Abstract:Under different ambient temperatures, the thermal aberration certainly affects the imaging quality of infrared multi-spectral camera. Therefore, an athermalized model of infrared multi-spectral cameras is established, and in this model the ambient infrared multispectral camera is equivalent to a separated dual-lens optical system. In the case of the fixed focal length, the influence of the back focal length on the change of the focal power of the front lens and back lens is analyzed. Now, the variation range of the front and rear lens interval is assumed to be restricted. When the back focal length is smaller than the focal length, the ratio of the absolute value of the focal power of the front lens to the absolute value of the focal power of the back lens decreases with the back focal length increasing. The material of the front lens and the back lens have a longer interval on the thermogram. When the back focal length is greater than the focal length, the scenario becomes exactly opposite. Combined with the judgment method of the positive value and negative value of the focal power on the thermogram, the selection range of materials is constrained by the positive value, negative value, and absolute value of focal power, thus realizing the rapid selection of the optical materials. This method is used to design an athermalized infrared multispectral camera with a waveband of 8–14 μm, a focal length of 50 mm, and an F number of 1.4 in a range from –40 ℃ to +60 ℃. Through the simulation analysis, the value of the athermalized infrared multispectral camera, at the Nyquist frequency of 30 lp/mm reaches 0.39, which is close to the diffraction limit; the root mean square radius of the diffuse spot is smaller than the Airy spot radius of 19.17 μm; the axial aberration is less than 0.02 mm, and the design results show that this method can make the long back-focus infrared optical system maintain stable imaging quality in a large temperature range. The SF6 gas is detected experimentally, and the experimental results demonstrate the excellent optical performance of the system.

Thermal design and analysis for the high resolution visible light aeronautic camera

Thermal Analysis and Design of the Aerial Camera’s Primary Optical System Components

Influence of temperature on infrared optical system and athermal design

Design of A Panoramic Long-Wave Infrared Athermal System

Athermal design of long-wave infrared optical system with hybrid refractive/diffractive

Thermal Design For High Density Avionics Package

Engineering Design of an Active–Passive Combined Thermal Control Technology for an Aerial Optoelectronic Platform

Design of Athermalized Wide-Angle Low-Distortion Lens Using Freeform Surface

Design of Infrared Hybrid Athermal Optical System

Thermal design and experimental verification of the space ultraviolet wide field of view multi-channel scanning imager

Lumped Parameter Thermal Network Modeling and Thermal Optimization Design of an Aerial Camera

Design of Athermalization for Dual-Band Infrared Optical System Based on Harmanic Diffraction

Application of Athermalisation in Optical Systems

Thermal design and simulation analysis of electronic controlling cabinet in space camera

Optimization of Thermal Control Design for Aerial Reflective Opto-Mechanical Structure

On-orbit thermal deformation prediction for a high-resolution satellite camera

Analysis of Influence of Long Back Focal Length on Athermal Design Based on Infrared Multispectral Camera

Passive Athermalisation in Infrared Optical Systems

Thermal Analysis of Large Telescope Structure

Athermal panoramic annular lens design with a thermal analysis method

Athermal Design And Analysis Of Glass-Plastic Hybrid Lens