements can be calculated from the strains measured by the FBGs. The two sensing bars used in the test were calibrated in the laboratory before testing. The calibration results have shown that the displacements measured by the sensing bars were in good agreement with those obtained using other conventional gauges. Recently a two-dimensional gravity dam model was constructed and instrumented with two embedded FBG sensing bars, together with surface mounted displacement transducers and strain rosettes. In the overload test, all the sensors were used to perform real-time monitoring of the model dam deformation. Major monitoring results are presented, compared and analyzed. The displacements measured by the FBG sensing bars in the dam model test are in good agreement with those from displacement transducers. The test results also reveal the deformation mechanism and failure mode of the gravity dam.

Application of FBG strain sensors to experiments of artificial concrete dam models

Application of FBG sensors in rolled concrete dam model

Experimental Study on Models of Artificial Roller Compacted Concrete Dam by Using FBG Sensor

Application of small FBG strain sensors in dam model experiment

Design and application of a fiber Bragg grating strain sensor with enhanced sensitivity in the small-scale dam model

Strain Monitoring By FBG Strain Sensor In a Small Scale Dam Model

Cracking Monitoring by FBG Strain Sensor in the Small Scale Dam Model

Development and application of FBG strain sensor with enhanced sensitivity in the model vibration experiment

Investigation Of Fiber Bragg Grating Strain Sensor In Dynamic Tests Of Small-Scale Dam Model

Study of a Long-Gauge FBG Strain Sensor with Enhanced Sensitivity and Its Application in Structural Monitoring

Application of Fiber Bragg Grating Sensor in Monitoring Concrete Deformations and Cracks

Research On Reinforced Concrete Structural Strain Monitoring By Fiber Bragg Grating

DEFORMATION MONITORING OF DAM MODEL TEST BY OPTICAL FIBER SENSORS

Application of Fiber Bragg Grating Sensor in Geomechanical Model Test of Arch Dam

APPLIED RESEARCH ON MONITORING TENSION OF PRESTRESSED CONCRETE BEAM BASED ON FBG SENSING TECHNOLOGY

Monitoring Internal Displacements of a Model Dam Using FBG Sensing Bars

Application of FBG sensor in clay core wall dam test

Determination of Internal Strain of Concrete Beam Using Fiber Bragg Grating Sensors

Study of FBG Strain Sensors Based on Similar Materiel in Zonal Disintegration Model Test

Sensitivity Enhancement of Long-gage FBG Sensors for Macro-strain Measurements

The experimental study of concrete strain monitoring using packaged fiber Bragg grating sensor