Abstract:M-type strontium hexaferrite (SrM) were successfully synthesized from Sr2+ and Fe3+ precursor salt through co-precipitation technique. Different higher sintering temperatures (800-1000 °C) were used to get the desired SrM with variation of Fe3+/Sr2+ mole ratio as well. The characterization of SrM and its properties were investigated using modern instrumental techniques viz. X-ray diffraction (XRD), Fourier Transform Infrared Spectrometer, Scanning Electron Microscopy, Vibrating Sample Magnetometer, UV-Visible NIR Spectrometer, Impedance Analyzer and Thermal Conductivity Meter. The phase of the synthesized SrM were confirmed by comparing the XRD patterns with the standard ICDD data and Reitvelt Refinement for the SrM having Fe3+/Sr2+ ratio 10 and SrM with distinct annealing temperature were performed. The structural parameters, particle size (75 nm-318 nm) and shape of the as prepared samples were changed with calcination temperature as well as mole ratio. The saturation magnetization (73.77-24.27 emu/g), coercivity (3732.28-642.10 Oe) and remanant magnetization (39.15-8.86 emu/g) were varied with calcination temperature and composition. The dielectric properties, optical properties and thermophysical properties were measured for the SrM keeping Fe3+/Sr2+ ratio 10 calcined at 1000 °C. The synthesized SrM can be applied in magnetic recording media and as photocatalyst due to its low coercivity (2764.48 Oe), high saturation magnetization (73.77 emu/g) and low band gap energy (Eg-2.04 eV) respectively.

Sol-hydrothermal synthesis and characterization of nano strontium cobalt oxide.

Structural Analysis for Preparing Substituted Sr Hexaferrite Nanoparticles by Sol-gel Method

Hydrothermal synthesis of flower-like SrCO3 nanostructures

Sol-gel Synthesis of the Soft Magnetic Compound Oxide of Cobalt and Neodymium and Its Characterization

Solvothermal synthesis and characterization of cobalt sulfide nanocrystals

Hydrothermal synthesis and photoluminescence properties of SrCO3

Composition and shape control of single-crystalline Ba1-xSrxTiO3 (x=0-1) nanocrystals via a solvothermal route

Nanophase Formation of Strontium Hexaferrite Fine Powder by the Sonochemical Method Using Fe(Co)(5)

Preparation and Particle Size Study of Cobalt Substituted Strontium Doped Lanthanum Manganate Films by Sol-gel and Heat Treatment Method

Preparation of nano-sized strontium titanate powder and research on its surface modification process

nvestigation of precursors in the preparation of nanostructured a 0 . 6 Sr 0 . 4 Co 0 . 2 Fe 0 . 8 O 3 − ı via a modified combined complexing method

Study of preparation of cobalt cerium complex oxides catalyst by sol-gel method

Magnetic properties and formation of Sr ferrite nanoparticle and Zn, Ti/Ir substituted phases

SYNTHESIS AND CHRACTERIZATION OF COBALT OXYHYDRATE SUPERCONDUCTORS

Biomimetic Solid‐Solution Precursors of Metal Carbonate for Nanostructured Metal Oxides: MnO/Co and MnO‐CoO Nanostructures and Their Electrochemical Properties

Synthesis of Cobalt Ferrite Nanoparticles and Effect of Doped Lanthanum on Magnetic Properties of Cobalt Ferrite

Preparation of nanosized CoAl2O4 powders by sol–gel and sol–gel-hydrothermal methods

Preparation of nano-sized lanthanum oxide by ultrasonic-homogeneous precipitation method

Preparation of barium strontium titanate Ba(1-x)Sr(x)TiO(3) (0<or= x <or=0.2) single-crystal nanorods by a novel combined method

Investigation of structural, morphological and magnetic properties of nanostructured strontium hexaferrite through co-precipitation technique: Impacts of annealing temperature and Fe/Sr ratio

Sol–gel Synthesis, Magnetic and Magneto-Optical Properties of CoFe2−xTbxO4 Nanocrystalline Films